6.5 speakers: The Best 6.5-Inch Speakers for 2023

The Best 6.5-Inch Speakers for 2023

If you spend lots of time in your car, a good set of speakers is a worthwhile investment. A great-sounding car stereo system makes a long commute, or a drive across the country, a more enjoyable experience. 

The best place to start is by replacing your stock speakers. Most standard car speakers are about 6.5 inches in diameter, so finding a good set of speakers in that size range means you can install a replacement set with minimal modifications. There are lots of choices in this size to fit every need or budget. Additionally, some of these speakers are good options if you’re looking to upgrade the sound on your boat or motorcycle. 

In this review, we’ll cover the best 6.5-inch speakers, including our recommendations for best value, best sound quality, and other categories. 

Best Overall: Rockford Fosgate R165X3
Best for Sound Quality: Hertz HCX 165
Best Value: JBL CLUB6520
Best Factory-Replacement: Infinity REF6522IX
Best All-Weather: Polk DB652
Best for Bass: Alpine R-Series R-S65

How We Picked the Best 6. 5 Speakers

One of my first cars was a 1982 Toyota Celica with a factory OEM seven-band equalizer and blown speakers. Upgrading to four new Polk 6.5-inch speakers improved the sound quality dramatically. Since then I’ve always believed a good set of speakers is the best way to upgrade your car’s sound quality. 

To compile this list, I looked at 10 to 15 brands of 6.5-inch speakers and reviewed them based on sound quality, build quality, power, and price. I also looked at speakers that provided a good upgrade over the factory OEM speakers and sounded good with or without added amplification. Whether you just want to upgrade the sound in your factory stereo or plan to upgrade it in the future, it’s always better to go with the best 6.5-inch speakers that can handle either. 

You’re not going to get a lot of bass out of a 6.5-inch speaker, so it’s better to look for clarity in the mid- and high-frequency ranges. If you want low-end bass, the best solution is to add a subwoofer and avoid overpowering your 6. 5-inch speakers. 

Finally, price is always a consideration, and there are always trade-offs. But upgrading your 6.5-inch speakers is one of the most cost-effective ways of upgrading the sound of your car stereo. And you can’t go wrong with any of these picks. 

The Best 6.5 Speakers: Reviews and Recommendations

Best Overall: Rockford Fosgate R165X3

All-Around Winner. Rockford Fosgate

Why They Made The Cut: The Rockford Fosgate R165X3 speakers combine great sound quality for factory and aftermarket stereos at a great price, which makes it the top pick.

Specs:
Type: Three-way coaxial
Frequency Response: 52Hz (hertz)–20kHz
Power: 45 watts RMS / 90 watts peak

Pros:
— Great sound across all frequencies
— Ideal for factory and aftermarket stereos
— Easy to install
— Durable and well-built 

Cons:
— May require an amplifier for best sound quality 

The Rockford Fosgate R165X3 speakers are the top choice if you’re looking for a great set of speakers for a wide variety of factory and aftermarket applications. The three-way coaxial stereo speakers can handle 45 watts of RMS power or 90 watts of peak power. They provide great quality sound, are well-built, and are easy to install. 

Each speaker has a tiny half-inch silk dome piezoelectric tweeter, providing responsive high-frequency audio. The three-way coaxial configuration offers a better range and more natural sound quality. 

The only downside is these speakers might not provide the best sound quality when paired with a low-powered factory head unit. To get the best sound, you’ll want a head unit or amplifier that provides close to the 45-watt power rating of these speakers. 

There are better-quality speakers out there that cost more money, but the Rockford Fosgate R165X3 speakers provide the best combination of sound quality, durability, and price. 

Best for Sound Quality: Hertz HCX 165

Strong Sound. HERTZ

Why They Made The Cut: For the best 6.5-inch speakers with amazing sound quality, choose the Hertz HCX 165.  

Specs:
Type: Three-way coaxial
Frequency Response: 50Hz–22kHz
Power: 100 watts RMS / 200 watts peak

Pros:
— Crisp sound across all frequencies
— Clear, strong sound for low frequencies
— Bright, clear sound for high frequencies
— Tweeters can be turned and adjusted 

Cons:
— Expensive
— Do not come with grilles or covers

Hertz offers some of the best-quality speakers you can buy, and the HCX165 speakers are no exception. They provide amazingly clear, high-quality sound thanks to their oversize magnets and pure copper voice coils. The cones are well-engineered to provide exceptional, long-lasting performance. 

The HCX165 speakers handle an impressive 100 watts RMS and 200 watts of peak power to generate loud, clear sound. The tweeters feature a rotary function that allows you to adjust their direction, customizing the sound to your preferences. 

Price is the only major drawback, but in this case, you get what you pay for. The only other concern I have is the lack of a grille or speaker cover for protection. You can fit these speakers behind a factory speaker cover or find an aftermarket one, but that hides the cool rotating-tweeter function. 

You can spend less money and get speakers that are almost as good, but when it comes to high-powered, high-fidelity audio, nothing else sounds as good in a 6.5-inch package.

Best Value: JBL CLUB6520 

Excellent Value. JBL

Why They Made The Cut: The JBL CLUB6520 speakers offer the best combination of low price and good sound quality. 

Specs:
Type: Two-way coaxial
Frequency Response: 50Hz–20kHz
Power: 50 watts RMS / 150 watts peak

Pros:
— Good sound quality
— Great price
— Easy to install 

Cons:
— Lacks low-end bass response
— Mounting hardware isn’t the best quality 

The JBL CLUB6520 speakers are a great value option. They provide better sound quality than factory speakers and are easy to install. These durable two-way coaxial speakers are made with UV-resistant polypropylene and will handle years of use. The 50 watts of RMS power and 150 watts of peak power allow them to provide clear treble and midrange sound at high volumes. 

The only drawbacks are due to the low price. The two-way coaxial speakers lack a low-end bass response, which can be resolved by adding a subwoofer. There have also been complaints about the quality of the mounting hardware, especially the screws. 

But if you’re looking for improved sound quality for a reasonable price, the JBL CLUB6520 speakers are a great choice. 

Best Factory-Replacement: Infinity REF6522IX

Well-Built. Infinity

Why It Made The Cut: If you’re looking to upgrade your factory speakers, the Infinity REF6522IX speakers are the top pick. 

Specs:
Type: Two-way coaxial
Frequency Response: 53Hz–21kHz
Power: 60 watts RMS / 180 watts peak

Pros:
— Great-sounding speakers with excellent mid- and high range
— Excellent build quality
— Universal mounting brackets
— Sound great with a factory OEM head unit and no additional amp

Cons:
— Short wiring connectors
— Lacks low-end bass response 

If you’re looking to replace your factory OEM speakers, the Infinity REF-6522IX speakers are a great option. The full-range coaxial drivers include oversize woofer cones that deliver high bass output. One-inch dome tweeters provide clear highs and include an adjustable tweeter output level. The speakers offer 60 watts RMS and 180 watts peak and provide loud, clear midrange sound when connected to a factory head unit or amplifier. 

The only drawback is a lack of low-end bass response, especially when using these speakers with unamplified factory OEM head units. Additionally, the wiring connectors are short, making it difficult to hook the speakers up. However, the speakers do come with two different mounting brackets, making them easy to install.  

Drawbacks aside, the Infinity REF-6522IX speakers are one of the best ways to upgrade the sound of your factory head unit with or without added amplification.

Best All-Weather: Polk DB652

Loud and Clear. Polk Audio

Why It Made The Cut: The Polk DB652 speakers provide great sound and are built to handle all weather conditions.  

Specs:
Type: Two-way coaxial
Frequency Response: 40Hz–22kHz
Power: 100 watts RMS / 300 watts peak

Pros:
— Marine-rated waterproof
— Well-built to handle all weather
— Clear and loud, with great sound quality

Cons:
— Lacks low-end bass response 

If you need an all-weather speaker for your motorcycle, ATV, boat, or other watercraft, the Polk DB652 speakers are a dependable option. Marine certified, these speakers are made to withstand the toughest weather conditions. 

They sound great as well. With a frequency response of 40 hertz to 22 kilohertz, these speakers are loud and clear with a clean sound across a wide frequency spectrum. With 150 watts RMS power and 300 watts peak power, they also complement amplified systems and subwoofers. 

Like most two-way coaxial speakers, the Polk DB652 speakers lack low-end bass response. But if you want the best speakers for the elements, look no further.

Best for Bass: Alpine R-Series R-S65

Power Player. Alpine

Why It Made The Cut: Alpine’s R-Series R-S65 speakers provide the best low-end bass with great overall sound quality for 6.5-inch speakers. 

Specs:
Type: Two-way coaxial
Frequency Response: 65Hz–29kHz
Power: 100 watts RMS / 300 watts peak

Pros:
— Great bass sound
— Excellent overall sound quality
— Work great with amplified stereo systems

Cons:
— On the expensive side

Most speakers on this list lack good low-end bass response — but not the Alpine R-Series. They provide premium sound quality with excellent low-end bass response. 

They are also a good choice for amplified systems. With 100 watts of RMS power and 300 watts of peak power, they can handle lots of power. One-inch tweeters provide clear highs, while the woofers and rubber surrounds deliver bass with minimal distortion. 

The price is on the expensive side, as there are lower-priced options that deliver as good or better high- and mid-range sound. But if you want bass from a 6.5-inch speaker, this is where it’s at. 

Things to Consider Before Buying The Best 6.5-Inch Speakers

Choosing the best set of 6.5-inch speakers starts with your budget, as well as the following three things: 

Power 

Measured in watts, power determines volume. But there’s more to it than just picking out the most powerful speakers. In addition to evaluating root mean square (RMS) vs. peak power for the speakers, you’ll need to consider how much power your stereo cranks out. 

If you’re building a new stereo system with amplifiers and subwoofers, it makes sense to go with the best quality, most powerful speakers you can afford. However, if you’re keeping your factory head unit, you’ll want to buy speakers that are matched to your existing stereo’s output. 

Sound Quality

Sound quality is subjective and different for everybody, and a lot of it comes down to personal preference. That said, sound quality also depends on the type of speaker and how it handles different ranges of sound frequency.  

Coaxial speakers are full-range speakers that combine the speaker with a woofer and tweeter in one design. Most 6.5-inch speakers are either two-way speakers, meaning they have a woofer and tweeter, or three-way speakers with a separate woofer, tweeter, and midrange component. These types of speakers are the most common. They offer good midrange sound and are easier to install. 

Component speakers separate out the woofers and tweeters from the midrange speaker, providing better high- and low-range sound than coaxial speakers. These types of speakers have better sound quality but are more expensive and harder to install. 

Durability

Build quality and durability determine not only the sound quality but how long your speakers will provide good-quality sound. Door-mounted speakers live a hard life, getting rattled every time you shut the door and exposed to extreme temperatures. So while it’s tempting to get cheaper speakers, you may save money in the long run by buying more durable speakers, which last longer.  

Related: Best Speaker Wires

FAQs

Q: How do I get more bass out of my 6.5 speakers?

The best way to add bass is with a subwoofer, or to upgrade your speakers. However, if you’re looking for more bass from your 6.5-inch speakers alone, you can do the following:

— Adjust your stereo’s equalizer to provide more low-end sound
— Add sound deadening around the speaker
— Isolate the speaker with a rubber gasket

Q: Are 6 and 6.5 speakers the same? 

The only difference is size — the 6 speakers are six inches in diameter, and the 6.5 speakers are 6.5 inches in diameter. Both sizes are comparable in sound, but one size may be a better fit for your vehicle. 

Q: What size speakers are best?

The best size depends on how large of a speaker you can fit. The most popular are 6.5-inch and 6×9-inch speakers. They provide good sound, high- and midrange sound quality, and even some decent bass. Typically 6.5-inch speakers are the best option for door installation, and 6×9-inch speakers are a good option for the back seat. 

Q: Can you make cheap speakers sound better? 

There are a few things you can do to improve the sound quality of cheap speakers:

— Select a prime location: good placement improves sound quality
— Add an equalizer or inline capacitor to reduce the frequency spectrum that sounds bad
— Add an amplifier that matches your speakers’ RMS output

Q: What should the midrange be set to in a car? 

It depends on what you’re listening to and your preference. Most people think music sounds better with the midrange set to 0 and the bass and treble set to +4 and +5. 

Q: How big of a hole do I need for a 6.5 speaker? 

Most 6.5-inch round speakers have a 5-inch hole opening. If you are installing new 6.5-inch speakers to replace old 6.5-inch speakers, they should fit the same hole. If you need to cut a hole to install new speakers, you’ll want to use a 5-inch hole saw.  

Q: What are 6.5 speakers good for? 

These speakers provide good high- and midrange sound. They fit most car doors and are an ideal complement to 6×9-inch speakers or a subwoofer. 

Final Thoughts on the Best 6.5 Speakers

Best Overall: Rockford Fosgate R165X3
Best for Sound Quality: Hertz HCX 165
Best Value: JBL CLUB6520
Best Factory-Replacement: Infinity REF6522IX
Best All-Weather: Polk DB652
Best for Bass: Alpine R-Series R-S65

The Rockford Fosgate R165X3 speakers are the best overall pick, offering great sound quality at a reasonable price. For the ultimate sound, the Hertz HCX 165 can’t be beaten. Check out the JBL CLUB6520 or Infinity REF6522IX if you want a great speaker to work with your factory OEM head unit. And if you need something to brave the elements, you can’t go wrong with the Polk DB652. 

Why Trust Us

Let’s get one thing out of the way: Online shopping is hard. Search for any product and you’ll be confronted with dozens (if not hundreds or thousands) of choices. Our mission at Futurism, where we cover the latest technology, is to simplify this experience by researching, testing, and continuing to evaluate products so we only recommend choices that are actually worth your time.

This post was created by a non-news editorial team at Recurrent Media, Futurism’s owner. Futurism may receive a portion of sales on products linked within this post.

Share This Article

Power 6.5″ 2-Way Euro Fit Full Range Speaker

The Power T1650 is a T1 full-range speaker system with a coaxially mounted tweeter and a true 6.5″ midrange optimized for a wide variety of U.S., European, and import vehicles.

Read More

1 Review

Find Dealer

Not sure what size you need?

FIND MY SPEAKER SIZES

OverviewTechnologiesSpecificationsSupportAccessories

Overview

Get Power series sound quality in a drop-in speaker. These 6.5” 2-way full-range speakers inherent all the coolest features from – their big brother – the T1 component systems. Features include a bridge-mounted tweeter and are optimized for a wide variety of U.S., European, and import vehicles. Be prepared, these are more than OEM replacement speakers, their sound quality has been perfected for true Rockford Fosgate fanatics!

FEATURES AT A GLANCE

  • Injection molded carbon fiber filled polypropylene cone
  • 1″ treated aluminum dome tweeter
  • VAST vertical attach surround technique increases effective radiating cone area up to 25%
  • Santoprene rubber surround
  • High temp aluminum voice coil
  • Linear high excursion matched motor magnetics and suspension design
  • Stamp-cast aluminum frame
  • Fatigue and tear resistant poly cotton spider
  • FlexFit 2 mounting
  • Integrated concealed 12dB/Octave crossover components
  • Grilles and mounting hardware included
  • 1 Year Warranty

Technologies

CEA-2031

This means your speaker has the capacity to handle power under continuous demand, not instantaneous power handling, that over time, can damage voice coils.”>Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.

Learn more

x

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.

Klippel Verified

“>Klippel is a speaker certification program allowing us to deliver the best possible speakers.

Learn more

x

Klippel Verified

Klippel is a speaker certification program allowing us to deliver the best possible speakers.

ICC Crossover

The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier …

Learn more

x

ICC Crossover

The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier installation.

VAST Surround (speakers)

The Vertical Attach Surround Technique significantly increases a subwoofer’s effective radiating cone area up to 25%.

Learn more

x

VAST Surround (speakers)

This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing), which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved. <br><br>The new patent-pending VAST™ technique is a result of combining a unique design concept with precise manufacturing to provide up to 25% more effective radiating cone area.<br>”>The Vertical Attach Surround Technique significantly increases a subwoofer’s effective radiating cone area up to 25%.

FlexFit 2 Basket – Speaker

The slot mounted frame pattern allows for variable adjustments to the mounting position, especially for Euro-Fit …

Learn more

x

FlexFit 2 Basket – Speaker

This allows slight adjustment of the speaker when mounted.”>The slot mounted frame pattern allows for variable adjustments to the mounting position, especially for Euro-Fit installations.

Specifications

Nominal Impedance (Ohms)

4-Ohm

Speaker Type

2-Way Coax

Power Handling (RMS)

75 Watts RMS
150 Watts Max

Tweeter Mounting Depth

n/a

Shipping Weight

Sensitivity
(dB @ 1W/1M)

88

Grille/Trim Ring Included

Yes

Crossover

Built-in tweeter crossover
High-Pass (HP): 12dB/octave Butterworth

Midrange Mounting Depth

2.52″
(64mm)

Mounting Hardware

Yes

Midrange Size
(Nominal Diameter)

6.5″

Tweeter Size
(Nominal Diameter)

1.0″
(25.4mm)

Frequency Response (Hz)

44Hz – 20kHz

CEA-2031 Compliant

Compatibility

Support

Knowledge Base Articles

  • 2015 Power Full Range Speakers – owner’s manual

Show all Knowledge Base topics

Ask Our Experts

  • Email Us

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

  • View Process
  • Submit Warranty Claim

Return Authorization Process

Diagnose First

Prior to requesting an RA, try to diagnose the failure. Many products we receive are sent back with No Trouble Found, usually due to incorrect installation. Use our RFTECH:Knowledge Base for troubleshooting assistance.

Contact Customer Support

Please call us during normal business hours at 1-800-669-9899 (option #1) and be prepared with the following information:

  • First and Last Name with complete Shipping Address
  • Product Name (T0D415)
  • Serial Number (12 or 13 digit number)
  • Failure Diagnosis (no output, no power LED, etc.)
  • Scanned copy of Original Receipt emailed to [email protected] (dealer name, purchase date, and item purchased must be legible)
  • Credit/Debit Card (if paying for out-of-warranty claims)
  • No money orders or checks.
Shipping Instructions

When shipping your product, your package MUST have the following information:

  • RA# Printed Outside of Box (as large as possible)
  • Copy of Original Receipt
Shipping Address

Ship your product (UPS or FedEx preferred) to the following:

Rockford/ AJR International
300 Regency DR
Glendale Heights, IL 60139
RA#:_______________________

Accessories

16 AWG Speaker Wire Packaged 30 Foot Frosted Black/Silver

RFWP16-30

read more…

Dimensions of car speakers in inches and cm, popular standard sizes

When choosing a speaker system, you may encounter the fact that a device from the same series has a different design and dimensions. Which system to choose, and what selection criteria should be followed? What is more important: the size of autoacoustics or its design (visual) appearance and compliance with the regular installation site?

Speaker dimensions in inches, centimeters and millimeters

10cm or 4″

It’s quite common to see advertisements for small 10cm (4″) speakers. But what are their characteristics, sound quality and what do they generally look like? This type has very low sound quality, In this regard, when buying a speaker with a diagonal of 10 cm, it is advisable to equip the speaker system with additional bass support.This can be standard mid-bass speakers, which are best installed in front of the cabin.0003

The naturally small speaker is significantly cheaper than other car speakers. But to build high-quality sound in a car, saving is not justified, because buying additional midbass, the total cost of the audio system will be significantly higher than buying full-fledged speakers with a diagonal of 16.5 cm. An ordinary three-component acoustics with a built-in specialized midrange can become an analogue of the “10 cm speaker + midbass” combination. . Such a speaker is compact, easy to install in the rear of the car. Similar in appearance, with the same cost, and even from the same series, they can radically differ in the reproduction of mid frequencies. This is due to different electroacoustic characteristics.

Manufacturers often “emphasize” in their marketing pitches a series of improved small speakers that can deliver deep bass. At the same time, other characteristics worsen: a “dry” timbre appears, the tonal balance is disturbed, the clarity of the midbass transmission “suffers”.

The advantage of small speakers is the location of regular places under them (at the corners of the front panel), which is good for sounding. Such an installation guarantees a significant increase in bass output. The reason for this is the close position of the windshield, which increases the bass by 3 dB (similar to doubling the power input) due to the reflective effect. Despite all the “tricks” of the installation, this does not provide full depth of sound.

13 cm or 5.25″

The 13 cm (5.25″) speakers are ideal for front speakers as a rear mic. In case of limited space in the cabin, 13 cm speakers can also be used as front speakers. Installers do not advise resorting to

16 cm or 6.5″

For front-facing speakers, a 16.5 cm (6.5″) speaker is best. This size will give you the opportunity to get good sound quality, bass. In most cases, it fits easily in the car, but there are exceptions when the mounting space is smaller. This problem is easily solved, just contact a specialized installation center. A problem with installation may arise if it is impossible to enlarge the regular place due to the peculiarities of the car interior or the absence of alternative places for installation.

An important feature that is often neglected is the significant differences between models from the same series. First of all, these are models with improved technical characteristics. In this case, as a rule, the price does not differ significantly from the “regular” model. A striking example of such improvements is Hertz acoustics, which improves its models and introduces them to the market with different indices: Hertz DCX 165. 2, Hertz DCX 165.3.

20 cm or 8″

Another type of speaker – enlarged 20 cm (8″). Ideal for three-component car speakers. They play the role of a specialized mid-range link. This is due to their huge size. But just because of the large size of the landing They are difficult to install in the front door of a car.Sometimes they are also installed in two-piece systems.The sound of the midrange frequencies is very mediocre.It is best to use 20 cm drivers in speakers without a subwoofer, which allows you to get good bass.At the moment, practically not used in practice and actually superseded by speakers with improved bass reproduction capabilities with a diameter of 6.5-7 inches.0003

13 x 18 cm or 5 x 7″

13 x 18 cm (5 x 7″) oval speakers can be used to replace the factory speakers when the installation space cannot be modified.

