Bluetooth Remote Camera Shutter For Apple IOS And Android
⭐⭐⭐⭐⭐ Over 13 000 orders to 151 Countries
- KITE LINE MOUNT
- ACCESSORIES
- FREEBIES
-
- PRODUCT DETAILS
PRODUCT DETAILS
Selfie Stick Wireless Bluetooth – Compatible with Remote Control Camera Shutter for All IOS & Android Mobile Phone
Instructions to Uses
1. Pairing a) Turn on the shutter by toggling the on/off button, the shutter will enter into pairing mode, and the LED starts quickly at the same time.B. Activate the Bluetooth compatible function on your phone and source devices around
A. Select the device from “AP Shutter 3” from the list and the splitting will be completed automatically in a few seconds.2. Select the app Use the inbuilt camera app to take photos via APP shutter, or you can download the app from “Camera 360” from Google Play If the inbuilt camera cannot be supported, check the compatible device and the app in the following instructions.
3. Shooting Select the correct app and press the appropriate button on the shutter for IOS and Android phones to take photos.
What’s in the box
1 x Bluetooth Camera Shutter RemotePlease note that the bluetooth remote is not waterproof and is designed to be used inside the GDome Mobile and Mobile Pro.
Bluetooth Remote Camera Shutter For Apple, IOS And Android
Default Title
Location Shipping time USA/ Canada 4 – 10 Days Australia 4 – 10 Days Europe 4 – 10 Days Delivery Info
- All orders for GDOME customers are manufactured and shipped from South Africa.
- You’ll get an automated tracking number when your order has been dispatched.
- Delivery times are faster for metro areas than regional. The shipping times above are estimates and some orders can take longer due to factors outside of our control.
Duties
- Please note some international orders will occasionally be charged customs or import charges upon arrival in the destination country. We are not responsible for these charges. This includes Local VAT.
- If you are ordering from United States of America, import duties will not be charged for orders under $800.
- If you are ordering from Australia, import duties will not be charged for orders under A$1000.
Can you ship to me?
We have shipped our awesome water housings to almost every country!
Express COURIER:- We deliver directly to your home or office, anywhere in the world with DHL or Fedex Express.
- We are currently averaging 3-9 working days for express international deliveries.
ABOUT OUR SHIPPING
We offer a 100% reliable delivery services via trusted DHL / Fedex Express courier services around the world.
- Shipping is calculated automatically by DHL on checkout.
- DHL will also give you a live view of the estimated delivery time.
- We also offer a variety of affordable priority and FREE shipping options, these do take slightly longer than or express options.
- We’ll need your daytime address and cellphone number for door-to-door delivery and, once sent, provide you with the tracking number for the parcel.
- All Prices exclude your local taxes and duties, please check your local taxes and duties before placing your order.
- We cover all shipping costs but do not cover local taxes (such as VAT, customs duties ect).
If you would like to calculate the taxes and duties, click HERE
We shall use our best endeavors to ensure that all products purchased on the GDOME SHOP website will be delivered to major city centers within the estimated shipping time.
We offer a reliable delivery services via trusted DHL Express courier services around the world.
Shipping is calculated automatically by DHL on checkout before you have to make payment.
DHL will also give you a live view of the estimated delivery time.
We also offer FREE shipping options to select locations, these do take slightly longer than or express options.
We’ll need your daytime address and cellphone number for door-to-door delivery and, once sent, provide you with the tracking number for the parcel.
All Prices exclude your local taxes and duties, please check your local taxes and duties before placing your order.
- We cover all shipping costs but do not cover local taxes (such as VAT, customs duties ect).
GDome ships exclusively through DHL International and TUNL for International orders.
By purchasing items from GDome, you acknowledge that GDome is not responsible for lost or stolen packages.
Please refer to your tracking number to get details of where your shipment is. If your package shows it was successfully delivered, and you did not receive it, please contact us immediately.
Insurance for packages is charged separately by DHL and TUNL, we offer the option to insure your package with Shipping Protection on checkout.
By deselecting Shipping Protection, GDome is not liable for items that are lost, damaged, or stolen during shipping.
HOW DO I TRACK MY ORDER ONLINE?