15 x 23 cm or 6 x 9″

Oval speakers in coaxial systems are intended for installation in the rear shelf. Their standard size is 15×23 cm (6×9 inches). Visually, it is much larger than round 6.5 inch ones. This allows you to get a more voluminous bass. The disadvantages of ovals are: poor mechanical balance of the diffuser, the inability to replace the subwoofer, the quality of the coaxial performance. Such a speaker does not make it possible to obtain a full-fledged, high-quality, deep, clear bass and balanced tonal sound.

For those who appreciate the appearance of elliptical speakers, there are models with improved sound quality. The problem is that the choice of such models is quite limited. The best representatives of ovals can be considered Hertz Uno X 690, Focal Access 690 CA1 SG, Alpine S-S69C.

Terminals

Summing up, it should be said that depends on the size of the speaker in direct proportion to the nature of the sound, bass depth and clarity of reproduction . When choosing speakers to build your own speaker system in a car, decide for yourself first of all: what are you willing to sacrifice (money, space in the cabin or the quality of the sound output). Adjusting to the concept of “the main thing is that the suit sits” and, being guided by only the allowable installation space and visual effect without using possible additional options (increasing the installation space, buying additional components), you deprive yourself of an impeccable sound picture.

Thoughtful decisions for you and getting exactly the result from the purchase and installation that you expect!!!

Acoustics for those who do not waste money

Acoustics for those who do not waste money

Overview of acoustic systems Magnum MBS -6.5 C

Good acoustics may be available. This statement completely proves model Magnum MBS-6.5 C. High sensitivity allows these speakers to work great when connected directly to the head unit, and at the same time they are able to surprise with their bass abilities. Let’s consider them in more detail.

The kit, as usual, includes mid-bass speakers, tweeters and crossovers made in separate cases.

The mid-woofer top mounts are made of bright red foamed urethane, giving them a bold and aggressive look.

The Magnum MBS-6.5C comes with protective grills – standard high-quality meshes that allow you to harmoniously fit the bright red elements of the speakers into the strict design of the car interior.

Diffusers are made of cellulose and coated on the front side with a polymer composition that performs a dual function – additional protection against moisture and damping. The latter is the deliverance of the diffuser from its own overtones of the material during the operation of the speaker, caused by mechanical stresses propagating from the center to the edges. They are effectively extinguished by the very layered structure of the material.

On the reverse side, the diffuser has a more familiar “cellulose” texture. The composition of the composite includes additives that give it moisture-proof properties, which is especially important when installing speakers in the door.

The magnet system is quite large by the standards of 6.5-inch speakers, but the speaker’s mounting depth of 69 mm allows you to easily install the Magnum MBS-6.5C in almost any car.

The 1″ voice coil is a popular solution for loudspeakers. High sensitivity allows you to connect acoustics to the built-in amplifier of the radio, but all its capabilities are revealed when connected to a full-fledged car amplifier – the sound will be more powerful, but at the same time light, clear and detailed.

The Magnum MBS-6.5C uses silk dome tweeters with a diameter of 20 mm. An aperture body is located under the fixed grid in each tweeter. It serves to expand the radiation pattern – improves the sound at high frequencies when the tweeters are set at an angle to the listeners.

Tweeters are designed to fine-tune direction after installation. There can be several options for the installation itself – the kit includes mounting elements for mortise installation and for installation on a plane.

Crossovers are compact and can be placed almost anywhere. For example, under the dashboard (if the tweeters will be installed on the panel or in the racks) or in the doors (if they will be installed in the corners of the mirrors).

To understand the capabilities of the speakers, we first measured their parameters.

Impedance versus frequency for Magnum MBS-6.5C

Red – mid-woofer

Blue – Tweeter

Green – Loudspeaker Assembly

Measurements

Fs (natural resonant frequency) – 60 Hz

Vas (equivalent volume ) – 12 l

Qms (mechanical quality factor) – 5.39

Qes (electrical quality factor) – 0.85

Qts (full quality factor) – 0.73

Mms (effective mass of the moving system) – 14 g

BL (electromechanical coupling factor) – 5. 4 T m

Re (voice coil DC resistance) – 3.7 ohms

Speakers ideal for door mounting. Sufficiently low resonant frequency and total quality factor slightly above the classical 0.7 allow them to work confidently at the lower end of the range, giving unexpectedly tight and juicy bass. This was confirmed when listening and is clearly seen on the measured frequency response of the mid-bass speaker:

Frequency response of Magnum MBS-6.5C midbass speaker

Red – on axis

Blue – at an angle of 30 degrees

Green – at an angle of 60 degrees

Mi bass speakers installed in doors are usually visible to listeners from significant angles . In this position, a smooth roll-off is provided at the upper end of their frequency operating range, and higher in frequency, they smoothly “pass the baton” to the tweeters.

Frequency response of Magnum MBS-6.5C tweeter connected via crossover

Red – axial

Blue – 30 degrees

Green – 60 degrees

When they are turned, the radiation efficiency drops slightly, which can be additionally used to adjust the sound.

For example, if you install the tweeters so that each of them is directed to the headrest of the adjacent seat or approximately to the center of the opposite side window, then the near one will be visible to the listener at a slightly larger angle, which means it will be heard a little quieter than the far one. Thus, it will be possible to create an optimal volume balance for both the driver and the passenger at the same time. This will be able to form not just a high, but also a relatively uniform sound stage – when the sound will not be “tied” to the near speakers, but will be formed in the space between the left and right speakers.

Conclusions

At a very low price, the Magnum MBS-6.5C allows you to get a very interesting sound in the car – with rich vocals, clear sounds of instruments and, which is also important, unexpectedly rich and weighty bass. It is quite possible that with these acoustics you will save on a subwoofer, and if you want more bass, then you will not be limited in any way when choosing a suitable model.

6.5 speakers: The Best 6.5-Inch Speakers for 2023

The Best 6.5-Inch Speakers for 2023

If you spend lots of time in your car, a good set of speakers is a worthwhile investment. A great-sounding car stereo system makes a long commute, or a drive across the country, a more enjoyable experience. 

The best place to start is by replacing your stock speakers. Most standard car speakers are about 6.5 inches in diameter, so finding a good set of speakers in that size range means you can install a replacement set with minimal modifications. There are lots of choices in this size to fit every need or budget. Additionally, some of these speakers are good options if you’re looking to upgrade the sound on your boat or motorcycle. 

In this review, we’ll cover the best 6.5-inch speakers, including our recommendations for best value, best sound quality, and other categories. 

Best Overall: Rockford Fosgate R165X3
Best for Sound Quality: Hertz HCX 165
Best Value: JBL CLUB6520
Best Factory-Replacement: Infinity REF6522IX
Best All-Weather: Polk DB652
Best for Bass: Alpine R-Series R-S65

How We Picked the Best 6. 5 Speakers

One of my first cars was a 1982 Toyota Celica with a factory OEM seven-band equalizer and blown speakers. Upgrading to four new Polk 6.5-inch speakers improved the sound quality dramatically. Since then I’ve always believed a good set of speakers is the best way to upgrade your car’s sound quality. 

To compile this list, I looked at 10 to 15 brands of 6.5-inch speakers and reviewed them based on sound quality, build quality, power, and price. I also looked at speakers that provided a good upgrade over the factory OEM speakers and sounded good with or without added amplification. Whether you just want to upgrade the sound in your factory stereo or plan to upgrade it in the future, it’s always better to go with the best 6.5-inch speakers that can handle either. 

You’re not going to get a lot of bass out of a 6.5-inch speaker, so it’s better to look for clarity in the mid- and high-frequency ranges. If you want low-end bass, the best solution is to add a subwoofer and avoid overpowering your 6. 5-inch speakers. 

Finally, price is always a consideration, and there are always trade-offs. But upgrading your 6.5-inch speakers is one of the most cost-effective ways of upgrading the sound of your car stereo. And you can’t go wrong with any of these picks. 

The Best 6.5 Speakers: Reviews and Recommendations

Best Overall: Rockford Fosgate R165X3

All-Around Winner. Rockford Fosgate

Why They Made The Cut: The Rockford Fosgate R165X3 speakers combine great sound quality for factory and aftermarket stereos at a great price, which makes it the top pick.

Specs:
Type: Three-way coaxial
Frequency Response: 52Hz (hertz)–20kHz
Power: 45 watts RMS / 90 watts peak

Pros:
— Great sound across all frequencies
— Ideal for factory and aftermarket stereos
— Easy to install
— Durable and well-built 

Cons:
— May require an amplifier for best sound quality 

The Rockford Fosgate R165X3 speakers are the top choice if you’re looking for a great set of speakers for a wide variety of factory and aftermarket applications. The three-way coaxial stereo speakers can handle 45 watts of RMS power or 90 watts of peak power. They provide great quality sound, are well-built, and are easy to install. 

Each speaker has a tiny half-inch silk dome piezoelectric tweeter, providing responsive high-frequency audio. The three-way coaxial configuration offers a better range and more natural sound quality. 

The only downside is these speakers might not provide the best sound quality when paired with a low-powered factory head unit. To get the best sound, you’ll want a head unit or amplifier that provides close to the 45-watt power rating of these speakers. 

There are better-quality speakers out there that cost more money, but the Rockford Fosgate R165X3 speakers provide the best combination of sound quality, durability, and price. 

Best for Sound Quality: Hertz HCX 165

Strong Sound. HERTZ

Why They Made The Cut: For the best 6.5-inch speakers with amazing sound quality, choose the Hertz HCX 165.  

Specs:
Type: Three-way coaxial
Frequency Response: 50Hz–22kHz
Power: 100 watts RMS / 200 watts peak

Pros:
— Crisp sound across all frequencies
— Clear, strong sound for low frequencies
— Bright, clear sound for high frequencies
— Tweeters can be turned and adjusted 

Cons:
— Expensive
— Do not come with grilles or covers

Hertz offers some of the best-quality speakers you can buy, and the HCX165 speakers are no exception. They provide amazingly clear, high-quality sound thanks to their oversize magnets and pure copper voice coils. The cones are well-engineered to provide exceptional, long-lasting performance. 

The HCX165 speakers handle an impressive 100 watts RMS and 200 watts of peak power to generate loud, clear sound. The tweeters feature a rotary function that allows you to adjust their direction, customizing the sound to your preferences. 

Price is the only major drawback, but in this case, you get what you pay for. The only other concern I have is the lack of a grille or speaker cover for protection. You can fit these speakers behind a factory speaker cover or find an aftermarket one, but that hides the cool rotating-tweeter function. 

You can spend less money and get speakers that are almost as good, but when it comes to high-powered, high-fidelity audio, nothing else sounds as good in a 6.5-inch package.

Best Value: JBL CLUB6520 

Excellent Value. JBL

Why They Made The Cut: The JBL CLUB6520 speakers offer the best combination of low price and good sound quality. 

Specs:
Type: Two-way coaxial
Frequency Response: 50Hz–20kHz
Power: 50 watts RMS / 150 watts peak

Pros:
— Good sound quality
— Great price
— Easy to install 

Cons:
— Lacks low-end bass response
— Mounting hardware isn’t the best quality 

The JBL CLUB6520 speakers are a great value option. They provide better sound quality than factory speakers and are easy to install. These durable two-way coaxial speakers are made with UV-resistant polypropylene and will handle years of use. The 50 watts of RMS power and 150 watts of peak power allow them to provide clear treble and midrange sound at high volumes. 

The only drawbacks are due to the low price. The two-way coaxial speakers lack a low-end bass response, which can be resolved by adding a subwoofer. There have also been complaints about the quality of the mounting hardware, especially the screws. 

But if you’re looking for improved sound quality for a reasonable price, the JBL CLUB6520 speakers are a great choice. 

Best Factory-Replacement: Infinity REF6522IX

Well-Built. Infinity

Why It Made The Cut: If you’re looking to upgrade your factory speakers, the Infinity REF6522IX speakers are the top pick. 

Specs:
Type: Two-way coaxial
Frequency Response: 53Hz–21kHz
Power: 60 watts RMS / 180 watts peak

Pros:
— Great-sounding speakers with excellent mid- and high range
— Excellent build quality
— Universal mounting brackets
— Sound great with a factory OEM head unit and no additional amp

Cons:
— Short wiring connectors
— Lacks low-end bass response 

If you’re looking to replace your factory OEM speakers, the Infinity REF-6522IX speakers are a great option. The full-range coaxial drivers include oversize woofer cones that deliver high bass output. One-inch dome tweeters provide clear highs and include an adjustable tweeter output level. The speakers offer 60 watts RMS and 180 watts peak and provide loud, clear midrange sound when connected to a factory head unit or amplifier. 

The only drawback is a lack of low-end bass response, especially when using these speakers with unamplified factory OEM head units. Additionally, the wiring connectors are short, making it difficult to hook the speakers up. However, the speakers do come with two different mounting brackets, making them easy to install.  

Drawbacks aside, the Infinity REF-6522IX speakers are one of the best ways to upgrade the sound of your factory head unit with or without added amplification.

Best All-Weather: Polk DB652

Loud and Clear. Polk Audio

Why It Made The Cut: The Polk DB652 speakers provide great sound and are built to handle all weather conditions.  

Specs:
Type: Two-way coaxial
Frequency Response: 40Hz–22kHz
Power: 100 watts RMS / 300 watts peak

Pros:
— Marine-rated waterproof
— Well-built to handle all weather
— Clear and loud, with great sound quality

Cons:
— Lacks low-end bass response 

If you need an all-weather speaker for your motorcycle, ATV, boat, or other watercraft, the Polk DB652 speakers are a dependable option. Marine certified, these speakers are made to withstand the toughest weather conditions. 

They sound great as well. With a frequency response of 40 hertz to 22 kilohertz, these speakers are loud and clear with a clean sound across a wide frequency spectrum. With 150 watts RMS power and 300 watts peak power, they also complement amplified systems and subwoofers. 

Like most two-way coaxial speakers, the Polk DB652 speakers lack low-end bass response. But if you want the best speakers for the elements, look no further.

Best for Bass: Alpine R-Series R-S65

Power Player. Alpine

Why It Made The Cut: Alpine’s R-Series R-S65 speakers provide the best low-end bass with great overall sound quality for 6.5-inch speakers. 

Specs:
Type: Two-way coaxial
Frequency Response: 65Hz–29kHz
Power: 100 watts RMS / 300 watts peak

Pros:
— Great bass sound
— Excellent overall sound quality
— Work great with amplified stereo systems

Cons:
— On the expensive side

Most speakers on this list lack good low-end bass response — but not the Alpine R-Series. They provide premium sound quality with excellent low-end bass response. 

They are also a good choice for amplified systems. With 100 watts of RMS power and 300 watts of peak power, they can handle lots of power. One-inch tweeters provide clear highs, while the woofers and rubber surrounds deliver bass with minimal distortion. 

The price is on the expensive side, as there are lower-priced options that deliver as good or better high- and mid-range sound. But if you want bass from a 6.5-inch speaker, this is where it’s at. 

Things to Consider Before Buying The Best 6.5-Inch Speakers

Choosing the best set of 6.5-inch speakers starts with your budget, as well as the following three things: 

Power 

Measured in watts, power determines volume. But there’s more to it than just picking out the most powerful speakers. In addition to evaluating root mean square (RMS) vs. peak power for the speakers, you’ll need to consider how much power your stereo cranks out. 

If you’re building a new stereo system with amplifiers and subwoofers, it makes sense to go with the best quality, most powerful speakers you can afford. However, if you’re keeping your factory head unit, you’ll want to buy speakers that are matched to your existing stereo’s output. 

Sound Quality

Sound quality is subjective and different for everybody, and a lot of it comes down to personal preference. That said, sound quality also depends on the type of speaker and how it handles different ranges of sound frequency.  

Coaxial speakers are full-range speakers that combine the speaker with a woofer and tweeter in one design. Most 6.5-inch speakers are either two-way speakers, meaning they have a woofer and tweeter, or three-way speakers with a separate woofer, tweeter, and midrange component. These types of speakers are the most common. They offer good midrange sound and are easier to install. 

Component speakers separate out the woofers and tweeters from the midrange speaker, providing better high- and low-range sound than coaxial speakers. These types of speakers have better sound quality but are more expensive and harder to install. 

Durability

Build quality and durability determine not only the sound quality but how long your speakers will provide good-quality sound. Door-mounted speakers live a hard life, getting rattled every time you shut the door and exposed to extreme temperatures. So while it’s tempting to get cheaper speakers, you may save money in the long run by buying more durable speakers, which last longer.  

Related: Best Speaker Wires

FAQs

Q: How do I get more bass out of my 6.5 speakers?

The best way to add bass is with a subwoofer, or to upgrade your speakers. However, if you’re looking for more bass from your 6.5-inch speakers alone, you can do the following:

— Adjust your stereo’s equalizer to provide more low-end sound
— Add sound deadening around the speaker
— Isolate the speaker with a rubber gasket

Q: Are 6 and 6.5 speakers the same? 

The only difference is size — the 6 speakers are six inches in diameter, and the 6.5 speakers are 6.5 inches in diameter. Both sizes are comparable in sound, but one size may be a better fit for your vehicle. 

Q: What size speakers are best?

The best size depends on how large of a speaker you can fit. The most popular are 6.5-inch and 6×9-inch speakers. They provide good sound, high- and midrange sound quality, and even some decent bass. Typically 6.5-inch speakers are the best option for door installation, and 6×9-inch speakers are a good option for the back seat. 

Q: Can you make cheap speakers sound better? 

There are a few things you can do to improve the sound quality of cheap speakers:

— Select a prime location: good placement improves sound quality
— Add an equalizer or inline capacitor to reduce the frequency spectrum that sounds bad
— Add an amplifier that matches your speakers’ RMS output

Q: What should the midrange be set to in a car? 

It depends on what you’re listening to and your preference. Most people think music sounds better with the midrange set to 0 and the bass and treble set to +4 and +5. 

Q: How big of a hole do I need for a 6.5 speaker? 

Most 6.5-inch round speakers have a 5-inch hole opening. If you are installing new 6.5-inch speakers to replace old 6.5-inch speakers, they should fit the same hole. If you need to cut a hole to install new speakers, you’ll want to use a 5-inch hole saw.  

Q: What are 6.5 speakers good for? 

These speakers provide good high- and midrange sound. They fit most car doors and are an ideal complement to 6×9-inch speakers or a subwoofer. 

Final Thoughts on the Best 6.5 Speakers

Best Overall: Rockford Fosgate R165X3
Best for Sound Quality: Hertz HCX 165
Best Value: JBL CLUB6520
Best Factory-Replacement: Infinity REF6522IX
Best All-Weather: Polk DB652
Best for Bass: Alpine R-Series R-S65

The Rockford Fosgate R165X3 speakers are the best overall pick, offering great sound quality at a reasonable price. For the ultimate sound, the Hertz HCX 165 can’t be beaten. Check out the JBL CLUB6520 or Infinity REF6522IX if you want a great speaker to work with your factory OEM head unit. And if you need something to brave the elements, you can’t go wrong with the Polk DB652. 

Why Trust Us

Let’s get one thing out of the way: Online shopping is hard. Search for any product and you’ll be confronted with dozens (if not hundreds or thousands) of choices. Our mission at Futurism, where we cover the latest technology, is to simplify this experience by researching, testing, and continuing to evaluate products so we only recommend choices that are actually worth your time.

This post was created by a non-news editorial team at Recurrent Media, Futurism’s owner. Futurism may receive a portion of sales on products linked within this post.

Share This Article

FSB216 Formula 6.5 Inch Speaker System

MB Quart Formula 6.5 inch component car speaker system.

$ 125.99

In stock

FSB216 Formula 6.5 Inch Speaker System quantity

Add to wishlist

SKU: 806576228400

Category: Mobile Speakers


Share



Facebook


Twitter

  • Overview

  • Details & Specs

  • Features & Benefits

  • Support

MB Quart Formula 6. 5 inch component car speaker system with aluminum dome tweeters and Butyl rubber surrounds.

Tweeters

Large aluminum dome component tweeters deliver great sound and clear highs with increased reliability.

Cone Material

Lightweight thermal-formed polypropylene cones enable faster midrange response.

Surround / Cone Coupling

Butyl rubber surrounds provide durability and deeper mid-bass impact. The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather.

Gasket

A textured ABS gasket assures a rigid linear seal to the mounting surface.

​Voice Coil / Former Assembly

Pure Copper voice coil creates a strong magnetic field with a very thin extrusion. Kapton voice coil former is lightweight and efficiently dissipates heat.

Spider

Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process.

Cooling System

Over-coil cooling system allows air exchange over the voice coil through the spider.

External Component Crossover

External Passive Cauer topology Butterworth filter crossover for a smooth transition of frequencies from midrange/midbass to the tweeter element designed into a compact crossover housing that can be easily hidden in the installation.

Frame

Heavy gauge progressive-die stamped steel frames for ultimate rigidity.

Motor

Ferrite magnet motor creates a strong magnetic field while remaining small enough to fit nearly every application.

Connectors

Use spade connectors or solder direct for the best connection. Tinsel Leads: Highly conductive while remaining flexible during high power applications.





All Categories




Powersports UTV Kits



Mobile Speakers



Jeep Wrangler Tuned Systems



Jeep Gladiator Tuned Systems



Marine Speakers



Powersports Speakers



Mobile Amplifiers



Powersports Accessories



Polaris All-in-Ones & Audio Systems



Marine Accessories



Marine Source Units



Powersports Source Units



Marine Amplifiers



RV Source Units



Mobile Subwoofers



Mobile Accessories



International Amplifiers



International Headsets



International Speakers



Polaris Accessories



Powersports Amplifiers



Powersports All-in-Ones



RV Speakers



Polaris Speakers



Marine Vehicle Kits



RV Vehicle Kits



Uncategorized



International Subwoofers



Polaris Subwoofers



Polaris Source Units



Marine All-in-Ones



Polaris Amplifiers



Marine Subwoofers



Bobcat



Mobile



Powersports



OEM



Marine



RV



Mobile Vehicle Kits



International



Polaris





View more









Dimensions of car speakers in inches and cm, popular standard sizes

When choosing a speaker system, you may encounter the fact that a device from the same series has a different design and dimensions. Which system to choose, and what selection criteria should be followed? What is more important: the size of autoacoustics or its design (visual) appearance and compliance with the regular installation site?

Speaker dimensions in inches, centimeters and millimeters

10cm or 4″

It’s quite common to see advertisements for small 10cm (4″) speakers. But what are their characteristics, sound quality and what do they generally look like? This type has very low sound quality, In this regard, when buying a speaker with a diagonal of 10 cm, it is advisable to equip the speaker system with additional bass support.This can be standard mid-bass speakers, which are best installed in front of the cabin.0003

The naturally small speaker is significantly cheaper than other car speakers. But to build high-quality sound in a car, saving is not justified, because buying additional midbass, the total cost of the audio system will be significantly higher than buying full-fledged speakers with a diagonal of 16. 5 cm. An ordinary three-component acoustics with a built-in specialized midrange can become an analogue of the “10 cm speaker + midbass” combination. . Such a speaker is compact, easy to install in the rear of the car. Similar in appearance, with the same cost, and even from the same series, they can radically differ in the reproduction of mid frequencies. This is due to different electroacoustic characteristics.

Manufacturers often “emphasize” in their marketing pitches a series of improved small speakers that can deliver deep bass. At the same time, other characteristics worsen: a “dry” timbre appears, the tonal balance is disturbed, the clarity of the midbass transmission “suffers”.

The advantage of small speakers is the location of regular places under them (at the corners of the front panel), which is good for sounding. Such an installation guarantees a significant increase in bass output. The reason for this is the close position of the windshield, which increases the bass by 3 dB (similar to doubling the power input) due to the reflective effect. Despite all the “tricks” of the installation, this does not provide full depth of sound.

13 cm or 5.25″

The 13 cm (5.25″) speakers are ideal for front speakers as a rear mic. In case of limited space in the cabin, 13 cm speakers can also be used as front speakers. Installers do not advise resorting to

16 cm or 6.5″

For front-facing speakers, a 16.5 cm (6.5″) speaker is best. This size will give you the opportunity to get good sound quality, bass. In most cases, it fits easily in the car, but there are exceptions when the mounting space is smaller. This problem is easily solved, just contact a specialized installation center. A problem with installation may arise if it is impossible to enlarge the regular place due to the peculiarities of the car interior or the absence of alternative places for installation.

An important feature that is often neglected is the significant differences between models from the same series. First of all, these are models with improved technical characteristics. In this case, as a rule, the price does not differ significantly from the “regular” model. A striking example of such improvements is Hertz acoustics, which improves its models and introduces them to the market with different indices: Hertz DCX 165.2, Hertz DCX 165.3.

20 cm or 8″

Another type of speaker – enlarged 20 cm (8″). Ideal for three-component car speakers. They play the role of a specialized mid-range link. This is due to their huge size. But just because of the large size of the landing They are difficult to install in the front door of a car.Sometimes they are also installed in two-piece systems.The sound of the midrange frequencies is very mediocre.It is best to use 20 cm drivers in speakers without a subwoofer, which allows you to get good bass.At the moment, practically not used in practice and actually superseded by speakers with improved bass reproduction capabilities with a diameter of 6.5-7 inches.0003

13 x 18 cm or 5 x 7″

13 x 18 cm (5 x 7″) oval speakers can be used to replace the factory speakers when the installation space cannot be modified.

15 x 23 cm or 6 x 9″

Oval speakers in coaxial systems are intended for installation in the rear shelf. Their standard size is 15×23 cm (6×9 inches). Visually, it is much larger than round 6.5 inch ones. This allows you to get a more voluminous bass. The disadvantages of ovals are: poor mechanical balance of the diffuser, the inability to replace the subwoofer, the quality of the coaxial performance. Such a speaker does not make it possible to obtain a full-fledged, high-quality, deep, clear bass and balanced tonal sound.

For those who appreciate the appearance of elliptical speakers, there are models with improved sound quality. The problem is that the choice of such models is quite limited. The best representatives of ovals can be considered Hertz Uno X 690, Focal Access 690 CA1 SG, Alpine S-S69C.

Terminals

Summing up, it should be said that depends on the size of the speaker in direct proportion to the nature of the sound, bass depth and clarity of reproduction . When choosing speakers to build your own speaker system in a car, decide for yourself first of all: what are you willing to sacrifice (money, space in the cabin or the quality of the sound output). Adjusting to the concept of “the main thing is that the suit sits” and, being guided by only the allowable installation space and visual effect without using possible additional options (increasing the installation space, buying additional components), you deprive yourself of an impeccable sound picture.

Thoughtful decisions for you and getting exactly the result from the purchase and installation that you expect!!!

Acoustics for those who do not waste money

Acoustics for those who do not waste money

Overview of acoustic systems Magnum MBS -6.5 C

Good acoustics may be available. This statement completely proves model Magnum MBS-6. 5 C. High sensitivity allows these speakers to work great when connected directly to the head unit, and at the same time they are able to surprise with their bass abilities. Let’s consider them in more detail.

The kit, as usual, includes mid-bass speakers, tweeters and crossovers made in separate cases.

The mid-woofer top mounts are made of bright red foamed urethane, giving them a bold and aggressive look.

The Magnum MBS-6.5C comes with protective grills – standard high-quality meshes that allow you to harmoniously fit the bright red elements of the speakers into the strict design of the car interior.

Diffusers are made of cellulose and coated on the front side with a polymer composition that performs a dual function – additional protection against moisture and damping. The latter is the deliverance of the diffuser from its own overtones of the material during the operation of the speaker, caused by mechanical stresses propagating from the center to the edges. They are effectively extinguished by the very layered structure of the material.

On the reverse side, the diffuser has a more familiar “cellulose” texture. The composition of the composite includes additives that give it moisture-proof properties, which is especially important when installing speakers in the door.

The magnet system is quite large by the standards of 6.5-inch speakers, but the speaker’s mounting depth of 69 mm allows you to easily install the Magnum MBS-6.5C in almost any car.

The 1″ voice coil is a popular solution for loudspeakers. High sensitivity allows you to connect acoustics to the built-in amplifier of the radio, but all its capabilities are revealed when connected to a full-fledged car amplifier – the sound will be more powerful, but at the same time light, clear and detailed.

The Magnum MBS-6.5C uses silk dome tweeters with a diameter of 20 mm. An aperture body is located under the fixed grid in each tweeter. It serves to expand the radiation pattern – improves the sound at high frequencies when the tweeters are set at an angle to the listeners.

Tweeters are designed to fine-tune direction after installation. There can be several options for the installation itself – the kit includes mounting elements for mortise installation and for installation on a plane.

Crossovers are compact and can be placed almost anywhere. For example, under the dashboard (if the tweeters will be installed on the panel or in the racks) or in the doors (if they will be installed in the corners of the mirrors).

To understand the capabilities of the speakers, we first measured their parameters.

Impedance versus frequency for Magnum MBS-6.5C

Red – mid-woofer

Blue – Tweeter

Green – Loudspeaker Assembly

Measurements

Fs (natural resonant frequency) – 60 Hz

Vas (equivalent volume ) – 12 l

Qms (mechanical quality factor) – 5. 39

Qes (electrical quality factor) – 0.85

Qts (full quality factor) – 0.73

Mms (effective mass of the moving system) – 14 g

BL (electromechanical coupling factor) – 5.4 T m

Re (voice coil DC resistance) – 3.7 ohms

Speakers ideal for door mounting. Sufficiently low resonant frequency and total quality factor slightly above the classical 0.7 allow them to work confidently at the lower end of the range, giving unexpectedly tight and juicy bass. This was confirmed when listening and is clearly seen on the measured frequency response of the mid-bass speaker:

Frequency response of Magnum MBS-6.5C midbass speaker

Red – on axis

Blue – at an angle of 30 degrees

Green – at an angle of 60 degrees

Mi bass speakers installed in doors are usually visible to listeners from significant angles . In this position, a smooth roll-off is provided at the upper end of their frequency operating range, and higher in frequency, they smoothly “pass the baton” to the tweeters.

Frequency response of Magnum MBS-6.5C tweeter connected via crossover

Red – axial

Blue – 30 degrees

Green – 60 degrees

When they are turned, the radiation efficiency drops slightly, which can be additionally used to adjust the sound.

For example, if you install the tweeters so that each of them is directed to the headrest of the adjacent seat or approximately to the center of the opposite side window, then the near one will be visible to the listener at a slightly larger angle, which means it will be heard a little quieter than the far one. Thus, it will be possible to create an optimal volume balance for both the driver and the passenger at the same time. This will be able to form not just a high, but also a relatively uniform sound stage – when the sound will not be “tied” to the near speakers, but will be formed in the space between the left and right speakers.

Conclusions

At a very low price, the Magnum MBS-6. 5C allows you to get a very interesting sound in the car – with rich vocals, clear sounds of instruments and, which is also important, unexpectedly rich and weighty bass. It is quite possible that with these acoustics you will save on a subwoofer, and if you want more bass, then you will not be limited in any way when choosing a suitable model.

In order to realize the bass potential of the Magnum MBS-6.5C, we recommend that you do not be lazy and treat the doors with vibration-damping materials and take care of the mid-bass speakers being firmly and securely fastened.

To achieve surround sound with a high and even soundstage, pay special attention to the placement and direction of the tweeters. Before finally attaching them, try different options – in each car the best option will be different. Try to find a compromise – so that the upper frequencies do not lose their lightness and airiness, but at the same time the sound would not be “attached” to the near tweeter, but would be evenly distributed in the space between the left and right sides.

6.5 speakers: The Best 6.5-Inch Speakers for 2023

The Best 6.5-Inch Speakers for 2023

If you spend lots of time in your car, a good set of speakers is a worthwhile investment. A great-sounding car stereo system makes a long commute, or a drive across the country, a more enjoyable experience. 

The best place to start is by replacing your stock speakers. Most standard car speakers are about 6.5 inches in diameter, so finding a good set of speakers in that size range means you can install a replacement set with minimal modifications. There are lots of choices in this size to fit every need or budget. Additionally, some of these speakers are good options if you’re looking to upgrade the sound on your boat or motorcycle. 

In this review, we’ll cover the best 6.5-inch speakers, including our recommendations for best value, best sound quality, and other categories. 

Best Overall: Rockford Fosgate R165X3
Best for Sound Quality: Hertz HCX 165
Best Value: JBL CLUB6520
Best Factory-Replacement: Infinity REF6522IX
Best All-Weather: Polk DB652
Best for Bass: Alpine R-Series R-S65

How We Picked the Best 6. 5 Speakers

One of my first cars was a 1982 Toyota Celica with a factory OEM seven-band equalizer and blown speakers. Upgrading to four new Polk 6.5-inch speakers improved the sound quality dramatically. Since then I’ve always believed a good set of speakers is the best way to upgrade your car’s sound quality. 

To compile this list, I looked at 10 to 15 brands of 6.5-inch speakers and reviewed them based on sound quality, build quality, power, and price. I also looked at speakers that provided a good upgrade over the factory OEM speakers and sounded good with or without added amplification. Whether you just want to upgrade the sound in your factory stereo or plan to upgrade it in the future, it’s always better to go with the best 6.5-inch speakers that can handle either. 

You’re not going to get a lot of bass out of a 6.5-inch speaker, so it’s better to look for clarity in the mid- and high-frequency ranges. If you want low-end bass, the best solution is to add a subwoofer and avoid overpowering your 6. 5-inch speakers. 

Finally, price is always a consideration, and there are always trade-offs. But upgrading your 6.5-inch speakers is one of the most cost-effective ways of upgrading the sound of your car stereo. And you can’t go wrong with any of these picks. 

The Best 6.5 Speakers: Reviews and Recommendations

Best Overall: Rockford Fosgate R165X3

All-Around Winner. Rockford Fosgate

Why They Made The Cut: The Rockford Fosgate R165X3 speakers combine great sound quality for factory and aftermarket stereos at a great price, which makes it the top pick.

Specs:
Type: Three-way coaxial
Frequency Response: 52Hz (hertz)–20kHz
Power: 45 watts RMS / 90 watts peak

Pros:
— Great sound across all frequencies
— Ideal for factory and aftermarket stereos
— Easy to install
— Durable and well-built 

Cons:
— May require an amplifier for best sound quality 

The Rockford Fosgate R165X3 speakers are the top choice if you’re looking for a great set of speakers for a wide variety of factory and aftermarket applications. The three-way coaxial stereo speakers can handle 45 watts of RMS power or 90 watts of peak power. They provide great quality sound, are well-built, and are easy to install. 

Each speaker has a tiny half-inch silk dome piezoelectric tweeter, providing responsive high-frequency audio. The three-way coaxial configuration offers a better range and more natural sound quality. 

The only downside is these speakers might not provide the best sound quality when paired with a low-powered factory head unit. To get the best sound, you’ll want a head unit or amplifier that provides close to the 45-watt power rating of these speakers. 

There are better-quality speakers out there that cost more money, but the Rockford Fosgate R165X3 speakers provide the best combination of sound quality, durability, and price. 

Best for Sound Quality: Hertz HCX 165

Strong Sound. HERTZ

Why They Made The Cut: For the best 6.5-inch speakers with amazing sound quality, choose the Hertz HCX 165.  

Specs:
Type: Three-way coaxial
Frequency Response: 50Hz–22kHz
Power: 100 watts RMS / 200 watts peak

Pros:
— Crisp sound across all frequencies
— Clear, strong sound for low frequencies
— Bright, clear sound for high frequencies
— Tweeters can be turned and adjusted 

Cons:
— Expensive
— Do not come with grilles or covers

Hertz offers some of the best-quality speakers you can buy, and the HCX165 speakers are no exception. They provide amazingly clear, high-quality sound thanks to their oversize magnets and pure copper voice coils. The cones are well-engineered to provide exceptional, long-lasting performance. 

The HCX165 speakers handle an impressive 100 watts RMS and 200 watts of peak power to generate loud, clear sound. The tweeters feature a rotary function that allows you to adjust their direction, customizing the sound to your preferences. 

Price is the only major drawback, but in this case, you get what you pay for. The only other concern I have is the lack of a grille or speaker cover for protection. You can fit these speakers behind a factory speaker cover or find an aftermarket one, but that hides the cool rotating-tweeter function. 

You can spend less money and get speakers that are almost as good, but when it comes to high-powered, high-fidelity audio, nothing else sounds as good in a 6.5-inch package.

Best Value: JBL CLUB6520 

Excellent Value. JBL

Why They Made The Cut: The JBL CLUB6520 speakers offer the best combination of low price and good sound quality. 

Specs:
Type: Two-way coaxial
Frequency Response: 50Hz–20kHz
Power: 50 watts RMS / 150 watts peak

Pros:
— Good sound quality
— Great price
— Easy to install 

Cons:
— Lacks low-end bass response
— Mounting hardware isn’t the best quality 

The JBL CLUB6520 speakers are a great value option. They provide better sound quality than factory speakers and are easy to install. These durable two-way coaxial speakers are made with UV-resistant polypropylene and will handle years of use. The 50 watts of RMS power and 150 watts of peak power allow them to provide clear treble and midrange sound at high volumes. 

The only drawbacks are due to the low price. The two-way coaxial speakers lack a low-end bass response, which can be resolved by adding a subwoofer. There have also been complaints about the quality of the mounting hardware, especially the screws. 

But if you’re looking for improved sound quality for a reasonable price, the JBL CLUB6520 speakers are a great choice. 

Best Factory-Replacement: Infinity REF6522IX

Well-Built. Infinity

Why It Made The Cut: If you’re looking to upgrade your factory speakers, the Infinity REF6522IX speakers are the top pick. 

Specs:
Type: Two-way coaxial
Frequency Response: 53Hz–21kHz
Power: 60 watts RMS / 180 watts peak

Pros:
— Great-sounding speakers with excellent mid- and high range
— Excellent build quality
— Universal mounting brackets
— Sound great with a factory OEM head unit and no additional amp

Cons:
— Short wiring connectors
— Lacks low-end bass response 

If you’re looking to replace your factory OEM speakers, the Infinity REF-6522IX speakers are a great option. The full-range coaxial drivers include oversize woofer cones that deliver high bass output. One-inch dome tweeters provide clear highs and include an adjustable tweeter output level. The speakers offer 60 watts RMS and 180 watts peak and provide loud, clear midrange sound when connected to a factory head unit or amplifier. 

The only drawback is a lack of low-end bass response, especially when using these speakers with unamplified factory OEM head units. Additionally, the wiring connectors are short, making it difficult to hook the speakers up. However, the speakers do come with two different mounting brackets, making them easy to install.  

Drawbacks aside, the Infinity REF-6522IX speakers are one of the best ways to upgrade the sound of your factory head unit with or without added amplification.

Best All-Weather: Polk DB652

Loud and Clear. Polk Audio

Why It Made The Cut: The Polk DB652 speakers provide great sound and are built to handle all weather conditions.  

Specs:
Type: Two-way coaxial
Frequency Response: 40Hz–22kHz
Power: 100 watts RMS / 300 watts peak

Pros:
— Marine-rated waterproof
— Well-built to handle all weather
— Clear and loud, with great sound quality

Cons:
— Lacks low-end bass response 

If you need an all-weather speaker for your motorcycle, ATV, boat, or other watercraft, the Polk DB652 speakers are a dependable option. Marine certified, these speakers are made to withstand the toughest weather conditions. 

They sound great as well. With a frequency response of 40 hertz to 22 kilohertz, these speakers are loud and clear with a clean sound across a wide frequency spectrum. With 150 watts RMS power and 300 watts peak power, they also complement amplified systems and subwoofers. 

Like most two-way coaxial speakers, the Polk DB652 speakers lack low-end bass response. But if you want the best speakers for the elements, look no further.

Best for Bass: Alpine R-Series R-S65

Power Player. Alpine

Why It Made The Cut: Alpine’s R-Series R-S65 speakers provide the best low-end bass with great overall sound quality for 6.5-inch speakers. 

Specs:
Type: Two-way coaxial
Frequency Response: 65Hz–29kHz
Power: 100 watts RMS / 300 watts peak

Pros:
— Great bass sound
— Excellent overall sound quality
— Work great with amplified stereo systems

Cons:
— On the expensive side

Most speakers on this list lack good low-end bass response — but not the Alpine R-Series. They provide premium sound quality with excellent low-end bass response. 

They are also a good choice for amplified systems. With 100 watts of RMS power and 300 watts of peak power, they can handle lots of power. One-inch tweeters provide clear highs, while the woofers and rubber surrounds deliver bass with minimal distortion. 

The price is on the expensive side, as there are lower-priced options that deliver as good or better high- and mid-range sound. But if you want bass from a 6.5-inch speaker, this is where it’s at. 

Things to Consider Before Buying The Best 6.5-Inch Speakers

Choosing the best set of 6.5-inch speakers starts with your budget, as well as the following three things: 

Power 

Measured in watts, power determines volume. But there’s more to it than just picking out the most powerful speakers. In addition to evaluating root mean square (RMS) vs. peak power for the speakers, you’ll need to consider how much power your stereo cranks out. 

If you’re building a new stereo system with amplifiers and subwoofers, it makes sense to go with the best quality, most powerful speakers you can afford. However, if you’re keeping your factory head unit, you’ll want to buy speakers that are matched to your existing stereo’s output. 

Sound Quality

Sound quality is subjective and different for everybody, and a lot of it comes down to personal preference. That said, sound quality also depends on the type of speaker and how it handles different ranges of sound frequency.  

Coaxial speakers are full-range speakers that combine the speaker with a woofer and tweeter in one design. Most 6.5-inch speakers are either two-way speakers, meaning they have a woofer and tweeter, or three-way speakers with a separate woofer, tweeter, and midrange component. These types of speakers are the most common. They offer good midrange sound and are easier to install. 

Component speakers separate out the woofers and tweeters from the midrange speaker, providing better high- and low-range sound than coaxial speakers. These types of speakers have better sound quality but are more expensive and harder to install. 

Durability

Build quality and durability determine not only the sound quality but how long your speakers will provide good-quality sound. Door-mounted speakers live a hard life, getting rattled every time you shut the door and exposed to extreme temperatures. So while it’s tempting to get cheaper speakers, you may save money in the long run by buying more durable speakers, which last longer.  

Related: Best Speaker Wires

FAQs

Q: How do I get more bass out of my 6.5 speakers?

The best way to add bass is with a subwoofer, or to upgrade your speakers. However, if you’re looking for more bass from your 6.5-inch speakers alone, you can do the following:

— Adjust your stereo’s equalizer to provide more low-end sound
— Add sound deadening around the speaker
— Isolate the speaker with a rubber gasket

Q: Are 6 and 6.5 speakers the same? 

The only difference is size — the 6 speakers are six inches in diameter, and the 6.5 speakers are 6.5 inches in diameter. Both sizes are comparable in sound, but one size may be a better fit for your vehicle. 

Q: What size speakers are best?

The best size depends on how large of a speaker you can fit. The most popular are 6.5-inch and 6×9-inch speakers. They provide good sound, high- and midrange sound quality, and even some decent bass. Typically 6.5-inch speakers are the best option for door installation, and 6×9-inch speakers are a good option for the back seat. 

Q: Can you make cheap speakers sound better? 

There are a few things you can do to improve the sound quality of cheap speakers:

— Select a prime location: good placement improves sound quality
— Add an equalizer or inline capacitor to reduce the frequency spectrum that sounds bad
— Add an amplifier that matches your speakers’ RMS output

Q: What should the midrange be set to in a car? 

It depends on what you’re listening to and your preference. Most people think music sounds better with the midrange set to 0 and the bass and treble set to +4 and +5. 

Q: How big of a hole do I need for a 6.5 speaker? 

Most 6.5-inch round speakers have a 5-inch hole opening. If you are installing new 6.5-inch speakers to replace old 6.5-inch speakers, they should fit the same hole. If you need to cut a hole to install new speakers, you’ll want to use a 5-inch hole saw.  

Q: What are 6.5 speakers good for? 

These speakers provide good high- and midrange sound. They fit most car doors and are an ideal complement to 6×9-inch speakers or a subwoofer. 