Once we’ve received your order, we’ll send you an email with LIVE tracking details with the company it was sent out with.
RETURNS
GDome offers a 14-day (once received) return policy for new items purchased directly through our online store or at our physical store.
GDome will only provide exchanges or store credit for change of mind or incorrectly ordered products. GDome will not refund any shipping and credit card costs.
GDome purchases made at www.
getgdome.com can be returned for any reason within 14 days of receiving the product/s.All returned items must be in new, resalable condition and include original packaging and all hardware and or accessories.
Return shipping costs are for your expense, you can send it back using any means from courier to postal service (there is no time limit, you just need to inform us of the return within the first 14 days).
After 14 days, non-warranty related returns are at the SOLE DISCRETION of GDome.
If the reason for your return is not because of a GDome error, any shipping costs and handling fees, incurred by GDome may be deducted from your refund.
Please note: if you return an item and did not originally pay shipping costs (FREE SHIPPING), the shipping cost incurred by GDome will be deducted from your refund, we will supply you with the shipping invoice as per what we paid on request.
Returns are to be sent to:
Action Distribution (attention: Allison Bell)
6 Hely Road, Ndebeni, Cape Town, South Africa, 7405.
+27 84 559 0801
Please mark the item as a return for refund and give it a value of $5.
Please see our full return policy here.
EXCHANGE
If you would like to exchange your items for something else, please return to us for a refund and place a new order for the product you want at the same time. All items that you would like to exchange must be in a new, resalable condition and include original packaging and all hardware and or accessories.
When choosing a shipper to return products, keep in mind that GDome cannot be held liable or responsible for items lost in transit. We recommend using a carrier that can provide tracking and insurance.
Please indicate your GDome invoice number clearly on the shipping label.
REFUND
After 14 days, non-warranty related returns are at the SOLE DISCRETION of GDome. Products must be shipped to our warehouse and will be checked. If your returned product has been checked and the products are not in a new, re-sellable condition, a repackaging, restocking, and/or damaged goods fee may be deducted from the refund or the product will be shipped back to you.
We strongly urge you to repackage the products with care. If you need advice on how to re-pack the gear, please contact us.It generally takes 3 – 5 days after the package arrives at our warehouse for your return to be processed and a credit to be issued.
As soon as the return is processed you will get an email confirmation.
THE FINE PRINT
GDome gives its utmost to serve customers as quickly as possible.
In actual fact, it excites us to do it quicker every day.
It is, however, a reality that delivery companies are sometimes subject to strikes and other delays.
It is most certainly in the minority that a problem arises.
Should any delay happen, we will follow up, lodge and handle queries with the particular courier company.
If you have any queries please contact [email protected] or phone us at +27 84 559 0801.
Feel free to read our complete terms and conditions
getgdome.com can be returned for any reason within 14 days of receiving the product/s.
We strongly urge you to repackage the products with care. If you need advice on how to re-pack the gear, please contact us.Recently Viewed Products
{{fens_main_product}}
-
{{fens_offer_product}}
Impulse: Bluetooth remote camera control for iPhone & more
Impulse: Bluetooth remote camera control for iPhone & more | JOBY
The store will not work correctly when cookies are disabled.
JavaScript seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Javascript in your browser.
Skip to main content
Multidevice
$19.95
Skip to the end of the images gallery
Skip to the beginning of the images gallery
- Overview
- Description
- Specifications
- Reviews
Description
Upgrade your mobile photography with the new JOBY Impulse™.
Take the ultimate selfies, include yourself in group photos and capture creative angles with this certified Bluetooth® remote camera control for iPhone & Android smartphones.
Specifications
Additional Information
Metric
Imperial
Additional Information
-
Weight
0.01 kg
0.02 lbs
-
Devices
Large Phone, Small Phone
Large Phone, Small Phone
-
Material
ABS Plastic
ABS Plastic
-
Dimensions
2.
6 x 3.2 x 1 cm1.02 x 1.26 x 0.39 in
6 x 3.2 x 1 cm-
manual
JOBY Impulse™ JB01473-BWW pdf
JOBY Limited Consumer Warranty
This limited consumer warranty covers any defects in material or workmanship in the new JOBY product accompanied by this warranty statement. This warranty does not affect or modify any warranty provided by the JOBY retailer nor does it affect any additional rights you may have under the laws of your jurisdiction.