Final Thoughts on the Best 6.5 Speakers

Best Overall: Rockford Fosgate R165X3
Best for Sound Quality: Hertz HCX 165
Best Value: JBL CLUB6520
Best Factory-Replacement: Infinity REF6522IX
Best All-Weather: Polk DB652
Best for Bass: Alpine R-Series R-S65

The Rockford Fosgate R165X3 speakers are the best overall pick, offering great sound quality at a reasonable price. For the ultimate sound, the Hertz HCX 165 can’t be beaten. Check out the JBL CLUB6520 or Infinity REF6522IX if you want a great speaker to work with your factory OEM head unit. And if you need something to brave the elements, you can’t go wrong with the Polk DB652. 

Why Trust Us

Let’s get one thing out of the way: Online shopping is hard. Search for any product and you’ll be confronted with dozens (if not hundreds or thousands) of choices. Our mission at Futurism, where we cover the latest technology, is to simplify this experience by researching, testing, and continuing to evaluate products so we only recommend choices that are actually worth your time.

This post was created by a non-news editorial team at Recurrent Media, Futurism’s owner. Futurism may receive a portion of sales on products linked within this post.

Share This Article

Power 6.5″ 2-Way Euro Fit Full Range Speaker

The Power T1650 is a T1 full-range speaker system with a coaxially mounted tweeter and a true 6.5″ midrange optimized for a wide variety of U.S., European, and import vehicles.

Read More

1 Review

Find Dealer

Not sure what size you need?

FIND MY SPEAKER SIZES

OverviewTechnologiesSpecificationsSupportAccessories

Overview

Get Power series sound quality in a drop-in speaker. These 6.5” 2-way full-range speakers inherent all the coolest features from – their big brother – the T1 component systems. Features include a bridge-mounted tweeter and are optimized for a wide variety of U.S., European, and import vehicles. Be prepared, these are more than OEM replacement speakers, their sound quality has been perfected for true Rockford Fosgate fanatics!

FEATURES AT A GLANCE

  • Injection molded carbon fiber filled polypropylene cone
  • 1″ treated aluminum dome tweeter
  • VAST vertical attach surround technique increases effective radiating cone area up to 25%
  • Santoprene rubber surround
  • High temp aluminum voice coil
  • Linear high excursion matched motor magnetics and suspension design
  • Stamp-cast aluminum frame
  • Fatigue and tear resistant poly cotton spider
  • FlexFit 2 mounting
  • Integrated concealed 12dB/Octave crossover components
  • Grilles and mounting hardware included
  • 1 Year Warranty

Technologies

CEA-2031

This means your speaker has the capacity to handle power under continuous demand, not instantaneous power handling, that over time, can damage voice coils.”>Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.

Learn more

x

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards.

Klippel Verified

“>Klippel is a speaker certification program allowing us to deliver the best possible speakers.

Learn more

x

Klippel Verified

Klippel is a speaker certification program allowing us to deliver the best possible speakers.

ICC Crossover

The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier …

Learn more

x

ICC Crossover

The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier installation.

VAST Surround (speakers)

The Vertical Attach Surround Technique significantly increases a subwoofer’s effective radiating cone area up to 25%.

Learn more

x

VAST Surround (speakers)

This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing), which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved. <br><br>The new patent-pending VAST™ technique is a result of combining a unique design concept with precise manufacturing to provide up to 25% more effective radiating cone area.<br>”>The Vertical Attach Surround Technique significantly increases a subwoofer’s effective radiating cone area up to 25%.

FlexFit 2 Basket – Speaker

The slot mounted frame pattern allows for variable adjustments to the mounting position, especially for Euro-Fit …

Learn more

x

FlexFit 2 Basket – Speaker

This allows slight adjustment of the speaker when mounted.”>The slot mounted frame pattern allows for variable adjustments to the mounting position, especially for Euro-Fit installations.

Specifications

Nominal Impedance (Ohms)

4-Ohm

Speaker Type

2-Way Coax

Power Handling (RMS)

75 Watts RMS
150 Watts Max

Tweeter Mounting Depth

n/a

Shipping Weight

Sensitivity
(dB @ 1W/1M)

88

Grille/Trim Ring Included

Yes

Crossover

Built-in tweeter crossover
High-Pass (HP): 12dB/octave Butterworth

Midrange Mounting Depth

2.52″
(64mm)

Mounting Hardware

Yes

Midrange Size
(Nominal Diameter)

6.5″

Tweeter Size
(Nominal Diameter)

1.0″
(25.4mm)

Frequency Response (Hz)

44Hz – 20kHz

CEA-2031 Compliant

Compatibility

Support

Knowledge Base Articles

  • 2015 Power Full Range Speakers – owner’s manual

Show all Knowledge Base topics

Ask Our Experts

  • Email Us

Return Authorization

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

  • View Process
  • Submit Warranty Claim

Return Authorization Process

Diagnose First

Prior to requesting an RA, try to diagnose the failure. Many products we receive are sent back with No Trouble Found, usually due to incorrect installation. Use our RFTECH:Knowledge Base for troubleshooting assistance.

Contact Customer Support

Please call us during normal business hours at 1-800-669-9899 (option #1) and be prepared with the following information:

  • First and Last Name with complete Shipping Address
  • Product Name (T0D415)
  • Serial Number (12 or 13 digit number)
  • Failure Diagnosis (no output, no power LED, etc.)
  • Scanned copy of Original Receipt emailed to [email protected] (dealer name, purchase date, and item purchased must be legible)
  • Credit/Debit Card (if paying for out-of-warranty claims)
  • No money orders or checks.
Shipping Instructions

When shipping your product, your package MUST have the following information:

  • RA# Printed Outside of Box (as large as possible)
  • Copy of Original Receipt
Shipping Address

Ship your product (UPS or FedEx preferred) to the following:

Rockford/ AJR International
300 Regency DR
Glendale Heights, IL 60139
RA#:_______________________

Accessories

16 AWG Speaker Wire Packaged 30 Foot Frosted Black/Silver

RFWP16-30

read more…

Dimensions of car speakers in inches and cm, popular standard sizes

When choosing a speaker system, you may encounter the fact that a device from the same series has a different design and dimensions. Which system to choose, and what selection criteria should be followed? What is more important: the size of autoacoustics or its design (visual) appearance and compliance with the regular installation site?

Speaker dimensions in inches, centimeters and millimeters

10cm or 4″

It’s quite common to see advertisements for small 10cm (4″) speakers. But what are their characteristics, sound quality and what do they generally look like? This type has very low sound quality, In this regard, when buying a speaker with a diagonal of 10 cm, it is advisable to equip the speaker system with additional bass support.This can be standard mid-bass speakers, which are best installed in front of the cabin.0003

The naturally small speaker is significantly cheaper than other car speakers. But to build high-quality sound in a car, saving is not justified, because buying additional midbass, the total cost of the audio system will be significantly higher than buying full-fledged speakers with a diagonal of 16.5 cm. An ordinary three-component acoustics with a built-in specialized midrange can become an analogue of the “10 cm speaker + midbass” combination. . Such a speaker is compact, easy to install in the rear of the car. Similar in appearance, with the same cost, and even from the same series, they can radically differ in the reproduction of mid frequencies. This is due to different electroacoustic characteristics.

Manufacturers often “emphasize” in their marketing pitches a series of improved small speakers that can deliver deep bass. At the same time, other characteristics worsen: a “dry” timbre appears, the tonal balance is disturbed, the clarity of the midbass transmission “suffers”.

The advantage of small speakers is the location of regular places under them (at the corners of the front panel), which is good for sounding. Such an installation guarantees a significant increase in bass output. The reason for this is the close position of the windshield, which increases the bass by 3 dB (similar to doubling the power input) due to the reflective effect. Despite all the “tricks” of the installation, this does not provide full depth of sound.

13 cm or 5.25″

The 13 cm (5.25″) speakers are ideal for front speakers as a rear mic. In case of limited space in the cabin, 13 cm speakers can also be used as front speakers. Installers do not advise resorting to

16 cm or 6.5″

For front-facing speakers, a 16.5 cm (6.5″) speaker is best. This size will give you the opportunity to get good sound quality, bass. In most cases, it fits easily in the car, but there are exceptions when the mounting space is smaller. This problem is easily solved, just contact a specialized installation center. A problem with installation may arise if it is impossible to enlarge the regular place due to the peculiarities of the car interior or the absence of alternative places for installation.

An important feature that is often neglected is the significant differences between models from the same series. First of all, these are models with improved technical characteristics. In this case, as a rule, the price does not differ significantly from the “regular” model. A striking example of such improvements is Hertz acoustics, which improves its models and introduces them to the market with different indices: Hertz DCX 165. 2, Hertz DCX 165.3.

20 cm or 8″

Another type of speaker – enlarged 20 cm (8″). Ideal for three-component car speakers. They play the role of a specialized mid-range link. This is due to their huge size. But just because of the large size of the landing They are difficult to install in the front door of a car.Sometimes they are also installed in two-piece systems.The sound of the midrange frequencies is very mediocre.It is best to use 20 cm drivers in speakers without a subwoofer, which allows you to get good bass.At the moment, practically not used in practice and actually superseded by speakers with improved bass reproduction capabilities with a diameter of 6.5-7 inches.0003

13 x 18 cm or 5 x 7″

13 x 18 cm (5 x 7″) oval speakers can be used to replace the factory speakers when the installation space cannot be modified.

15 x 23 cm or 6 x 9″

Oval speakers in coaxial systems are intended for installation in the rear shelf. Their standard size is 15×23 cm (6×9 inches). Visually, it is much larger than round 6.5 inch ones. This allows you to get a more voluminous bass. The disadvantages of ovals are: poor mechanical balance of the diffuser, the inability to replace the subwoofer, the quality of the coaxial performance. Such a speaker does not make it possible to obtain a full-fledged, high-quality, deep, clear bass and balanced tonal sound.

For those who appreciate the appearance of elliptical speakers, there are models with improved sound quality. The problem is that the choice of such models is quite limited. The best representatives of ovals can be considered Hertz Uno X 690, Focal Access 690 CA1 SG, Alpine S-S69C.

Terminals

Summing up, it should be said that depends on the size of the speaker in direct proportion to the nature of the sound, bass depth and clarity of reproduction . When choosing speakers to build your own speaker system in a car, decide for yourself first of all: what are you willing to sacrifice (money, space in the cabin or the quality of the sound output). Adjusting to the concept of “the main thing is that the suit sits” and, being guided by only the allowable installation space and visual effect without using possible additional options (increasing the installation space, buying additional components), you deprive yourself of an impeccable sound picture.

Thoughtful decisions for you and getting exactly the result from the purchase and installation that you expect!!!

Acoustics for those who do not waste money

Acoustics for those who do not waste money

Overview of acoustic systems Magnum MBS -6.5 C

Good acoustics may be available. This statement completely proves model Magnum MBS-6.5 C. High sensitivity allows these speakers to work great when connected directly to the head unit, and at the same time they are able to surprise with their bass abilities. Let’s consider them in more detail.

The kit, as usual, includes mid-bass speakers, tweeters and crossovers made in separate cases.

The mid-woofer top mounts are made of bright red foamed urethane, giving them a bold and aggressive look.

The Magnum MBS-6.5C comes with protective grills – standard high-quality meshes that allow you to harmoniously fit the bright red elements of the speakers into the strict design of the car interior.

Diffusers are made of cellulose and coated on the front side with a polymer composition that performs a dual function – additional protection against moisture and damping. The latter is the deliverance of the diffuser from its own overtones of the material during the operation of the speaker, caused by mechanical stresses propagating from the center to the edges. They are effectively extinguished by the very layered structure of the material.

On the reverse side, the diffuser has a more familiar “cellulose” texture. The composition of the composite includes additives that give it moisture-proof properties, which is especially important when installing speakers in the door.

The magnet system is quite large by the standards of 6.5-inch speakers, but the speaker’s mounting depth of 69 mm allows you to easily install the Magnum MBS-6.5C in almost any car.

The 1″ voice coil is a popular solution for loudspeakers. High sensitivity allows you to connect acoustics to the built-in amplifier of the radio, but all its capabilities are revealed when connected to a full-fledged car amplifier – the sound will be more powerful, but at the same time light, clear and detailed.

The Magnum MBS-6.5C uses silk dome tweeters with a diameter of 20 mm. An aperture body is located under the fixed grid in each tweeter. It serves to expand the radiation pattern – improves the sound at high frequencies when the tweeters are set at an angle to the listeners.

Tweeters are designed to fine-tune direction after installation. There can be several options for the installation itself – the kit includes mounting elements for mortise installation and for installation on a plane.

Crossovers are compact and can be placed almost anywhere. For example, under the dashboard (if the tweeters will be installed on the panel or in the racks) or in the doors (if they will be installed in the corners of the mirrors).

To understand the capabilities of the speakers, we first measured their parameters.

Impedance versus frequency for Magnum MBS-6.5C

Red – mid-woofer

Blue – Tweeter

Green – Loudspeaker Assembly

Measurements

Fs (natural resonant frequency) – 60 Hz

Vas (equivalent volume ) – 12 l

Qms (mechanical quality factor) – 5.39

Qes (electrical quality factor) – 0.85

Qts (full quality factor) – 0.73

Mms (effective mass of the moving system) – 14 g

BL (electromechanical coupling factor) – 5. 4 T m

Re (voice coil DC resistance) – 3.7 ohms

Speakers ideal for door mounting. Sufficiently low resonant frequency and total quality factor slightly above the classical 0.7 allow them to work confidently at the lower end of the range, giving unexpectedly tight and juicy bass. This was confirmed when listening and is clearly seen on the measured frequency response of the mid-bass speaker:

Frequency response of Magnum MBS-6.5C midbass speaker

Red – on axis

Blue – at an angle of 30 degrees

Green – at an angle of 60 degrees

Mi bass speakers installed in doors are usually visible to listeners from significant angles . In this position, a smooth roll-off is provided at the upper end of their frequency operating range, and higher in frequency, they smoothly “pass the baton” to the tweeters.

Frequency response of Magnum MBS-6.5C tweeter connected via crossover

Red – axial

Blue – 30 degrees

Green – 60 degrees

When they are turned, the radiation efficiency drops slightly, which can be additionally used to adjust the sound.

For example, if you install the tweeters so that each of them is directed to the headrest of the adjacent seat or approximately to the center of the opposite side window, then the near one will be visible to the listener at a slightly larger angle, which means it will be heard a little quieter than the far one. Thus, it will be possible to create an optimal volume balance for both the driver and the passenger at the same time. This will be able to form not just a high, but also a relatively uniform sound stage – when the sound will not be “tied” to the near speakers, but will be formed in the space between the left and right speakers.

Conclusions

At a very low price, the Magnum MBS-6.5C allows you to get a very interesting sound in the car – with rich vocals, clear sounds of instruments and, which is also important, unexpectedly rich and weighty bass. It is quite possible that with these acoustics you will save on a subwoofer, and if you want more bass, then you will not be limited in any way when choosing a suitable model.

Powered tv speaker: Best powered speakers for 2023

Best powered speakers for 2023

In this article: I’ll provide shopping tips to help you find the best powered stereo speakers for your home or office listening area. And I’ll recommend six of the best powered stereo speaker models I’ve tried…

  1. Best desktop computer speakers — Audioengine HD3
  2. Best value — Kanto YU6
  3. Best powered speakers for TV — Klipsch The Nines
  4. Best bass — KEF LS50 Wireless II
  5. Best powered speakers for audiophiles — Sony Signature Series SA-Z1
  6. Best powered speakers for turntable users — Q Acoustics Q Active 200 System

… with a budget-friendly alternative to each pick.

I love powered stereo speakers. They’re basically bookshelf speakers with one or more amplifiers built in (also known as active speakers). They don’t need to run through a receiver or integrated amp, which is nice in a smaller space.

I’ve used a pair of Klipsch powered speakers at home for a while now. They give me everything I need to play music from my chosen sources — wired connections for my TV, gaming system, and turntable, plus Bluetooth for music streaming. And they sound excellent, which is really the most important thing!

The Klipsch speakers suit my situation best, but there are plenty of other models that fulfill different needs. This guide will give you an idea of what to look for when shopping for the best active speakers for your home. Then I’ll make some recommendations based on my hands-on (or is it ears-on?) experience with various models.

You can plug your computer or another music source directly into a set of powered speakers. It’s a simple, space-saving alternative to a traditional home audio component system.

How to choose the best powered speakers

Knowing which features you want will help narrow down your choices. Ask yourself the following questions as you browse.

What sources will you be using?

Most powered speakers feature Bluetooth, and many also offer built-in Wi-Fi for music streaming. Beyond that, the most important thing to confirm is that there are enough inputs for the wired connections you want to make. Consider the following situations you may encounter:

  • optical digital inputs are useful for connecting digital components like a CD player, or the optical output of your TV
  • If you want to directly connect a turntable, look for powered speakers with a phono input and built-in phono preamp
  • A USB or Ethernet connection is great for playing high-resolution music files stored on your computer or network
  • A stereo RCA input lets you connect the analog output from a CD player, streamer, or similar device
  • Some audiophile components offer balanced XLR inputs, and some of these speakers do, too
  • To keep things quiet for privacy or to avoid disturbing others, look for a pair with a headphone output
  • Voice control is available, with Amazon Alexa built-in or optional, or Google Assistant built-in or optional
  • Speakers with HDMI inputs are very popular for improving sound for movies, TV shows, and gaming
  • If you want to add more bass to your system, you’ll need speakers with a dedicated subwoofer output

Some systems offer the option to make a wireless subwoofer connection.

How loud do you want them to play?

A pair of smaller speakers may be plenty for your desktop system, but you’ll want something a little larger if you’re using them to enhance TV sound or listening to music in a larger room. A larger woofer diameter can play louder and lower, and more wattage from the built-in amplification gives you more power and clarity to fill out the soundstage in larger spaces.

KEF LS50 Wireless II speakers (background) offer impressive power and bass response, but the smaller KEF LSX speakers (foreground) may suit a smaller space better.

What about sound quality?

All of these speakers sound good, but how and where you intend to use them makes a difference. The largest, most powerful pair may not automatically be best for every situation.

Speakers with single woofers in the 4″ to 6″ range are what I’d call the average size. The Klipsch speakers I mentioned earlier are a good example. Speakers in this size range are good for general use in just about any room. They have enough power to fill a larger space.

Some manufacturers go all out to create an audiophile-grade experience. I’ve tested speakers like the KEF LS50 Wireless II and enjoyed them as much as any traditional high-end stereo system. Some models have multiple amplifiers built in, advanced digital signal processing to help EQ the speakers to suit your room, and even a dedicated midrange driver to create a more full, accurate sound.

Smaller desktop speakers — like the compact Kanto YU2 — are designed to flank your computer monitor and provide a near-field listening experience that won’t translate well if you try to crank them up in your living room. They’re really designed for up-close listening.

Compact YU2 speakers create an immersive near-field listening experience that’s ideal for desktop use.

What else will I need?

Speaker stands are important for getting the speakers at ear level for a proper soundstage, but they offer other advantages, too. A good set of stands can minimize vibrations that might cause your desk to rattle unpleasantly, or interfere with the smooth operation of your turntable.

Our top picks

I’ve had the good fortune to hear or use all of the powered stereo speakers we carry at Crutchfield, so I can make some informed recommendations for which speakers work best in specific situations.

Best desktop computer speakers — Audioengine HD3

Audioengine HD3 monitors are compact all-stars. The left speaker offers micro USB, 3.5mm minijack, and stereo RCA inputs. That’s plenty for the types of devices we tend to use when seated at a computer — they definitely work best when you sit close and angle them toward your ears to create an immersive near-field listening experience. And the built-in aptX HD Bluetooth makes for high-quality music streaming from compatible devices.

When I borrowed a pair to use at home, they were versatile enough to satisfy two very different computer users. I enjoyed listening to music out loud while working and paying bills. When I let my son use the computer for PC gaming, I had the option of declaring quiet time and asking him to plug a set of headphones into the front of the left speaker. Kind of a lifesaver.

Budget-friendly alternative

Mackie CR3-XBT speakers are compact and versatile, with built-in Bluetooth. And they offer a 1/4″ TRS input, so aspiring musicians and producers can use them as desktop studio monitors, too.

What our customers say about the Audioengine HD3 speakers

Great sound from a small set of speakers. Perfect for my home office set up.

Crutchfield Customer from Franklin, TN

Read all of the Crutchfield customer reviews

Best value — Kanto YU6

Kanto YU6 monitors are really my do-it-all all-stars. They feature a solid 5-1/4″ woofer and 1″ silk dome tweeter that reveal a warm, inviting sound. The bass is pretty surprising for speakers that don’t take up a ton of room, thanks to a rear-firing port on each speaker. I own a pair and have used them at home for years.

These speakers offer all the connections I need on the the left (powered) speaker:

  • dual optical digital inputs let me connect to my TV, and another digital component like a CD player
  • I’m a turntable owner, so I flip the switch on the RCA inputs to “phono” — they also accept line input
  • a 3. 5mm aux input lets you make a wired connection to your phone or tablet
  • a mono RCA output lets you connect to a powered subwoofer for even more bass

And the built-in aptX HD Bluetooth makes for high-quality music streaming from compatible devices.

I’d recommend these to anyone who’s trying to make the best out of a small space — like a bedroom or home office — where you want good sound quality without a bulky setup.

Budget-friendly alternative

Audioengine A2+ Wireless speakers lack the optical input offered by our main pick in this category, but they’re still a big-time customer favorite for music listening. The Aramid fiber woofer and silk dome tweeter offer a slightly warmer tone that some listeners prefer.

What our customers say about Kanto YU6 speakers

Amazing little speakers that deliver crisp and clean audio that fills a medium sized room.

Crutchfield customer from Chesterfield, VA

Read all of the Crutchfield customer reviews

    Best powered speakers for TV — Klipsch The Nines

    These speakers are the latest from the company that brought us the extremely popular R-41PM and R-51PM powered speakers. Klipsch excels at making powered speakers that look good, sound great, and have plenty of connections. And The Nines do all of that in crowd-pleasing fashion.

    The built-in HDMI ARC port is perfect for connecting a TV or gaming console, and the speakers can be your main living room speakers, especially if you don’t have space for a full surround sound system. Klipsch also provided an optical digital input, a minijack aux input, and a Type-B USB for connecting a computer. And there’s a dedicated phono input for turntable fans.