Creator blog
Tips from the community
Discover our guides
The latest news
-
The best tripods for travel vlogging
Whatever you’re creating on your travels, there’s always a tripod suited to you. This article helps you figure out which one that is by taking a look at four of the best…
June 26, 2023
Josh Edwards
Vlogging
4 min read
335 view(s)
-
Express Your True Creative Colors with JOBY: Best Gear to Share Your Pride!
As a creator, I can’t wait to hit the streets and show my online community just how proud I am of being myself.
So today, I want to spill the tea and share my top three…June 24, 2023
Florian
Sip on this
3 min read
101 view(s)
-
Tips to make your social media content stand out
Ever wondered how content creators and influencers make their content look so slick? The answer lies in the visual strategy and photography kit – including photography…
June 22, 2023
Sip on this
6 min read
107 view(s)
-
Tips to Take Your Vlog to the Next Level
Creating a vlog is not quite as simple as it looks.
There are a few points you need to consider if you’re looking to improve your vlog or get your new venture off to a…June 12, 2023
Vlogging
9 min read
157 view(s)
So today, I want to spill the tea and share my top three…
There are a few points you need to consider if you’re looking to improve your vlog or get your new venture off to a…Connecting to KeyMission 360 | SnapBridge 360/170 Online Manual
Before you can view or upload pictures to the camera, you must establish a network connection between the camera and the smart device. If devices are paired using SnapBridge 360/170, a Bluetooth connection is established.
Make sure the camera firmware is up to date. The latest version can be downloaded from the Nikon Download Center.
At default settings, the camera will turn off automatically if no operations are performed for approximately one minute. Until you are fully familiar with the camera and the application, it is recommended to increase the auto-off delay to 5 minutes by selecting 5 minutes to Camera settings > Auto off in the Camera tab of the SnapBridge 360/170 application.
- Before pairing
- Pairing (devices without NFC)
- Pairing (devices with NFC)
- If pairing fails
Before pairing
Prepare the camera and smart device. Before using the camera:
- Check that the battery is sufficiently charged to prevent the camera from turning off unexpectedly.
- Turn off airplane mode.
- Insert a memory card, making sure it has enough space.
- Make sure the HDMI cable and USB cable are disconnected.
Make sure you have installed the SnapBridge 360/170 app before using your smart device.
Keep in mind that SnapBridge 360/170 is not a complete SnapBridge replacement; only SnapBridge 360/170 can be used with KeyMission 360.
Pairing (devices without NFC)
-
Camera : Make sure the camera is turned off and the power indicator is off.
If the camera is on (ie, if the power indicator is on), press the movie button for about 3 seconds to turn off the camera.
-
Smart device : turn on Wi-Fi and Bluetooth, but not start pairing.
-
Smart device : Launch SnapBridge 360/170 and tap Connect to camera in the tab Connect .
-
Smart Device : Touch KeyMission 360 .
-
Smart device : Touch Next .
-
Camera : Press the movie button for about 7 seconds to initiate pairing (A start-up beep will sound after about 3 seconds; ignore this beep and keep pressing the button). The status indicators will flash green quickly and simultaneously, and then flash alternately to indicate that the camera is ready for pairing.
-
Smart device : Touch the camera name.
When pairing is completed, the smart device will connect to the camera via Bluetooth and the following message will appear.
After preparing for pairing, the camera will wait for about 4 minutes and then turn off automatically and the power indicator will turn off. If this happens, turn off the camera, and then press and hold the movie button for about 7 seconds to prepare the camera for pairing again.
If you are pairing with a camera for the first time after installing SnapBridge 360/170, you will be prompted to register for a Nikon ID.
Follow the instructions on the screen. You can also register for a Nikon ID or edit your profile using the Nikon ID register/edit profile option under the Other tab. Touching any of the following options will end pairing, in which case you will need to pair the camera and smart device again.
- Wi-Fi connection type > End pairing
- Camera settings > Reset all
- Camera settings > Options menu network > Restore nast-ki on the mind.