    I think the most impressive thing about The Nines is the rich, full sound they produce. Klipsch has been making dynamite speakers for a long time, and they loaded this pair with 8″ high-excursion woofers and a 1″ titanium tweeter in their signature Tractrix® horn. We demoed them at Crutchfield HQ and were absolutely delighted with the balanced, accurate, and impactful sound they delivered. There is a mono RCA output for connecting a powered sub, but The Nines go plenty deep on their own.

    Budget-friendly alternative

    A pair of ELAC Debut ConneX DCB41 speakers can do a lot, with a very reasonable price tag. The company is rightfully famous for creating big sound with relatively compact speakers, and the sound quality is always excellent. The active speaker in this set features an HDMI ARC port, so you can pair it with just about any TV.

    What our customers say about Klipsch The Nines

    These speakers floored me from day one. Crystal clear clarity, high fidelity… rich, full, and vibrant. The entire room is full.

    Crutchfield Customer from Crestwood, KY

    Read all of the Crutchfield customer reviews

      Best bass — KEF LS50 Wireless II

      A lot of clever design and technology go into each pair of these KEF LS50 Wireless II speakers. Most powered stereo speakers put one amplifier in the left speaker and run speaker wire to the passive speaker on the right. The LS50 wireless has two custom-designed amplifiers in each speaker — delivering 280 watts to each woofer, and 100 watts to each tweeter — so each driver gets exactly as much power as it needs.

      Now about that bass. The innovative Uni-Q driver configuration, the shape of the cabinet, and the built-in digital signal processing work together to create truly impressive low-end sound that goes down to 45 Hz without a subwoofer. I’ve heard a pair of the original LS50s fill our cavernous old training room at Crutchfield HQ, and I’ve heard the original and version II at home in my two-bedroom apartment. Let’s just say they both announce their presence with authority, in big rooms or small ones.

      Budget-friendly alternative

      I’m sort of cheating with this pick. Each individual, spherical Syng Cell Alpha goes beyond stereo sound into triphonic sound, thanks to three horn-loaded midrange drivers with concentrically mounted horn-loaded tweeters. But the similarly unconventional dual 6-1/2″ force-canceling subwoofers absolutely deliver room-filling bass that few other powered speakers can match.

      What our customers say about the KEF LS50 Wireless II speakers

      Outstanding audiophile standmount speaker with extended frequency response belying its relatively small size.

      Crutchfield Customer from Charlottesville, VA

      Read all of the Crutchfield customer reviews

        Best powered speakers for audiophiles — Sony Signature Series SA-Z1

        There are so many options for this category, but the Sony Signature Series SA-Z1 is so clearly the cream of the crop. Their unique driver layout and custom digital processing deliver top-notch sonic realism with a wide soundstage.

        They obviously look like nothing else in our warehouse, and they’ve got it where it counts when it comes to sound quality. Each speaker has two 4″ woofers placed back-to-back in a layout inspired by the Japanese Tsuzumi drum, with each woofer powered by a 35-watt amplifier. And each speaker combines a primary 3/4″ soft dome tweeter with two smaller “assist” tweeters for expanded off-axis response and increased acoustic realism.

        Audiophiles will definitely appreciate the plethora of connections, which include balanced XLR input, a proprietary port for high-res Sony Walkman® or Xperia devices, and a USB Type-B port that’s connected to a 32-bit/768kHz DAC that adds richness, warmth, and depth to high-resolution digital files.

        The upshot: they sound amazing.

        Budget-friendly alternative

        Proper amplification is a key element any time you’re trying to get great sound out of a pair of speakers. JBL 4305P Studio Monitors are bi-amped, meaning each woofer and tweeter has its own dedicated amplifier for greater headroom and lower distortion. They also sport a truly impressive array of inputs, including a pair of combo XLR/TRS inputs for a high-quality analog connection.

        What our customers say about the Sony Signature Series SA-Z1 speakers

        It’s like the artist plays in front of you. Or you are transported to the concert hall right away. This is magic. Highly recommended.

        – Crutchfield Customer from Seattle, WA

        Read all of the Crutchfield customer reviews

          Best powered speakers for turntable users — Q Acoustics Q Active 200 System

          This was one of the harder choices for me to make. There are plenty of powered speakers with built-in phono preamps, and they all sound pretty darn good. But the Q Acoustics Q Active 200 system gets my vote for sound quality plus versatility. The moving magnet phono input is on a separate hub, which most powered speakers don’t have, but the hub connects wirelessly to the DSP-enabled speakers, which gives you expanded placement options to suit your unique listening space. That ability to effectively customize their output for your listening needs gives them the edge.

          Budget-friendly alternative

          I love the signature combo of a rigid aluminum woofer with the highly responsive air motion transformer (AMT) tweeter on the Kanto TUK speakers. AMT “tweeters” are prized for their fidelity and ability to produce a wide soundstage, and that’s something I really want when I’m listening to vinyl. When I hooked them up at home, they even revealed a fair amount of subtle detail in favorite recordings I’d listened to numerous times before.

          What our expert says about the Q Acoustics Q Active System

          These speakers let me hear things I never noticed before, in songs I’d listened to several dozen times. Their ability to resolve minute details impressed me immensely.

          – Crutchfield copywriter Archer A.

          Read Crutchfield customer reviews

          A good pair of powered stereo speakers can let you connect all of your music sources, and save tons of space.

          Need help choosing?

          If you’ve narrowed down your options, but need a little help deciding between two strong contenders, we’re here to help. Contact us, and we’ll make sure you end up with everything you need.

          Acoustic Energy AE1 Active review

          When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works.

          What Hi-Fi? Awards 2018 winner. Active speakers that do everything with a flourish
          Tested at £1000

          What Hi-Fi? Verdict

          It’s difficult to think of an amplifier/passive speakers combo that could better these Acoustic Energy active speakers at the price

          TODAY’S BEST DEALS

          Pros
          • +

            Clear, balanced and detailed

          • +

            Rhythmically exciting with fine dynamic range

          • +

            Adjustable treble and bass for versatile placement

          Cons
          • Nothing of note

          Why you can trust What Hi-Fi?
          Our expert team reviews products in dedicated test rooms, to help you make the best choice for your budget. Find out more about how we test.

          We like tradition. It’s what puts sprouts on our plate every Christmas.

          (Year after year we shuffled them toward the edge of the plate, attempting to locate the mouth of some gluttonous house pet. Then, at some point, they became the highlight of the day.)

          Tradition also states that, every four years, there must be some blind, faint hope that our team will not exit the World Cup with a whimper.

          In hi-fi, tradition can mean a lot of boxes and a lot of clutter – but it can also mean finely tuned system-matching and plenty of scope for upgrading. It means versatility and, often, better overall performance.

          Active speakers are hardly a gargantuan deviation from tradition, but it’s rare to find a pair at this price that leave us struggling to come up with alternative separates that can match their talents.

          • Acoustic Energy AE1 Active at Richer Sounds for £1,050

          Build and compatibility

          Acoustic Energy’s AE1 Actives are relatively basic in terms of set-up and function. Connect them to your source via either their RCA or balanced XLR inputs and you’re ready to go.

          There’s no Bluetooth – but attaching a separate module post-purchase would be far more cost-effective than for AE to have integrated the technology itself, and decent pre-amps and streamers with wireless capability are far from hard to find.

          While not common, the AE1s’ method is scarcely rewriting the rulebook either. Each drive unit is driven by a dedicated 50W class A/B power amplifier module, while dials at the back of each cabinet allow for treble adjustment and bass cut up or down by 2dB.

          MORE: How to build the perfect speaker

          The drivers themselves are likely to be familiar to anyone already acquainted with Acoustic Energy speakers.

          The mid/bass drivers are products of the company’s pure piston ceramic aluminium cone technology, the use of metal for its rigidity targeting a more consistent output; the aluminium dome tweeters benefit from AE’s Wide Dispersion Technology waveguide for enhanced room integration.

          And they’re all wrapped up in a charmingly unassuming box. Available in Piano Black, Piano White or Piano Cherry real wood veneer finishes, the AE1s’ faces are bare but for the drivers underlined by the brand name – and at only 30cm tall they won’t dominate the landscape of your living room. The sonic landscape, however, is a different matter.

          MORE: How to buy speakers and set them up for the best sound

          We test the AE1s primarily using the balanced XLR connection to our reference Gamut pre-amp and Naim NDS/555 PS streamer, but the consistency of their character, irrespective of source or means of attachment, is worth celebrating right from the off.

          We end up with them slightly toed in, around 1.5m from boundary walls – but those bass and treble controls mean you’re free to tweak their response in synergy with their placement if space is at a premium.

          The AE1s deserve decent, hefty speaker stands. They never cross a line with our lighter speaker stands, but the sturdier the better – and they’re worthy of more than an MDF bookshelf.

          Their presentation is forward, but that’s not to say they lack subtlety or dimension, just that they’re endearingly excitable.

          MORE: How to build the perfect hi-fi system

          Sound

          The range of music we play while testing – and the time spent listening, unable to tear ourselves away – is testament to their talent.

          We get through a hefty chunk of our library over a number of days, and with each album the AE1s’ response is absolutely a delight.

          Play Soulwax’s FROM DEEWEE and the speakers’ character reveals itself almost from the outset. The rising synthesizer phrases of Present Tense ring with clarity and vigour – there is granular detail to their waveforms and an climbing sense of anticipation.

          MORE: Best speaker deals – hi-fi, Bluetooth, wireless

          With Masterplanned we get a sense of the AE1s’ fine integration and balance. The synth hook stabs away at the low end, with substantial body in the midrange to showcase the vocal melody, and control over potentially coarse percussion in the treble.

          We’re also treated to these speakers’ punch and drive. Rhythms jab as much as time, able to contrast often quite ghostly vocal lines with the verve and swagger of their synth-led polyrhythmic accompaniments.

          MORE: Best hi-fi speakers 2018

          This record is so dependent on the delivery of its rhythmic personality, and the AE1s convey it brilliantly.

          Timing is spot on, of course, but equally the dynamic range is subtle and extensive enough to spotlight differing intensities of beats that can, texturally, be cluttered.

          Fast-forward to Is It Always Binary, for example, an unabashed album highlight. Relying on timing or timbre of the drums alone to differentiate rhythmic strands is not enough – the AE1s allow the 4/4 to pulse while busier strands lead each bar into the next.

          Verdict

          Simply, these AE1s do everything they do with a flourish. And that’s not only by the standards of directly competing active speaker alternatives, but also by what we’ve been able to achieve in any price-comparable amp/speakers combination.

          So yes, we love tradition, and we love hi-fi separates. But it’s a much more expensive pair of components that will offer a marked improvement on these Acoustic Energy active speakers – and you owe it to yourself to track down a pair to discover that for yourself.

          See all our Acoustic Energy reviews

          Acoustic Energy AE1 Active: Price Comparison

          £1,049

          View

          £1,049

          View

          Low Stock

          No price information

          Check Amazon

          Show More Deals

          powered by

          What Hi-Fi?, founded in 1976, is the world’s leading independent guide to buying and owning hi-fi and home entertainment products. Our comprehensive tests help you buy the very best for your money, with our advice sections giving you step-by-step information on how to get even more from your music and movies. Everything is tested by our dedicated team of in-house reviewers in our custom-built test rooms in London, Reading and Bath. Our coveted five-star rating and Awards are recognised all over the world as the ultimate seal of approval, so you can buy with absolute confidence.

          Read more about how we test

          China Tonewinner Subwoofer 10 inch TV Woofer Manufacturer

          House

          / SERIES AB

          /
          / Subwoofer Tonewinner 10″ TV woofer


          Active subwoofer overview SUB-10

          The sound of this subwoofer is extremely shocking, and it can create amazing low frequencies in a room of about 30 square meters, which is indispensable for home theater systems.

          1. Appearance characteristics

          The overall appearance of SUB-10 is elegant and refined in execution, and the reliability of the line is good. Use 10-inch large magnets, powerful long-throw subwoofer drivers and durable extra-thick MDF cabinets.

          2. Circuitry

          The 130 W (8 ohm) power amplifier built into the box is the power source for the active subwoofer. The circuit is a traditional high-precision electronic separation element, and the high-speed high-fidelity audio amplifier circuit is used as the main power amplifier. In today’s traditional high fidelity audio power amplifier circuit, which has been very mature, the reliability, sound quality, durability and stability of products can greatly reduce the chance of failure. So current Tonewinner subwoofers, whether they are Tonewinner branded products or OEM for many other brands. The design and manufacture or OEM of many well-known European and American brands use this very reliable and mature traditional analog audio power amplifier circuit. Tonewwinner’s SUB-10BC Home Active Midrange Subwoofer has no such circuitry. Therefore, the rejection rate is very low and everyone can choose it with confidence.

          3. Description of the main function

          For HI-FI enthusiasts, SUB-10BC can well complement the low frequencies in the original HI-FI or AV system, especially suitable for Tonewinner Fidelity series home theater system to enhance the bass in a large audiovisual environment, which can greatly improve the HI-FI performance great speakers and ultra-low frequency in the background music FI / AV.

          An active subwoofer is the ultimate home theater companion. It can greatly improve the sound of the live home theater effect and create an extremely shocking and immersive surround sound field. No matter how good the quality of the home theater itself is, it is very necessary to add one or more large-caliber active subwoofers. In fact, for home theaters, the effect of a subwoofer is indeed better than without a subwoofer. a lot of.

          Options

          SUB-10VS-N

          ≥80 dB

          Driver

          10″ x 1

          frequency response

          30Hz-250Hz (+1/-3dB)

          Input level

          ≤700 mVrms

          Specific consumption

          ≤150W

          speaker box

          wooden

          Supply voltage

          ~220V 50Hz

          Size

          380*380*430mm

          1. There is no content here, please return to the main page.

          1. There is no content here, please return to the main page.

            Tags :

          • TV subwoofer manufacturer in China.
          • loud concert subwoofer 10″ 200 W
          • wholesale magnetic subwoofer
          • subwoofer soundbar for TV supplier
          • oem crossover subwoofer wooden bass
          • custom subwoofer better than original
          • Previous

            Tonewinner 10″ ebony subwoofer manufactured
          • Next

            Tonewinner wholesale 12 inch active speakers black subwoofer

          Leave a message

          If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.

          How to connect speakers to an LG TV – LG MAGAZINE Russia

          Modern LG TVs boast high-quality sound. Nevertheless, many owners of equipment want to further improve the audio system by connecting speakers to the TV. This allows you to enjoy surround sound of the highest quality.

          Before you start connecting speakers, you need to check which audio connectors your LG TV model is equipped with. The most common are digital HDMI connector, line-in (MiniJack) or specialized SCART or RCA speaker connectors.

          LG Smart TV models have the ability to connect wireless speakers via Bluetooth.

          Let’s consider each of them in more detail:

          HDMI – found in the most modern models of TVs and home theaters. Allows you to transfer information without loss of quality.

          If you are going to connect a powerful audio center with built-in amplifiers to your TV, it is recommended to use HDMI connectors.

          MiniJack , SCART (comb) and RCA (tulip) are not designed for high power audio systems. When using these connectors, you need to be especially careful, because if you connect acoustics with more than the permissible power to the TV, there is a risk of damage or even failure of the equipment.

          The second thing to look at is the speakers themselves. Acoustic systems are active and passive, and the connection method depends on their type.

          The active speaker system has a built-in amplifier and is connected to the mains for power. In the vast majority of cases, these speakers are connected to the TV using 3.5 mm inputs, designated MiniJack or TRS. In the event that your LG TV does not have such connectors, you can solve the problems by purchasing an additional MiniJack / RCA adapter.

          The passive speaker system is not equipped with an amplifier, it must be purchased separately and the speakers must be connected first to it, and only then through the amplifier to the TV. In this case, there is a possibility that the sound quality will not be optimal.

          Here’s what you need to pay attention to when choosing an amplifier:

          • Its power should not be higher than the power of the speakers (more than a third). Carefully read the User’s Guide to the columns – this information is sure to be there.
          • Amplifier and speaker impedance must be equal.
          • The wire with which the amplifier will be connected to the TV is very important. Experts recommend not using a cord with a cross section of less than 2 mm.

          How to connect speakers to your TV with wires: step-by-step instructions

          1. After deciding on the type of connector, connect the HDMI, RCA or MiniJack cable to the appropriate socket on the back of the TV.
          2. If you are connecting speakers from your computer to your TV, use your TV as a power source. To do this, connect them to any free USB port on the rear panel.
          3. Adjust the sound settings on the TV.

          How to connect wireless speakers to your TV: step-by-step instructions

          1. Turn on the TV with the remote control.
          2. In the “Menu” find the section Bluetooth and make sure that this option is active.
          3. In the list of available devices, find the Bluetooth speaker you want to connect.
          4. Synchronize devices.

          After you have successfully connected the speakers to your LG TV, you need to complete the process by adjusting the audio settings on the TV itself.

          • Select “Home” from the menu (“Home” icon).
          • Go to the “Settings” section (“Gear icon”).
          • In the upper right corner, find the icon with three vertical dots, and in it – the “Sound” section.
          • In the “Audio output” subsection, select “Audio output (optical/HDMI ARC)”.
          • Activate SIMPLINK mode.

          If you are using a speaker system that supports LG Sound Sync:

          • From the menu, select Home (Home icon).
          • Go to the “Settings” section (“Gear icon”).
          • In the upper right corner, find the icon with three vertical dots, and in it – the “Sound” section.

Powered tv speaker: Speakers For Tv : Target

Best powered speakers for 2023

In this article: I’ll provide shopping tips to help you find the best powered stereo speakers for your home or office listening area. And I’ll recommend six of the best powered stereo speaker models I’ve tried…

  1. Best desktop computer speakers — Audioengine HD3
  2. Best value — Kanto YU6
  3. Best powered speakers for TV — Klipsch The Nines
  4. Best bass — KEF LS50 Wireless II
  5. Best powered speakers for audiophiles — Sony Signature Series SA-Z1
  6. Best powered speakers for turntable users — Q Acoustics Q Active 200 System

… with a budget-friendly alternative to each pick.

I love powered stereo speakers. They’re basically bookshelf speakers with one or more amplifiers built in (also known as active speakers). They don’t need to run through a receiver or integrated amp, which is nice in a smaller space.

I’ve used a pair of Klipsch powered speakers at home for a while now. They give me everything I need to play music from my chosen sources — wired connections for my TV, gaming system, and turntable, plus Bluetooth for music streaming. And they sound excellent, which is really the most important thing!

The Klipsch speakers suit my situation best, but there are plenty of other models that fulfill different needs. This guide will give you an idea of what to look for when shopping for the best active speakers for your home. Then I’ll make some recommendations based on my hands-on (or is it ears-on?) experience with various models.

You can plug your computer or another music source directly into a set of powered speakers. It’s a simple, space-saving alternative to a traditional home audio component system.

How to choose the best powered speakers

Knowing which features you want will help narrow down your choices. Ask yourself the following questions as you browse.

What sources will you be using?

Most powered speakers feature Bluetooth, and many also offer built-in Wi-Fi for music streaming. Beyond that, the most important thing to confirm is that there are enough inputs for the wired connections you want to make. Consider the following situations you may encounter:

  • optical digital inputs are useful for connecting digital components like a CD player, or the optical output of your TV
  • If you want to directly connect a turntable, look for powered speakers with a phono input and built-in phono preamp
  • A USB or Ethernet connection is great for playing high-resolution music files stored on your computer or network
  • A stereo RCA input lets you connect the analog output from a CD player, streamer, or similar device
  • Some audiophile components offer balanced XLR inputs, and some of these speakers do, too
  • To keep things quiet for privacy or to avoid disturbing others, look for a pair with a headphone output
  • Voice control is available, with Amazon Alexa built-in or optional, or Google Assistant built-in or optional
  • Speakers with HDMI inputs are very popular for improving sound for movies, TV shows, and gaming
  • If you want to add more bass to your system, you’ll need speakers with a dedicated subwoofer output

Some systems offer the option to make a wireless subwoofer connection.

How loud do you want them to play?

A pair of smaller speakers may be plenty for your desktop system, but you’ll want something a little larger if you’re using them to enhance TV sound or listening to music in a larger room. A larger woofer diameter can play louder and lower, and more wattage from the built-in amplification gives you more power and clarity to fill out the soundstage in larger spaces.

KEF LS50 Wireless II speakers (background) offer impressive power and bass response, but the smaller KEF LSX speakers (foreground) may suit a smaller space better.

What about sound quality?

All of these speakers sound good, but how and where you intend to use them makes a difference. The largest, most powerful pair may not automatically be best for every situation.

Speakers with single woofers in the 4″ to 6″ range are what I’d call the average size. The Klipsch speakers I mentioned earlier are a good example. Speakers in this size range are good for general use in just about any room. They have enough power to fill a larger space.

Some manufacturers go all out to create an audiophile-grade experience. I’ve tested speakers like the KEF LS50 Wireless II and enjoyed them as much as any traditional high-end stereo system. Some models have multiple amplifiers built in, advanced digital signal processing to help EQ the speakers to suit your room, and even a dedicated midrange driver to create a more full, accurate sound.

Smaller desktop speakers — like the compact Kanto YU2 — are designed to flank your computer monitor and provide a near-field listening experience that won’t translate well if you try to crank them up in your living room. They’re really designed for up-close listening.

Compact YU2 speakers create an immersive near-field listening experience that’s ideal for desktop use.

What else will I need?

Speaker stands are important for getting the speakers at ear level for a proper soundstage, but they offer other advantages, too. A good set of stands can minimize vibrations that might cause your desk to rattle unpleasantly, or interfere with the smooth operation of your turntable.

Our top picks

I’ve had the good fortune to hear or use all of the powered stereo speakers we carry at Crutchfield, so I can make some informed recommendations for which speakers work best in specific situations.

Best desktop computer speakers — Audioengine HD3

Audioengine HD3 monitors are compact all-stars. The left speaker offers micro USB, 3.5mm minijack, and stereo RCA inputs. That’s plenty for the types of devices we tend to use when seated at a computer — they definitely work best when you sit close and angle them toward your ears to create an immersive near-field listening experience. And the built-in aptX HD Bluetooth makes for high-quality music streaming from compatible devices.

When I borrowed a pair to use at home, they were versatile enough to satisfy two very different computer users. I enjoyed listening to music out loud while working and paying bills. When I let my son use the computer for PC gaming, I had the option of declaring quiet time and asking him to plug a set of headphones into the front of the left speaker. Kind of a lifesaver.

Budget-friendly alternative

Mackie CR3-XBT speakers are compact and versatile, with built-in Bluetooth. And they offer a 1/4″ TRS input, so aspiring musicians and producers can use them as desktop studio monitors, too.

What our customers say about the Audioengine HD3 speakers

Great sound from a small set of speakers. Perfect for my home office set up.

Crutchfield Customer from Franklin, TN

Read all of the Crutchfield customer reviews

Best value — Kanto YU6

Kanto YU6 monitors are really my do-it-all all-stars. They feature a solid 5-1/4″ woofer and 1″ silk dome tweeter that reveal a warm, inviting sound. The bass is pretty surprising for speakers that don’t take up a ton of room, thanks to a rear-firing port on each speaker. I own a pair and have used them at home for years.

These speakers offer all the connections I need on the the left (powered) speaker:

  • dual optical digital inputs let me connect to my TV, and another digital component like a CD player
  • I’m a turntable owner, so I flip the switch on the RCA inputs to “phono” — they also accept line input
  • a 3. 5mm aux input lets you make a wired connection to your phone or tablet
  • a mono RCA output lets you connect to a powered subwoofer for even more bass

And the built-in aptX HD Bluetooth makes for high-quality music streaming from compatible devices.

I’d recommend these to anyone who’s trying to make the best out of a small space — like a bedroom or home office — where you want good sound quality without a bulky setup.

Budget-friendly alternative

Audioengine A2+ Wireless speakers lack the optical input offered by our main pick in this category, but they’re still a big-time customer favorite for music listening. The Aramid fiber woofer and silk dome tweeter offer a slightly warmer tone that some listeners prefer.

What our customers say about Kanto YU6 speakers

Amazing little speakers that deliver crisp and clean audio that fills a medium sized room.

Crutchfield customer from Chesterfield, VA

Read all of the Crutchfield customer reviews

    Best powered speakers for TV — Klipsch The Nines

    These speakers are the latest from the company that brought us the extremely popular R-41PM and R-51PM powered speakers. Klipsch excels at making powered speakers that look good, sound great, and have plenty of connections. And The Nines do all of that in crowd-pleasing fashion.

    The built-in HDMI ARC port is perfect for connecting a TV or gaming console, and the speakers can be your main living room speakers, especially if you don’t have space for a full surround sound system. Klipsch also provided an optical digital input, a minijack aux input, and a Type-B USB for connecting a computer. And there’s a dedicated phono input for turntable fans.

    I think the most impressive thing about The Nines is the rich, full sound they produce. Klipsch has been making dynamite speakers for a long time, and they loaded this pair with 8″ high-excursion woofers and a 1″ titanium tweeter in their signature Tractrix® horn. We demoed them at Crutchfield HQ and were absolutely delighted with the balanced, accurate, and impactful sound they delivered. There is a mono RCA output for connecting a powered sub, but The Nines go plenty deep on their own.

    Budget-friendly alternative

    A pair of ELAC Debut ConneX DCB41 speakers can do a lot, with a very reasonable price tag. The company is rightfully famous for creating big sound with relatively compact speakers, and the sound quality is always excellent. The active speaker in this set features an HDMI ARC port, so you can pair it with just about any TV.

    What our customers say about Klipsch The Nines

    These speakers floored me from day one. Crystal clear clarity, high fidelity… rich, full, and vibrant. The entire room is full.

    Crutchfield Customer from Crestwood, KY

    Read all of the Crutchfield customer reviews

      Best bass — KEF LS50 Wireless II

      A lot of clever design and technology go into each pair of these KEF LS50 Wireless II speakers. Most powered stereo speakers put one amplifier in the left speaker and run speaker wire to the passive speaker on the right. The LS50 wireless has two custom-designed amplifiers in each speaker — delivering 280 watts to each woofer, and 100 watts to each tweeter — so each driver gets exactly as much power as it needs.

      Now about that bass. The innovative Uni-Q driver configuration, the shape of the cabinet, and the built-in digital signal processing work together to create truly impressive low-end sound that goes down to 45 Hz without a subwoofer. I’ve heard a pair of the original LS50s fill our cavernous old training room at Crutchfield HQ, and I’ve heard the original and version II at home in my two-bedroom apartment. Let’s just say they both announce their presence with authority, in big rooms or small ones.

      Budget-friendly alternative

      I’m sort of cheating with this pick. Each individual, spherical Syng Cell Alpha goes beyond stereo sound into triphonic sound, thanks to three horn-loaded midrange drivers with concentrically mounted horn-loaded tweeters. But the similarly unconventional dual 6-1/2″ force-canceling subwoofers absolutely deliver room-filling bass that few other powered speakers can match.

      What our customers say about the KEF LS50 Wireless II speakers

      Outstanding audiophile standmount speaker with extended frequency response belying its relatively small size.

      Crutchfield Customer from Charlottesville, VA

      Read all of the Crutchfield customer reviews

        Best powered speakers for audiophiles — Sony Signature Series SA-Z1

        There are so many options for this category, but the Sony Signature Series SA-Z1 is so clearly the cream of the crop. Their unique driver layout and custom digital processing deliver top-notch sonic realism with a wide soundstage.

        They obviously look like nothing else in our warehouse, and they’ve got it where it counts when it comes to sound quality. Each speaker has two 4″ woofers placed back-to-back in a layout inspired by the Japanese Tsuzumi drum, with each woofer powered by a 35-watt amplifier. And each speaker combines a primary 3/4″ soft dome tweeter with two smaller “assist” tweeters for expanded off-axis response and increased acoustic realism.

        Audiophiles will definitely appreciate the plethora of connections, which include balanced XLR input, a proprietary port for high-res Sony Walkman® or Xperia devices, and a USB Type-B port that’s connected to a 32-bit/768kHz DAC that adds richness, warmth, and depth to high-resolution digital files.

        The upshot: they sound amazing.

        Budget-friendly alternative

        Proper amplification is a key element any time you’re trying to get great sound out of a pair of speakers. JBL 4305P Studio Monitors are bi-amped, meaning each woofer and tweeter has its own dedicated amplifier for greater headroom and lower distortion. They also sport a truly impressive array of inputs, including a pair of combo XLR/TRS inputs for a high-quality analog connection.

        What our customers say about the Sony Signature Series SA-Z1 speakers

        It’s like the artist plays in front of you. Or you are transported to the concert hall right away. This is magic. Highly recommended.

        – Crutchfield Customer from Seattle, WA

        Read all of the Crutchfield customer reviews

          Best powered speakers for turntable users — Q Acoustics Q Active 200 System

          This was one of the harder choices for me to make. There are plenty of powered speakers with built-in phono preamps, and they all sound pretty darn good. But the Q Acoustics Q Active 200 system gets my vote for sound quality plus versatility. The moving magnet phono input is on a separate hub, which most powered speakers don’t have, but the hub connects wirelessly to the DSP-enabled speakers, which gives you expanded placement options to suit your unique listening space. That ability to effectively customize their output for your listening needs gives them the edge.

          Budget-friendly alternative

          I love the signature combo of a rigid aluminum woofer with the highly responsive air motion transformer (AMT) tweeter on the Kanto TUK speakers. AMT “tweeters” are prized for their fidelity and ability to produce a wide soundstage, and that’s something I really want when I’m listening to vinyl. When I hooked them up at home, they even revealed a fair amount of subtle detail in favorite recordings I’d listened to numerous times before.

          What our expert says about the Q Acoustics Q Active System

          These speakers let me hear things I never noticed before, in songs I’d listened to several dozen times. Their ability to resolve minute details impressed me immensely.

          – Crutchfield copywriter Archer A.

          Read Crutchfield customer reviews

          A good pair of powered stereo speakers can let you connect all of your music sources, and save tons of space.

          Need help choosing?

          If you’ve narrowed down your options, but need a little help deciding between two strong contenders, we’re here to help. Contact us, and we’ll make sure you end up with everything you need.

          Which Is Better for Your TV?

          Every product is carefully selected by our editors. If you buy from a link, we may earn a commission.

          The problem: You just bought a 4K TV and it works and looks great, but the sound quality of its built-in speakers is trash. You can’t hear the dialogue. The bass is terrible. And the sound is just too quiet, even when you crank it. You want to improve your TV’s sound but you don’t want to deal with all the moving pieces of a surround sound system and you don’t want to spend a ton — what should you do?

          The answer: Lucky for you, you have a few great options that will improve your TV’s sound. First, you can buy a soundbar. Two, you can buy a speaker system that plugs right into your TV. Or three, you can go the traditional route of buying an AV receiver and a pair of passive loudspeakers. All three options can be done affordably and with very little setup hassles. But which should you choose?

          Naturally, there are advantages and disadvantages to all three. How much space do you have in and around your TV? Is your TV wall mounted or it sitting on a media console? How easily does installation have to be? Do you want to deal with a ton of wires? Do you value ease of setup or sound quality? Do you eventually see yourself expanding your system in the future?

          Those are all very important questions to answer before setting out on your journey.

          Option A: The Soundbar

          Sonos

          A soundbar is the easiest of the three options, as it’s just one speaker and it’s essentially just a plug-and-play operation. It’s (probably) the more affordable option, too. There are a lot of different soundbars options out there, but we recommend that that you buy at least a three-channel (3. 0) soundbar. This means that the soundbar will three separate drivers in it — for left, right and center — and sound significantly better and more immersive than just your TV.

          You also want to buy a soundbar that supports HDMI ARC. This means that the soundbar plugs directly into your TV through the HDMI ARC port, allowing you to change the volume of the soundbar (and TV) with one remote. It simplifies things. (For reference, many older soundbars hook up to your TV via an optical connection, which doesn’t as high resolution audio or as immersive technologies.)

          The last thing to consider is whether or not you are going to want to built out your soundbar system down the round. Many of these soundbar manufacturers also sell wireless subwoofers and rear-channel speakers, so you can add to your system later on to make it more immersive. Some soundbars don’t allow you to built out a more immersive surround sound system, so it’s worth thinking about your long-term plan ahead of time.

          Recap
          Pros: Easy installation, affordable
          Cons: Less flexibility to eventually built-out your system

          3 Great Soundbars to Buy

          Option B: Powered Speakers

          Klipsch

          If you want the true stereo sound that a pair of loudspeakers delivers, but don’t want to deal with the extra component that is an AV receiver, you’ve got an option. There’s a new breed of powered speakers that have an HDMI or optical connection. This means that can hook up your speakers directly to your TV. No AV receiver required.

          The biggest advantage of this dual speaker system is audio quality. The positioning of the speakers — one on either side of the TV — will naturally make the system sound more immersive. The other advantage is that they have most of the same conveniences as modern soundbars, including a plug-and-play installation, built-in Bluetooth and Wi-Fi for easy music streaming, as well as subwoofer outputs so you can build out the system later on down the road.

          The downside to active powered speaker systems is that they tend to be expensive. Also, there aren’t that many of these system out there. Klipsch’s The Fives, which were just released in 2020, were the first powered speakers to have an HDMI-ARC connection.

          Recap
          Pros: Wider soundstage, easy installation
          Cons: Requires more room, more expensive, rare

          3 Great Powered Speakers to Buy

          Option C: Passive Bookshelf Speakers and AV Receiver

          Henry Phillips

          A great pair of passive bookshelf speakers can also make great TV speakers. And you can buy a great pair of loudspeakers for right around $300. ELAC, Q Acoustics, Fluance, Kanto and Wharfedale are just a few audio companies that make speakers in this price range. The catch is that you’ll also need to buy an AV receiver, which will connect the TV and the speakers. Yamaha, Denon, Onkyo and Sony all make affordable options.

          This is the more traditional home theater setup. It’s usually the more expensive option (compared to buying a soundbar) as you’re buying both speakers and an AV receiver, but it does have some distinct advantages. It gives you more flexibility to add to your system later on down the road, say if you want to add a center channel speaker or a wireless subwoofer. And you’re not nearly as tied into a brand’s ecosystem — you can mix and max future speakers by different brands together because they all can talk to each other through the AV receiver.

          The last thing bit of buying advice, at least as far as the AV receiver is concerned, is that you might want to buy one with the future in mind. If you think you’re going to eventually want to build a more immersive surround sound system, you want to buy an AV receiver that supports five, seven or more channels. You also want to make sure that it supports surround sound technologies, like Dolby Atmos or DTS:X; if the AV receiver supports them, you can build out a speaker system that supports them, too.

          Recap
          Pros: Wider soundstage, more flexibility to build out your system the way you want
          Cons: Requires more room, generally more expensive, installation is more complicated

          3 Great Passive Bookshelf Speakers to Buy

          China Tonewinner Subwoofer 10 inch TV Woofer Manufacturer

          House

          / SERIES AB

          /
          / Subwoofer Tonewinner 10″ TV woofer


          Active subwoofer overview SUB-10

          The sound of this subwoofer is extremely shocking, and it can create amazing low frequencies in a room of about 30 square meters, which is indispensable for home theater systems.

          1. Appearance characteristics

          The overall appearance of SUB-10 is elegant and refined in execution, and the reliability of the line is good. Use 10-inch large magnets, powerful long-throw subwoofer drivers and durable extra-thick MDF cabinets.

          2. Circuitry

          The 130 W (8 ohm) power amplifier built into the box is the power source for the active subwoofer. The circuit is a traditional high-precision electronic separation element, and the high-speed high-fidelity audio amplifier circuit is used as the main power amplifier. In today’s traditional high fidelity audio power amplifier circuit, which has been very mature, the reliability, sound quality, durability and stability of products can greatly reduce the chance of failure. So current Tonewinner subwoofers, whether they are Tonewinner branded products or OEM for many other brands. The design and manufacture or OEM of many well-known European and American brands use this very reliable and mature traditional analog audio power amplifier circuit. Tonewwinner’s SUB-10BC Home Active Midrange Subwoofer has no such circuitry. Therefore, the rejection rate is very low and everyone can choose it with confidence.

          3. Description of the main function

          For HI-FI enthusiasts, SUB-10BC can well complement the low frequencies in the original HI-FI or AV system, especially suitable for Tonewinner Fidelity series home theater system to enhance the bass in a large audiovisual environment, which can greatly improve the HI-FI performance great speakers and ultra-low frequency in the background music FI / AV.

          An active subwoofer is the ultimate home theater companion. It can greatly improve the sound of the live home theater effect and create an extremely shocking and immersive surround sound field. No matter how good the quality of the home theater itself is, it is very necessary to add one or more large-caliber active subwoofers. In fact, for home theaters, the effect of a subwoofer is indeed better than without a subwoofer. a lot of.

          Options

          SUB-10VS-N

          ≥80 dB

          Driver

          10″ x 1

          frequency response

          30Hz-250Hz (+1/-3dB)

          Input level

          ≤700 mVrms

          Specific consumption

          ≤150W

          speaker box

          wooden

          Supply voltage

          ~220V 50Hz

          Size

          380*380*430mm

          1. There is no content here, please return to the main page.

          1. There is no content here, please return to the main page.

            Tags :

          • TV subwoofer manufacturer in China.
          • loud concert subwoofer 10″ 200 W
          • wholesale magnetic subwoofer
          • subwoofer soundbar for TV supplier
          • oem crossover subwoofer wooden bass
          • custom subwoofer better than original
          • Previous

            Tonewinner 10″ ebony subwoofer manufactured
          • Next

            Tonewinner wholesale 12 inch active speakers black subwoofer

          Leave a message

          If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.

          How to connect speakers to an LG TV – LG MAGAZINE Russia

          Modern LG TVs boast high-quality sound. Nevertheless, many owners of equipment want to further improve the audio system by connecting speakers to the TV. This allows you to enjoy surround sound of the highest quality.

          Before you start connecting speakers, you need to check which audio connectors your LG TV model is equipped with. The most common are digital HDMI connector, line-in (MiniJack) or specialized SCART or RCA speaker connectors.

          LG Smart TV models have the ability to connect wireless speakers via Bluetooth.

          Let’s consider each of them in more detail:

          HDMI – found in the most modern models of TVs and home theaters. Allows you to transfer information without loss of quality.

          If you are going to connect a powerful audio center with built-in amplifiers to your TV, it is recommended to use HDMI connectors.

          MiniJack , SCART (comb) and RCA (tulip) are not designed for high power audio systems. When using these connectors, you need to be especially careful, because if you connect acoustics with more than the permissible power to the TV, there is a risk of damage or even failure of the equipment.

          The second thing to look at is the speakers themselves. Acoustic systems are active and passive, and the connection method depends on their type.

          The active speaker system has a built-in amplifier and is connected to the mains for power. In the vast majority of cases, these speakers are connected to the TV using 3.5 mm inputs, designated MiniJack or TRS. In the event that your LG TV does not have such connectors, you can solve the problems by purchasing an additional MiniJack / RCA adapter.

          The passive speaker system is not equipped with an amplifier, it must be purchased separately and the speakers must be connected first to it, and only then through the amplifier to the TV. In this case, there is a possibility that the sound quality will not be optimal.

          Here’s what you need to pay attention to when choosing an amplifier:

          • Its power should not be higher than the power of the speakers (more than a third). Carefully read the User’s Guide to the columns – this information is sure to be there.
          • Amplifier and speaker impedance must be equal.
          • The wire with which the amplifier will be connected to the TV is very important. Experts recommend not using a cord with a cross section of less than 2 mm.

          How to connect speakers to your TV with wires: step-by-step instructions

          1. After deciding on the type of connector, connect the HDMI, RCA or MiniJack cable to the appropriate socket on the back of the TV.
          2. If you are connecting speakers from your computer to your TV, use your TV as a power source. To do this, connect them to any free USB port on the rear panel.
          3. Adjust the sound settings on the TV.

          How to connect wireless speakers to your TV: step-by-step instructions

          1. Turn on the TV with the remote control.
          2. In the “Menu” find the section Bluetooth and make sure that this option is active.
          3. In the list of available devices, find the Bluetooth speaker you want to connect.
          4. Synchronize devices.

          After you have successfully connected the speakers to your LG TV, you need to complete the process by adjusting the audio settings on the TV itself.

          • Select “Home” from the menu (“Home” icon).
          • Go to the “Settings” section (“Gear icon”).
          • In the upper right corner, find the icon with three vertical dots, and in it – the “Sound” section.
          • In the “Audio output” subsection, select “Audio output (optical/HDMI ARC)”.
          • Activate SIMPLINK mode.

          If you are using a speaker system that supports LG Sound Sync:

          • From the menu, select Home (Home icon).
          • Go to the “Settings” section (“Gear icon”).
          • In the upper right corner, find the icon with three vertical dots, and in it – the “Sound” section.

Powered tv speaker: Best powered speakers for 2023

Best powered speakers for 2023

In this article: I’ll provide shopping tips to help you find the best powered stereo speakers for your home or office listening area. And I’ll recommend six of the best powered stereo speaker models I’ve tried…

  1. Best desktop computer speakers — Audioengine HD3
  2. Best value — Kanto YU6
  3. Best powered speakers for TV — Klipsch The Nines
  4. Best bass — KEF LS50 Wireless II
  5. Best powered speakers for audiophiles — Sony Signature Series SA-Z1
  6. Best powered speakers for turntable users — Q Acoustics Q Active 200 System

… with a budget-friendly alternative to each pick.

I love powered stereo speakers. They’re basically bookshelf speakers with one or more amplifiers built in (also known as active speakers). They don’t need to run through a receiver or integrated amp, which is nice in a smaller space.

I’ve used a pair of Klipsch powered speakers at home for a while now. They give me everything I need to play music from my chosen sources — wired connections for my TV, gaming system, and turntable, plus Bluetooth for music streaming. And they sound excellent, which is really the most important thing!

The Klipsch speakers suit my situation best, but there are plenty of other models that fulfill different needs. This guide will give you an idea of what to look for when shopping for the best active speakers for your home. Then I’ll make some recommendations based on my hands-on (or is it ears-on?) experience with various models.

You can plug your computer or another music source directly into a set of powered speakers. It’s a simple, space-saving alternative to a traditional home audio component system.

How to choose the best powered speakers

Knowing which features you want will help narrow down your choices. Ask yourself the following questions as you browse.

What sources will you be using?

Most powered speakers feature Bluetooth, and many also offer built-in Wi-Fi for music streaming. Beyond that, the most important thing to confirm is that there are enough inputs for the wired connections you want to make. Consider the following situations you may encounter:

  • optical digital inputs are useful for connecting digital components like a CD player, or the optical output of your TV
  • If you want to directly connect a turntable, look for powered speakers with a phono input and built-in phono preamp
  • A USB or Ethernet connection is great for playing high-resolution music files stored on your computer or network
  • A stereo RCA input lets you connect the analog output from a CD player, streamer, or similar device
  • Some audiophile components offer balanced XLR inputs, and some of these speakers do, too
  • To keep things quiet for privacy or to avoid disturbing others, look for a pair with a headphone output
  • Voice control is available, with Amazon Alexa built-in or optional, or Google Assistant built-in or optional
  • Speakers with HDMI inputs are very popular for improving sound for movies, TV shows, and gaming
  • If you want to add more bass to your system, you’ll need speakers with a dedicated subwoofer output

Some systems offer the option to make a wireless subwoofer connection.

How loud do you want them to play?

A pair of smaller speakers may be plenty for your desktop system, but you’ll want something a little larger if you’re using them to enhance TV sound or listening to music in a larger room. A larger woofer diameter can play louder and lower, and more wattage from the built-in amplification gives you more power and clarity to fill out the soundstage in larger spaces.

KEF LS50 Wireless II speakers (background) offer impressive power and bass response, but the smaller KEF LSX speakers (foreground) may suit a smaller space better.

What about sound quality?