Follow the instructions on the screen. You can also register for a Nikon ID or edit your profile using the Nikon ID register/edit profile option under the Other tab. Pairing (devices with NFC)
-
Camera : Make sure the camera is turned off and the power indicator is off.
If the camera is on (ie, if the power indicator is on), press the movie button for about 3 seconds to turn off the camera.
-
Smart device : turn on Wi-Fi, NFC and Bluetooth, but not start pairing.
-
Smart device : Exit all applications that use NFC, including SnapBridge 360/170, otherwise pairing may fail.
-
Camera : Press the movie button for about 7 seconds to initiate pairing (A start-up beep will sound after about 3 seconds; ignore this beep and keep pressing the button). The status indicators will flash green quickly and simultaneously, and then flash alternately to indicate that the camera is ready for pairing.
-
Smart device : Touch the NFC antenna to the logo (N-Mark) of the camera.
SnapBridge 360/170 will start automatically. When prompted, touch OK to start pairing. When pairing is completed and a Bluetooth connection is established, the dialog shown below will appear.
After preparing for pairing, the camera will wait for about 4 minutes and then turn off automatically and the power indicator will turn off.
If this happens, turn off the camera, and then press and hold the movie button for about 7 seconds to prepare the camera for pairing again. If you are pairing with a camera for the first time after installing SnapBridge 360/170, you will be prompted to register for a Nikon ID. Follow the instructions on the screen. You can also register for a Nikon ID or edit your profile using the Nikon ID register/edit profile option under the Other tab.
Touching any of the following options will end pairing, in which case you will need to pair the camera and smart device again.
- Wi-Fi connection type > End pairing
- Camera settings > Reset all
- Camera settings > Options menu network > Restore nast-ki on the mind.
If this happens, turn off the camera, and then press and hold the movie button for about 7 seconds to prepare the camera for pairing again. If pairing fails
If pairing fails, press and hold the video button on the camera for about 3 seconds to turn off the camera, and then, after confirming that the camera’s power indicator is off, exit the SnapBridge 360/170 app and check that it is not running in the background (the procedure may vary depending on the smart device; see the documentation that came with the device for more information), and follow the same steps for the SnapBridge app if it is currently works.
You can then repeat the steps in “Pairing (devices without NFC)” or “Pairing (devices with NFC)” to pair the camera with the smart device.
Make sure the camera firmware is up to date. The latest version can be downloaded from the Nikon Download Center.
At default settings, the camera will turn off automatically if no operations are performed for approximately one minute. Until you are fully familiar with the camera and the application, it is recommended to increase the auto-off delay to 5 minutes by selecting 5 minutes for Camera settings > Auto off. in tab Camera SnapBridge 360/170 applications.
- Before pairing
- Pairing
- If pairing fails
Before pairing
Prepare the camera and smart device. Before using the camera:
- check that the battery is sufficiently charged to prevent the camera from turning off unexpectedly.
- Turn off airplane mode.
- Insert a memory card, making sure it has enough space.
- Make sure the HDMI cable and USB cable are disconnected.
Make sure you have installed the SnapBridge 360/170 app before using your smart device. Keep in mind that SnapBridge 360/170 is not a complete SnapBridge replacement; only SnapBridge 360/170 can be used with KeyMission 360.
Pairing
-
Camera : Make sure the camera is turned off and the power indicator is off.
If the camera is on (ie, if the power indicator is on), press the movie button for about 3 seconds to turn off the camera.
-
Smart device : turn on Wi-Fi and Bluetooth, but not start pairing.
-
Smart device : Launch SnapBridge 360/170 and tap Connect to camera in tab Connect .
-
Smart Device : Touch KeyMission 360 .
-
Smart device : Touch Next .
-
Camera : Press the movie button for about 7 seconds to initiate pairing (A start-up beep will sound after about 3 seconds; ignore this beep and keep pressing the button). The status indicators will flash green quickly and simultaneously, and then flash alternately to indicate that the camera is ready for pairing.
-
Smart device : Touch the camera name.
-
Smart device : read the instructions and touch Clear .
-
Smart device : When prompted to select an accessory, tap the camera name (it may take some time before the camera name is displayed).