All of these speakers sound good, but how and where you intend to use them makes a difference. The largest, most powerful pair may not automatically be best for every situation.

Speakers with single woofers in the 4″ to 6″ range are what I’d call the average size. The Klipsch speakers I mentioned earlier are a good example. Speakers in this size range are good for general use in just about any room. They have enough power to fill a larger space.

Some manufacturers go all out to create an audiophile-grade experience. I’ve tested speakers like the KEF LS50 Wireless II and enjoyed them as much as any traditional high-end stereo system. Some models have multiple amplifiers built in, advanced digital signal processing to help EQ the speakers to suit your room, and even a dedicated midrange driver to create a more full, accurate sound.

Smaller desktop speakers — like the compact Kanto YU2 — are designed to flank your computer monitor and provide a near-field listening experience that won’t translate well if you try to crank them up in your living room. They’re really designed for up-close listening.

Compact YU2 speakers create an immersive near-field listening experience that’s ideal for desktop use.

What else will I need?

Speaker stands are important for getting the speakers at ear level for a proper soundstage, but they offer other advantages, too. A good set of stands can minimize vibrations that might cause your desk to rattle unpleasantly, or interfere with the smooth operation of your turntable.

Our top picks

I’ve had the good fortune to hear or use all of the powered stereo speakers we carry at Crutchfield, so I can make some informed recommendations for which speakers work best in specific situations.

Best desktop computer speakers — Audioengine HD3

Audioengine HD3 monitors are compact all-stars. The left speaker offers micro USB, 3.5mm minijack, and stereo RCA inputs. That’s plenty for the types of devices we tend to use when seated at a computer — they definitely work best when you sit close and angle them toward your ears to create an immersive near-field listening experience. And the built-in aptX HD Bluetooth makes for high-quality music streaming from compatible devices.

When I borrowed a pair to use at home, they were versatile enough to satisfy two very different computer users. I enjoyed listening to music out loud while working and paying bills. When I let my son use the computer for PC gaming, I had the option of declaring quiet time and asking him to plug a set of headphones into the front of the left speaker. Kind of a lifesaver.

Budget-friendly alternative

Mackie CR3-XBT speakers are compact and versatile, with built-in Bluetooth. And they offer a 1/4″ TRS input, so aspiring musicians and producers can use them as desktop studio monitors, too.

What our customers say about the Audioengine HD3 speakers

Great sound from a small set of speakers. Perfect for my home office set up.

Crutchfield Customer from Franklin, TN

Read all of the Crutchfield customer reviews

Best value — Kanto YU6

Kanto YU6 monitors are really my do-it-all all-stars. They feature a solid 5-1/4″ woofer and 1″ silk dome tweeter that reveal a warm, inviting sound. The bass is pretty surprising for speakers that don’t take up a ton of room, thanks to a rear-firing port on each speaker. I own a pair and have used them at home for years.

These speakers offer all the connections I need on the the left (powered) speaker:

  • dual optical digital inputs let me connect to my TV, and another digital component like a CD player
  • I’m a turntable owner, so I flip the switch on the RCA inputs to “phono” — they also accept line input
  • a 3. 5mm aux input lets you make a wired connection to your phone or tablet
  • a mono RCA output lets you connect to a powered subwoofer for even more bass

And the built-in aptX HD Bluetooth makes for high-quality music streaming from compatible devices.

I’d recommend these to anyone who’s trying to make the best out of a small space — like a bedroom or home office — where you want good sound quality without a bulky setup.

Budget-friendly alternative

Audioengine A2+ Wireless speakers lack the optical input offered by our main pick in this category, but they’re still a big-time customer favorite for music listening. The Aramid fiber woofer and silk dome tweeter offer a slightly warmer tone that some listeners prefer.

What our customers say about Kanto YU6 speakers

Amazing little speakers that deliver crisp and clean audio that fills a medium sized room.

Crutchfield customer from Chesterfield, VA

Read all of the Crutchfield customer reviews

    Best powered speakers for TV — Klipsch The Nines

    These speakers are the latest from the company that brought us the extremely popular R-41PM and R-51PM powered speakers. Klipsch excels at making powered speakers that look good, sound great, and have plenty of connections. And The Nines do all of that in crowd-pleasing fashion.

    The built-in HDMI ARC port is perfect for connecting a TV or gaming console, and the speakers can be your main living room speakers, especially if you don’t have space for a full surround sound system. Klipsch also provided an optical digital input, a minijack aux input, and a Type-B USB for connecting a computer. And there’s a dedicated phono input for turntable fans.

    I think the most impressive thing about The Nines is the rich, full sound they produce. Klipsch has been making dynamite speakers for a long time, and they loaded this pair with 8″ high-excursion woofers and a 1″ titanium tweeter in their signature Tractrix® horn. We demoed them at Crutchfield HQ and were absolutely delighted with the balanced, accurate, and impactful sound they delivered. There is a mono RCA output for connecting a powered sub, but The Nines go plenty deep on their own.

    Budget-friendly alternative

    A pair of ELAC Debut ConneX DCB41 speakers can do a lot, with a very reasonable price tag. The company is rightfully famous for creating big sound with relatively compact speakers, and the sound quality is always excellent. The active speaker in this set features an HDMI ARC port, so you can pair it with just about any TV.

    What our customers say about Klipsch The Nines

    These speakers floored me from day one. Crystal clear clarity, high fidelity… rich, full, and vibrant. The entire room is full.

    Crutchfield Customer from Crestwood, KY

    Read all of the Crutchfield customer reviews

      Best bass — KEF LS50 Wireless II

      A lot of clever design and technology go into each pair of these KEF LS50 Wireless II speakers. Most powered stereo speakers put one amplifier in the left speaker and run speaker wire to the passive speaker on the right. The LS50 wireless has two custom-designed amplifiers in each speaker — delivering 280 watts to each woofer, and 100 watts to each tweeter — so each driver gets exactly as much power as it needs.

      Now about that bass. The innovative Uni-Q driver configuration, the shape of the cabinet, and the built-in digital signal processing work together to create truly impressive low-end sound that goes down to 45 Hz without a subwoofer. I’ve heard a pair of the original LS50s fill our cavernous old training room at Crutchfield HQ, and I’ve heard the original and version II at home in my two-bedroom apartment. Let’s just say they both announce their presence with authority, in big rooms or small ones.

      Budget-friendly alternative

      I’m sort of cheating with this pick. Each individual, spherical Syng Cell Alpha goes beyond stereo sound into triphonic sound, thanks to three horn-loaded midrange drivers with concentrically mounted horn-loaded tweeters. But the similarly unconventional dual 6-1/2″ force-canceling subwoofers absolutely deliver room-filling bass that few other powered speakers can match.

      What our customers say about the KEF LS50 Wireless II speakers

      Outstanding audiophile standmount speaker with extended frequency response belying its relatively small size.

      Crutchfield Customer from Charlottesville, VA

      Read all of the Crutchfield customer reviews

        Best powered speakers for audiophiles — Sony Signature Series SA-Z1

        There are so many options for this category, but the Sony Signature Series SA-Z1 is so clearly the cream of the crop. Their unique driver layout and custom digital processing deliver top-notch sonic realism with a wide soundstage.

        They obviously look like nothing else in our warehouse, and they’ve got it where it counts when it comes to sound quality. Each speaker has two 4″ woofers placed back-to-back in a layout inspired by the Japanese Tsuzumi drum, with each woofer powered by a 35-watt amplifier. And each speaker combines a primary 3/4″ soft dome tweeter with two smaller “assist” tweeters for expanded off-axis response and increased acoustic realism.

        Audiophiles will definitely appreciate the plethora of connections, which include balanced XLR input, a proprietary port for high-res Sony Walkman® or Xperia devices, and a USB Type-B port that’s connected to a 32-bit/768kHz DAC that adds richness, warmth, and depth to high-resolution digital files.

        The upshot: they sound amazing.

        Budget-friendly alternative

        Proper amplification is a key element any time you’re trying to get great sound out of a pair of speakers. JBL 4305P Studio Monitors are bi-amped, meaning each woofer and tweeter has its own dedicated amplifier for greater headroom and lower distortion. They also sport a truly impressive array of inputs, including a pair of combo XLR/TRS inputs for a high-quality analog connection.

        What our customers say about the Sony Signature Series SA-Z1 speakers

        It’s like the artist plays in front of you. Or you are transported to the concert hall right away. This is magic. Highly recommended.

        – Crutchfield Customer from Seattle, WA

        Read all of the Crutchfield customer reviews

          Best powered speakers for turntable users — Q Acoustics Q Active 200 System

          This was one of the harder choices for me to make. There are plenty of powered speakers with built-in phono preamps, and they all sound pretty darn good. But the Q Acoustics Q Active 200 system gets my vote for sound quality plus versatility. The moving magnet phono input is on a separate hub, which most powered speakers don’t have, but the hub connects wirelessly to the DSP-enabled speakers, which gives you expanded placement options to suit your unique listening space. That ability to effectively customize their output for your listening needs gives them the edge.

          Budget-friendly alternative

          I love the signature combo of a rigid aluminum woofer with the highly responsive air motion transformer (AMT) tweeter on the Kanto TUK speakers. AMT “tweeters” are prized for their fidelity and ability to produce a wide soundstage, and that’s something I really want when I’m listening to vinyl. When I hooked them up at home, they even revealed a fair amount of subtle detail in favorite recordings I’d listened to numerous times before.

          What our expert says about the Q Acoustics Q Active System

          These speakers let me hear things I never noticed before, in songs I’d listened to several dozen times. Their ability to resolve minute details impressed me immensely.

          – Crutchfield copywriter Archer A.

          Read Crutchfield customer reviews

          A good pair of powered stereo speakers can let you connect all of your music sources, and save tons of space.

          Need help choosing?

          If you’ve narrowed down your options, but need a little help deciding between two strong contenders, we’re here to help. Contact us, and we’ll make sure you end up with everything you need.

          Acoustic Energy AE1 Active review

          When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works.

          What Hi-Fi? Awards 2018 winner. Active speakers that do everything with a flourish
          Tested at £1000

          What Hi-Fi? Verdict

          It’s difficult to think of an amplifier/passive speakers combo that could better these Acoustic Energy active speakers at the price

          TODAY’S BEST DEALS

          Pros
          • +

            Clear, balanced and detailed

          • +

            Rhythmically exciting with fine dynamic range

          • +

            Adjustable treble and bass for versatile placement

          Cons
          • Nothing of note

          Why you can trust What Hi-Fi?
          Our expert team reviews products in dedicated test rooms, to help you make the best choice for your budget. Find out more about how we test.

          We like tradition. It’s what puts sprouts on our plate every Christmas.

          (Year after year we shuffled them toward the edge of the plate, attempting to locate the mouth of some gluttonous house pet. Then, at some point, they became the highlight of the day.)

          Tradition also states that, every four years, there must be some blind, faint hope that our team will not exit the World Cup with a whimper.

          In hi-fi, tradition can mean a lot of boxes and a lot of clutter – but it can also mean finely tuned system-matching and plenty of scope for upgrading. It means versatility and, often, better overall performance.

          Active speakers are hardly a gargantuan deviation from tradition, but it’s rare to find a pair at this price that leave us struggling to come up with alternative separates that can match their talents.

          • Acoustic Energy AE1 Active at Richer Sounds for £1,050

          Build and compatibility

          Acoustic Energy’s AE1 Actives are relatively basic in terms of set-up and function. Connect them to your source via either their RCA or balanced XLR inputs and you’re ready to go.

          There’s no Bluetooth – but attaching a separate module post-purchase would be far more cost-effective than for AE to have integrated the technology itself, and decent pre-amps and streamers with wireless capability are far from hard to find.

          While not common, the AE1s’ method is scarcely rewriting the rulebook either. Each drive unit is driven by a dedicated 50W class A/B power amplifier module, while dials at the back of each cabinet allow for treble adjustment and bass cut up or down by 2dB.

          MORE: How to build the perfect speaker

          The drivers themselves are likely to be familiar to anyone already acquainted with Acoustic Energy speakers.

          The mid/bass drivers are products of the company’s pure piston ceramic aluminium cone technology, the use of metal for its rigidity targeting a more consistent output; the aluminium dome tweeters benefit from AE’s Wide Dispersion Technology waveguide for enhanced room integration.

          And they’re all wrapped up in a charmingly unassuming box. Available in Piano Black, Piano White or Piano Cherry real wood veneer finishes, the AE1s’ faces are bare but for the drivers underlined by the brand name – and at only 30cm tall they won’t dominate the landscape of your living room. The sonic landscape, however, is a different matter.

          MORE: How to buy speakers and set them up for the best sound

          We test the AE1s primarily using the balanced XLR connection to our reference Gamut pre-amp and Naim NDS/555 PS streamer, but the consistency of their character, irrespective of source or means of attachment, is worth celebrating right from the off.

          We end up with them slightly toed in, around 1.5m from boundary walls – but those bass and treble controls mean you’re free to tweak their response in synergy with their placement if space is at a premium.

          The AE1s deserve decent, hefty speaker stands. They never cross a line with our lighter speaker stands, but the sturdier the better – and they’re worthy of more than an MDF bookshelf.

          Their presentation is forward, but that’s not to say they lack subtlety or dimension, just that they’re endearingly excitable.

          MORE: How to build the perfect hi-fi system

          Sound

          The range of music we play while testing – and the time spent listening, unable to tear ourselves away – is testament to their talent.

          We get through a hefty chunk of our library over a number of days, and with each album the AE1s’ response is absolutely a delight.

          Play Soulwax’s FROM DEEWEE and the speakers’ character reveals itself almost from the outset. The rising synthesizer phrases of Present Tense ring with clarity and vigour – there is granular detail to their waveforms and an climbing sense of anticipation.

          MORE: Best speaker deals – hi-fi, Bluetooth, wireless

          With Masterplanned we get a sense of the AE1s’ fine integration and balance. The synth hook stabs away at the low end, with substantial body in the midrange to showcase the vocal melody, and control over potentially coarse percussion in the treble.

          We’re also treated to these speakers’ punch and drive. Rhythms jab as much as time, able to contrast often quite ghostly vocal lines with the verve and swagger of their synth-led polyrhythmic accompaniments.

          MORE: Best hi-fi speakers 2018

          This record is so dependent on the delivery of its rhythmic personality, and the AE1s convey it brilliantly.

          Timing is spot on, of course, but equally the dynamic range is subtle and extensive enough to spotlight differing intensities of beats that can, texturally, be cluttered.

          Fast-forward to Is It Always Binary, for example, an unabashed album highlight. Relying on timing or timbre of the drums alone to differentiate rhythmic strands is not enough – the AE1s allow the 4/4 to pulse while busier strands lead each bar into the next.

          Verdict

          Simply, these AE1s do everything they do with a flourish. And that’s not only by the standards of directly competing active speaker alternatives, but also by what we’ve been able to achieve in any price-comparable amp/speakers combination.

          So yes, we love tradition, and we love hi-fi separates. But it’s a much more expensive pair of components that will offer a marked improvement on these Acoustic Energy active speakers – and you owe it to yourself to track down a pair to discover that for yourself.

          See all our Acoustic Energy reviews

          Acoustic Energy AE1 Active: Price Comparison

          £1,049

          View

          £1,049

          View

          Low Stock

          No price information

          Check Amazon

          Show More Deals

          powered by

          What Hi-Fi?, founded in 1976, is the world’s leading independent guide to buying and owning hi-fi and home entertainment products. Our comprehensive tests help you buy the very best for your money, with our advice sections giving you step-by-step information on how to get even more from your music and movies. Everything is tested by our dedicated team of in-house reviewers in our custom-built test rooms in London, Reading and Bath. Our coveted five-star rating and Awards are recognised all over the world as the ultimate seal of approval, so you can buy with absolute confidence.

          Read more about how we test

          China Tonewinner Subwoofer 10 inch TV Woofer Manufacturer

          House

          / SERIES AB

          /
          / Subwoofer Tonewinner 10″ TV woofer


          Active subwoofer overview SUB-10

          The sound of this subwoofer is extremely shocking, and it can create amazing low frequencies in a room of about 30 square meters, which is indispensable for home theater systems.

          1. Appearance characteristics

          The overall appearance of SUB-10 is elegant and refined in execution, and the reliability of the line is good. Use 10-inch large magnets, powerful long-throw subwoofer drivers and durable extra-thick MDF cabinets.

          2. Circuitry

          The 130 W (8 ohm) power amplifier built into the box is the power source for the active subwoofer. The circuit is a traditional high-precision electronic separation element, and the high-speed high-fidelity audio amplifier circuit is used as the main power amplifier. In today’s traditional high fidelity audio power amplifier circuit, which has been very mature, the reliability, sound quality, durability and stability of products can greatly reduce the chance of failure. So current Tonewinner subwoofers, whether they are Tonewinner branded products or OEM for many other brands. The design and manufacture or OEM of many well-known European and American brands use this very reliable and mature traditional analog audio power amplifier circuit. Tonewwinner’s SUB-10BC Home Active Midrange Subwoofer has no such circuitry. Therefore, the rejection rate is very low and everyone can choose it with confidence.

          3. Description of the main function

          For HI-FI enthusiasts, SUB-10BC can well complement the low frequencies in the original HI-FI or AV system, especially suitable for Tonewinner Fidelity series home theater system to enhance the bass in a large audiovisual environment, which can greatly improve the HI-FI performance great speakers and ultra-low frequency in the background music FI / AV.

          An active subwoofer is the ultimate home theater companion. It can greatly improve the sound of the live home theater effect and create an extremely shocking and immersive surround sound field. No matter how good the quality of the home theater itself is, it is very necessary to add one or more large-caliber active subwoofers. In fact, for home theaters, the effect of a subwoofer is indeed better than without a subwoofer. a lot of.

          Options

          SUB-10VS-N

          ≥80 dB

          Driver

          10″ x 1

          frequency response

          30Hz-250Hz (+1/-3dB)

          Input level

          ≤700 mVrms

          Specific consumption

          ≤150W

          speaker box

          wooden

          Supply voltage

          ~220V 50Hz

          Size

          380*380*430mm

          1. There is no content here, please return to the main page.

          1. There is no content here, please return to the main page.

            Tags :

          • TV subwoofer manufacturer in China.
          • loud concert subwoofer 10″ 200 W
          • wholesale magnetic subwoofer
          • subwoofer soundbar for TV supplier
          • oem crossover subwoofer wooden bass
          • custom subwoofer better than original
          • Previous

            Tonewinner 10″ ebony subwoofer manufactured
          • Next

            Tonewinner wholesale 12 inch active speakers black subwoofer

          Leave a message

          If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.

          How to connect speakers to an LG TV – LG MAGAZINE Russia

          Modern LG TVs boast high-quality sound. Nevertheless, many owners of equipment want to further improve the audio system by connecting speakers to the TV. This allows you to enjoy surround sound of the highest quality.

          Before you start connecting speakers, you need to check which audio connectors your LG TV model is equipped with. The most common are digital HDMI connector, line-in (MiniJack) or specialized SCART or RCA speaker connectors.

          LG Smart TV models have the ability to connect wireless speakers via Bluetooth.

          Let’s consider each of them in more detail:

          HDMI – found in the most modern models of TVs and home theaters. Allows you to transfer information without loss of quality.

          If you are going to connect a powerful audio center with built-in amplifiers to your TV, it is recommended to use HDMI connectors.

          MiniJack , SCART (comb) and RCA (tulip) are not designed for high power audio systems. When using these connectors, you need to be especially careful, because if you connect acoustics with more than the permissible power to the TV, there is a risk of damage or even failure of the equipment.

          The second thing to look at is the speakers themselves. Acoustic systems are active and passive, and the connection method depends on their type.

          The active speaker system has a built-in amplifier and is connected to the mains for power. In the vast majority of cases, these speakers are connected to the TV using 3.5 mm inputs, designated MiniJack or TRS. In the event that your LG TV does not have such connectors, you can solve the problems by purchasing an additional MiniJack / RCA adapter.

          The passive speaker system is not equipped with an amplifier, it must be purchased separately and the speakers must be connected first to it, and only then through the amplifier to the TV. In this case, there is a possibility that the sound quality will not be optimal.

          Here’s what you need to pay attention to when choosing an amplifier:

          • Its power should not be higher than the power of the speakers (more than a third). Carefully read the User’s Guide to the columns – this information is sure to be there.
          • Amplifier and speaker impedance must be equal.
          • The wire with which the amplifier will be connected to the TV is very important. Experts recommend not using a cord with a cross section of less than 2 mm.

          How to connect speakers to your TV with wires: step-by-step instructions

          1. After deciding on the type of connector, connect the HDMI, RCA or MiniJack cable to the appropriate socket on the back of the TV.
          2. If you are connecting speakers from your computer to your TV, use your TV as a power source. To do this, connect them to any free USB port on the rear panel.
          3. Adjust the sound settings on the TV.

          How to connect wireless speakers to your TV: step-by-step instructions

          1. Turn on the TV with the remote control.
          2. In the “Menu” find the section Bluetooth and make sure that this option is active.
          3. In the list of available devices, find the Bluetooth speaker you want to connect.
          4. Synchronize devices.

          After you have successfully connected the speakers to your LG TV, you need to complete the process by adjusting the audio settings on the TV itself.

          • Select “Home” from the menu (“Home” icon).
          • Go to the “Settings” section (“Gear icon”).
          • In the upper right corner, find the icon with three vertical dots, and in it – the “Sound” section.
          • In the “Audio output” subsection, select “Audio output (optical/HDMI ARC)”.
          • Activate SIMPLINK mode.

          If you are using a speaker system that supports LG Sound Sync:

          • From the menu, select Home (Home icon).
          • Go to the “Settings” section (“Gear icon”).
          • In the upper right corner, find the icon with three vertical dots, and in it – the “Sound” section.

Computer bar speakers: Best computer soundbars – SoundGuys

Best computer soundbars – SoundGuys

Let’s face it, the speakers in your computer monitor are probably not made for much beyond watching a low-quality YouTube video from 2009. While the idea of improving desktop audio quality can be nice, computer speakers take up quite a bit of real estate and can clutter up your workspace with a mess of wires. That’s where soundbars come in. Soundbars aren’t reserved just for TVs, they work well with computers due to their compact size and the fact that they often include a separate subwoofer for enhanced bass. Here are the best computer soundbars if you’re looking to listen to music, watch movies, or play games.