When pairing is completed and a Bluetooth connection is established, the dialog box shown below will appear.
After preparing for pairing, the camera will wait for about 4 minutes and then turn off automatically and the power indicator will turn off. If this happens, press the video button or photo button to reactivate the camera and prepare it for pairing again. If the camera does not return to the pairing standby state, turn off the camera and press the movie button for about 7 seconds.
If you are pairing with a camera for the first time after installing SnapBridge 360/170, you will be prompted to register for a Nikon ID. Follow the instructions on the screen. You can also register for a Nikon ID or edit your profile using the Nikon ID register/edit profile option under the Other tab.
Touching any of the following options will end pairing, in which case you will need to pair the camera and smart device again.
- Wi-Fi connection type > End pairing
- Camera settings > Reset all
- Camera settings > Options menu network > Restore nast-ki on the mind.
If pairing fails
If pairing fails, press the movie button on the camera for about 3 seconds to turn off the camera, and check that the camera’s power indicator is off. Exit the SnapBridge 360/170 app and make sure it is not running in the background (procedure may vary depending on the smart device; see the documentation that came with the device for more information) and follow the same steps for SnapBridge app if it works, then follow the steps below to forget the camera on your iOS device. After that, you can repeat the steps in the “Pairing” section to pair the device with your camera.
-
Open the iOS Settings app and tap Bluetooth .
Touch the icon located to the right of the camera name.
Touch the “forget” option.
Remote Camera via Wi-Fi and Bluetooth
Description
With the app “Remote Camera via Wi-Fi and Bluetooth” you have the UNIQUE ability to shoot from a distance on the iPhone\iPad, which acts as a “Remote Camera” and SEND control commands to shoot and VIEW the received photos on the iPhone\iPad , which acts as a “Control Panel” in the range of your Wi-Fi network or Bluetooth.
To do this, you need to install the application on two or more devices at the same time.
Any device can act as a “Remote Camera” or “Remote Control”.
The “Remote Camera via Wi-Fi and Bluetooth” application gives you a UNIQUE ability to shoot remotely and independently.
All you need is to fix iPhone\iPad in the chosen place.
Now you don’t have to use various timers or ask strangers to take pictures.
To connect devices you can use:
– Internal Wi-Fi connection
– Bluetooth connection
– Wi-Fi Hotspot connection, which is activated on the device acting as a “Remote Camera”. This mode is used when there is no Wi-Fi network.
Once the devices have established a connection, you can change the shooting modes of the “Remote Camera”:
– Turn the flash on or off
– Select the front or rear camera
– Change the image quality
How the application works:
– Launch the application on the first device and select the mode – CAMERA. The operating mode of the application “Camera \ Remote” is displayed in the top status line of the application.
– Launch the application on the second device and select the mode – REMOTE
– When switching from the “Remote Camera” mode to the “Remote Control” mode, a menu for selecting available devices will appear. Switching the mode is done by scrolling the screen to the right or left.
– After a connection is established, the indicator will change color from red to blue, signaling an established connection.
By default, the network that has the higher data rate is used. If you need to use the Bluetooth connection on your devices, you need to turn off the Wi-Fi mode.
– Select the type of camera you are using and the flash mode
– Press the “CAPTURE” button. After the “Remote Camera” takes a photo, the transfer of the photo to the “Remote Control” will begin.
ATTENTION!
In order to significantly reduce the time of image transmission from the “Remote Camera” to the “Control Panel”, the image is compressed.
This allows you to view the received photos on the “Remote Control” much faster when using a Bluetooth connection.
Images in original quality are always located on the device acting as “Remote Camera”.
Version 12
The app has been updated by Apple to display the Apple Watch app icon.
– Fixed large image transmission error
– Improved transfer rate Photo
Ratings and reviews
ratings: 6
No preview
Taking pictures, but why is there no picture from the camera on the second device? Just black screen
Complete rubbish!!!
Don’t buy….it’s better to use a timer than this program…
Does not work
This app is not working. Don’t buy it! Do not buy! Does not work!
Developer EAST TELECOM Corp. did not inform Apple about its privacy policy and data processing methods used by it.