Why is the Creative Stage V2 2.1 the best computer soundbar for most?

The Creative Stage V2 2.1 is the best soundbar for computers because of its sleek and compact design, good sound quality, and many connection options. This no-frills soundbar does exactly what you need for a computer speaker setup. The external subwoofer and built-in dual midrange drivers deliver good and loud audio output.

Creative Stage V2 2.1 Soundbar

Creative Stage V2 2.1 Soundbar

Buy now

The soundbar fits easily under any monitor, as it’s only 68cm long and 7.8cm tall, and the subwoofer can comfortably fit next to your monitor, since its footprint is only 11.6cm x 25cm. The soundbar is also wall-mountable, making it take up even less space on your desk. You can connect to it using HDMI, optical, 3.5mm aux, USB-A, or Bluetooth using the SBC codec.

Gamers should look at the Razer Leviathan

The Razer Leviathan is the best soundbar for gamers. The Leviathan is a virtual 5.1-channel speaker setup with two full-range drivers, two tweeters, and an external subwoofer for great sound quality. Using Dolby Digital, it converts audio from your sound card, console, or other sound source to create a virtual surround sound stage. From footsteps to explosions, you can always hear what’s going on in your games.

Razer Leviathan

Razer Leviathan

Buy now

You can connect the Leviathan to your computer or other devices through 3. 5mm or optical connection, or you can connect over Bluetooth, using the SBC or aptX codecs. For only $199 USD, this soundbar has it all for your gaming PC setup.

The Creative Stage Air is the best portable and compact soundbar for computers

The Creative Stage Air is a small desktop soundbar that’s perfect for anyone on a budget. For under $50 USD, the Creative Stage Air has two dynamic drivers and a passive radiator, producing a decent bass response.

Creative Stage Air

It connects to your devices through Bluetooth using the SBC codec, or through a wired connection over USB-A or 3.5mm. The Creative Stage Air has a 2,200mAh battery, and it lasts about six and half hours. It uses the older microUSB port to charge, and it does take some time to complete a full cycle—no fast charging here.

Smart speaker-enthusiasts should look at the Sonos Beam (Gen 2)

The Sonos Beam (Gen 2) is a great option if you want a smart soundbar for your computer. It connects using HDMI eARC, WiFi, and Apple Airplay 2. It fits easily under your monitor, or you can mount it on your wall instead. It has built-in Alexa and Google Assistant support for hands-free voice control, and Dolby Atmos support.

Sonos Beam (Gen 2)

Sonos Beam (Gen 2)

Buy now

The Sonos Beam (Gen 2) features four full-range woofers, one tweeter, and a five-microphone array for voice control. If you’re looking to add to your smart speaker ecosystem, the Sonos Beam (Gen 2) is a great choice, though it’s quite pricey at $549 USD. Such is the price of Dolby Atmos and voice control, so you’re getting what you pay for here.

The budget-friendly Monoprice SB-100 is the best cheap computer soundbar

Monoprice is known for delivering high-quality products for a fraction of what the competition costs. If you want simplicity from your soundbar, the Monoprice SB-100 is just that. It’s a 2.1-channel soundbar that fits conveniently under your monitor or mounts onto your wall. It has two full-range and two low-frequency drivers, with the option to add a subwoofer if you want even more bass from it.

Monoprice SB-100

Monoprice SB-100

Buy now

The Monoprice SB-100 connects to your devices using 3.5mm, optical, or coaxial connections. You even get Bluetooth connectivity if you want to go wireless. Monoprice makes budget-friendly tech with great quality, so for $55 USD (and often even cheaper), this can be a great entry-level soundbar or just a great upgrade from your monitor’s speakers.

How is the Bose Smart Soundbar 900 for computers?

Bose This is a bit too big for a computer monitor.

The Bose Smart Soundbar 900 is mainly recommended for TVs since its focus is more on making your living room sound like a home theater. It has Dolby Atmos support to make movies more immersive from your couch. You also get Wi-Fi, Bluetooth, and Apple AirPlay 2 and Spotify Connect support to make streaming much easier. If you want to customize your experience, go ahead and download the Bose Music app.

Consider the Bose Smart Soundbar 900 if you want your computer to double as your movie screen, but for everyone else, save some money and grab something else. Most readers probably won’t need to bother spending this much on a soundbar that does more than they’ll need it to.

The best computer soundbars: Notable mentions

Switching between inputs on the Katana is easy to do whether you’re using the button up top or the remote.

  • Yamaha YAS-209: A pricier option, if you like to watch movies on your computer, this soundbar has DTS Virtual:X support for cinematic sound, a wireless subwoofer, Spotify and Amazon Music integration, and built-in Alexa assistant capabilities for voice controls.
  • LG SL5Y: This 2.1 channel soundbar also has DTS Virtual:X support, a dedicated subwoofer, and a minimal design. This one is also great if you like a cinematic movie experience at your desk.
  • Panasonic SoundSlayer: Gamers might also enjoy this soundbar, which has three different sound modes for gaming, whether you’re playing a role-playing game, a first-person shooter, or want to hear the great dialogue of your game the most. It also has Dolby Atmos and DTS Virtual:X support for cinematic gaming sessions.
  • Creative Sound Blaster X Katana: This soundbar is a great option for those who want an RGB speaker to go with the rest of their gaming PC setup. It sounds great and can get pretty loud, and the dedicated subwoofer helps games sound even better.
  • Vizio M21d-H84: If you want DTS Virtual:X and Dolby Atmos for cheap, this sub-$150 soundbar has just that. It’s easy to set up and looks great too.

What you should know about the best computer soundbars

Who should get a computer soundbar? Who shouldn’t?

Underneath the speaker is subtle RGB lighting that you can turn off, or change the colors if you want.

You should consider getting a soundbar for your computer if you want a better speaker than those built into your monitor. Soundbars work well because they don’t take up too much vertical space, and fit conveniently on your desk. Dedicated subwoofers take up more room, but you can place them beside your monitor or even on the floor.

Does surround sound matter when choosing a PC soundbar?

The large size of the Ambeo Soundbar means you need a large area for setup.

If you just plan on using your soundbar to casually listen to music, and watch movies and videos on your computer, surround sound probably doesn’t matter much. Those who are really into gaming might enjoy the effect of surround sound. Still, surround sound isn’t a necessity for games, but is more just a fun feature. It’s also worth noting that surround sound from soundbars can’t quite match up to a physical surround sound setup with separate speakers around the room.

Is bass good on soundbars without subwoofers?

This soundbar has two speaker drivers hidden behind the grille.

Soundbars can have good bass sound without a separate subwoofer, but smaller drivers in more compact soundbars will not play as loud, so a subwoofer will help if you want louder bass. If you’re just using a soundbar as a casual listening speaker, and you don’t care a ton about hearing all the nuances of your music, you probably don’t need a subwoofer. If you’re using your soundbar on a gaming PC, you may find that a subwoofer helps the experience of the game, especially in games with gunshots and explosions, or cinematic sound design.

What does a smart soundbar do?

A smart soundbar can connect to other smart speakers in the same ecosystem and use voice controls so you don’t have to get up or use a remote to control it. This can be convenient and fun, but it comes at a cost of handing over a lot of your personal data to a speaker and, by extension, a corporation. You’re better off without a smart speaker if you care a lot about privacy and protecting your personal information. They also tend to be pricey, so those on a budget probably shouldn’t consider a smart soundbar.

How we choose the best computer soundbars

On top of the speaker are the touch controls for switching inputs and controlling volume.

At SoundGuys, we want to make sure we’re recommending the best products, and with so many soundbars to choose from, we take time to narrow the options down to the ones that will serve you and your needs best. It’s important to understand the differences between soundbars for computers and those intended for TVs. Soundbars for computers will generally have fewer frills like surround sound or smart features. We want to recommend things you will actually need without spending a fortune on a soundbar made with home theaters in mind. Not everyone will value the same things, and we take that into account. We not only want to test soundbars out ourselves but listen to others’ experiences to understand what people need.

Our team then confers with one another regarding the best products for a given category and we present our list to you. It’s not over after we hit publish, though. Instead, we treat every article as a living document that we update as new and worthy products are released.

Why you should trust

SoundGuys

We state of the art equipment, like our Bruel & Kjaer 5128 artificial head, to test audio products.

Each writer at SoundGuys has accumulated years of experience reporting on the consumer audio market, and our staff adheres to a strict ethics policy. We don’t use sponsored content on the website at a time when doing so is the norm. SoundGuys’ survival depends almost exclusively on readers enjoying their purchases. We pride ourselves on transparently outlining objective facts, while accounting for the subjective experience to contextualize an audio product’s performance. When we do misspeak, we correct and own up to it.

Frequently asked questions about the best computer soundbars

Soundbars for computers should generally go under your monitor, so the sound can be directed at you without any obstructions. Subwoofer placement is less critical, and should be beside your monitor, but if you don’t have room, you can put it on the floor, or on a surface beside your desk.

Dolby Atmos is a coding and decoding technology for surround sound that includes height information. This is more noticeable when you have a physical speaker above you than with a soundbar.

Wired connections will always get you the lowest latency possible. So if you’re bothered by lag in your audio, you should go with a wired connection. This is especially important if you’re gaming, since time is of the essence.

Using a soundbar with your PC or laptop

Soundbars are most commonly used to improve the quality of TV sound, but they can also be connected to your PC to provide high-quality sound for movies and gaming. We explain when using soundbars with your desktop computer or laptop can be useful, and what you should consider when thinking about buying a soundbar for this reason.

Are soundbars too big for your PC?

One of the main arguments against using a soundbar with your computer is their size. Most commercially available soundbars designed for TV sets are often about 1 metre wide. These soundbars are just too big, both in terms of the space you might have on or under your desk and how they look in your living space, to be placed in front of or under a 21-inch monitor (approx. 50 cm). You should therefore definitely consider the size requirements, as well as your available space, when looking at soundbars.

The next important aspect concerns the interfaces and connection options in the combination of PC and soundbar.

Teufel soundbars

Connection options

When connecting external speakers or soundbars to a PC, it is important to distinguish where the audio information is processed. There are two possible constellations, the first being much more frequent: Usually the processing is done by the sound card installed in the PC; alternatively the external audio device can be equipped with a sound card (and D/A converter).

  • ➨ 1. The connection can be made via common analogue and digital audio interfaces such as AUX, TOSLINK or HDMI. Depending on whether the data was transmitted analogue or digital, the D/A converter of the computer or the external audio device will be used.
  • ➨ 2. The interface with which the external sound card is controlled is crucial for it to be used at all. As a rule, USB is intended for this purpose.

An obvious question in connection with sound cards is: what good is an additional sound card if it is already installed in the PC? The answer depends on the quality of sound cards and converters used on computers (usually a sound chip on the motherboard). This can be an important factor that means that high-quality speakers on PCs can perform significantly poorer than their technical capabilities.

Read more about the importance of sound cards in our article “Sound cards: How to get the most out of computer sound”.

Wi-Fi and Bluetooth as wireless connection standards are a standard feature for many soundbars and especially practical for external players such as smartphones. In principle, an external sound card can also be controlled for the wireless transmission of audio data. Read more here about Bluetooth soundbars.

Sound requirements for network audio

The actual performance requirements for PC soundbars can sometimes be low, as often only a small listening space needs to be provided with sound. However, this of course does not mean that film and game sound on computers should settle for a poorer quality. For good quality audio, clean playback even at high levels and over a wide frequency range is essential. Spatially differentiated sound effects can also add a new dimension to gaming fun.

Soundbars offer particularly large possibilities for the reproduction of surround sound. Multi-channel transducer architectures can be implemented in soundbars, and can do far more than provide a neat stereo panorama. Modulation techniques and targeted tuning of the transducers allow for a authentic, virtual surround sound to be created. This is exactly what Teufel’s stereo-widening Dynamore® Ultra technology achieves.

Cinebar One – tailor-made for strong PC sound

This soundbar can be connected to PC, consoles, TV and mobile devices.

Even though it is only 35 cm wide, the Cinebar One is a real sound giant. We have not only integrated four innovative full-range speakers with side-firing speakers into the compact soundbar, but also all important interfaces and a powerful sound card.

  • ▶ Virtual surround sound from a soundbar with Dynamore® Ultra technology
  • ▶ Bluetooth 4.0 with aptX transmission standard for streaming sound in CD quality
  • ▶ HDMI 2.0 (CEC), Line-In, TOSLINK and USB for versatile integration into home entertainment systems
  • ▶ Can be extended to a Cinebar One+ with an external subwoofer for stronger bass

By loading the video, you agree to YouTube’s privacy policy.
Learn more

Load video

Always unblock YouTube

Our solutions for PC and gaming sound

Conclusion: Combining soundbars and PCs

  • Compactness is an important factor when it comes to soundbars that will be used on a desk for PC sound.
  • Soundbars are usually compatible with a PC/laptop via various interfaces.
  • An additional soundbar can significantly improve the computer sound.
  • Soundbars are particularly well suited for creating surround sound simulations.

my way / DIY (DIY) / iXBT Live

This guide is primarily interesting because it uses non-standard approaches in design, use of materials and manufacturing method – the final product is completely made on a 40w CO2 laser cutter.

I renovated my daughters room, bought a new PC, connected UPS. The matter remained for the small – for the columns. Of course, you could go to the store (no, you can’t anymore, COVID, however) or order online, but the requirements for size, design and sound quality were such that you would have to take at least either Harman Kardon Soundsticks 4, or something from Bose or Bang & Olufsen. Simply put, at least 300 bucks would have to be laid out, or even many times more. But then I thought, am I my own engineer or what? And I decided to build a 2.1 system from scratch, which will fit into the updated design of the room, will have a decent sound, but at the same time, not cost an indecent price. During the design process, the columns were given the working name “Santa Barbara”, but this is not at all in honor of the famous series, but more in honor of the visual, which I managed to make quite interesting and atypical, being based on my impressions after getting acquainted with the architecture of the above city, 10 years ago.

Why 2.1 and not “full” 2.0 speakers? The reason, as always, is the size. My daughter’s computer desk is small, only a meter wide, and I didn’t want to litter it with large speakers. Therefore, I decided to make compact, but high-quality satellites, and hide the subwoofer under the table (although I originally planned to make a subwoofer for desktop placement). In general, initially I did not plan a 2.1 system, but I wanted to make something like a sound bar, and I wanted so much that I developed two different designs and even began to implement them in a tree, but upon mature reflection, I nevertheless made a choice towards a 2.1 system, since in order to get a decent sound from the “soundbar” form factor that would fit on the desktop, it would be necessary to install a good DSP and use very expensive speakers, and in this case, at the cost of all materials, I easily “fit” in $ 50, while saving space on the table.

Soundbar frame, which never went into the “series”

And this is how the finished system already looks in the “assembly”. (Yes, I am aware that the monitor is a little old, and the color does not fit the room. The replacement is already in the process of being manufactured, and there will be a separate review on it)

Structurally, the system consists of two satellites measuring 120x85x65mm, in which there is a 50mm full-range speaker with a neodymium magnet and a 50mm passive radiator with a rubber suspension. The subwoofer has dimensions of 300x200x100mm, it uses a bass speaker with a diameter of 75mm, and the subwoofer itself is made according to the Band Pass acoustic scheme. Also, in the subwoofer case there is a 2.1 class D amplifier, on two TPA3116 microcircuits, a 17V 3A toroidal transformer, a rectifier and other little things. The satellite cases are made of 3mm plywood, with additional impregnation and damping, and the subwoofer case is made of 10mm plywood, also with gluing and damping. The dimensions of both the speakers and the subwoofer are dictated by the maximum working field of my K40 laser cutter, which is 30x20cm.

A little note about photos at different stages. Don’t be embarrassed that the speakers in the photographs slightly change shape and appearance during the manufacturing process – several different prototypes were made, and each manufacturing stage was documented on separate prototypes, hence the possible “discrepancies”.

When designing satellites, I was guided by several requirements at once.

  1. The design should be subdued, modern-minimalistic, in the so-called “Apple” style (which was actually created by Braun designer Dieter Rams back in the late 60s).
  2. At the same time, the design should be original, not copy anyone or anything in particular, and use simple geometric shapes to make it easy to make at home.
  3. Home conditions also dictated the choice of a method for manufacturing speaker cabinets – “normal” and photopolymer 3D printing was discarded for obvious reasons, I don’t have a Meta * l Sinthering 3D printer yet, just like I don’t have a 5-axis CNC milling machine, so it was decided to make a cabinet out of plywood, and cut everything on a laser cutter.
  4. Waste disposal is my strong point, so I decided to finish the speakers not with a vulgar wood-like film or wood veneer, but with the remnants of wallpaper from the children’s room, which have a fine-grained stone structure and are great for the chosen geometry. (Although initially I considered (and even made prototypes) options using leatherette or alcantara. But I decided that it would be better to use such materials where they belong – in a car, and at home and ordinary wallpaper will do).

The drawing for the satellite housing was created in semi-automatic mode on the makercase.com website – we enter the required dimensions, material thickness, select the shape and the site will generate. An SVG file that can be directly sent to a laser cutter, or, as in my case, slightly modified and cut out for mounting speakers and a passive radiator in Corel Draw.

The front and rear panels of the speakers were made of 3mm cream-beige plexiglass with 3mm plywood inserts covered in brown acoustic fabric. Also, holders for passive radiators were made of plywood.

Initially, I planned that one of the speakers would have volume and tone controls “on board”, but due to the complexity of manufacturing and wiring, I decided to abandon it and make both speakers the same. I also had to abandon the decorative nameplate – it turned out to be visually too small and did not fit into the overall design.

Similar to the speakers, the subwoofer enclosure was also created in Corel Draw. Practice has shown the redundancy of so many mounting holes – the idea was to use them to ensure that the body parts are pressed tightly against each other when gluing, since I do not have a clamp or vise of the right size. But as it turned out, the number of holes can be safely reduced by half.

The subwoofer driver was a Bang & Olufsen BeoSound ($1200 RRP) smart speaker bass driver with a 3-inch cone size. In satellites, I used 50mm speakers from JBL bluetooth speakers (Charge 3, if I remember correctly). I will immediately answer the logical questions – “Where did I get it and how much”, I took it for money, and where I took it, they are no longer there and are unlikely to be again).

After all materials are prepared, proceed to assembly. First, glue the speaker case – it must be airtight to get a decent sound. The rounded part of the speaker has many slots, due to which the necessary flexibility is provided, so I will seal them in the first place. To do this, it is better to use PVA glue – first you need to glue the part that will be on the inside with glue, bend it in the desired shape and insert the rest of the parts into the grooves so that the body “gathers”.

We wrap the satellite body with masking tape, and depending on the ambient temperature, let it dry, at least for half an hour, or even more. The next step is to coat the assembled structure with PVA glue from the outside. You don’t have to immediately pour a lot of glue, it will dry longer, and bumps will appear on the surface, and cleaning PVA with sandpaper is not an easy task. I applied 4 thin coats, at 15 minute intervals, drying the structure on the battery between coats, making sure that all the grooves were securely filled with glue. After that, we leave the speaker to dry in heat for at least 12 hours, and at this time, you can glue a passive radiator to the back of the case, and the speaker itself to the front. For gluing the emitter, urethane sealant was the most suitable – silicone and “moment” with “nairite” did not stick to the rubber part of the emitter, and cyanoacrylic glue fell off from vibrations. For greater hardness, when gluing, I used a plywood washer, which presses the emitter to the panel. In the process of gluing, after all the screws are tightly tightened, it is necessary to carefully clean off the excess sealant that has leaked into the emitter.

The speaker can be glued to the front panel in the same way. But since it will be additionally pressed with screws, strong glue is not needed here, and it is quite possible to get by with a simple silicone sealant, which dries faster and is more convenient to use, compared to urethane.

After the individual components have dried, you can proceed to the assembly of the body itself. First, we connect the front panel and the main body together. For this purpose, I used a “5 minute” epoxy glue. You should not waste time sealing all the cracks with epoxy – it’s better for her to make a couple of other “tacks”, keeping an eye on the evenness and geometry, and when it dries, coat the seams from the inside with either silicone or urethane sealant – both work equally well, but I prefer silicone – as I wrote above, it’s easier to apply, it dries faster, and in which case, you can help yourself in the right places with your finger.

Since the speaker (and, accordingly, the center of gravity in our upper part) and the speaker itself will be tilted back, the first prototypes were very unstable, and easily overturned from powerful bass. To improve stability, a metal plate was fixed at the bottom of the column. In my case – a piece from ********* (the first one who has read so far, and guessed what this plate is from, will receive 500KR from me).

As practice has shown, the weight of one plate turned out to be insufficient – although the speaker did not tip over anymore, it jumped fervently on the table from the bass, therefore, a second plate had to be added.

After the sealant between the front and sides has dried thoroughly, you can glue the sides and front panel from the inside with sound-absorbing felt – this will help to remove cabinet resonances that would otherwise give the sound “out of a cardboard box”. Felt should also be glued to the back panel – after assembling the column – this will be problematic.

Glue the rear panel “dotted” with epoxy glue along the contour, and coat the inside with silicone sealant. But the bottom is already glued only on silicone, not sparing the sealant so that there are no air leaks (of course, before that you need to solder the wire to the speaker and lead it through one of the holes that was used to attach the pressure washer of the passive radiator, and drown out the other 3).

For reliability, we wait a couple of hours (or better – a night), and start the air leak test. It is done very simply, we rhythmically press the passive radiator and look at the speaker cone – it should move in time with the pressings, and with approximately the same amplitude as the radiator itself. If the movements are noticeably weak, and even so, just for control, it is worth checking the body for cracks. To do this, we wet our lips, bring the speaker to the lips in places of joints and rhythmically press the emitter – if there is a leak somewhere, we will feel a chill on our lips. After the place of the leak is localized (and it is quite possible that there will be several of them at once), we slightly expand the place of the leak with a clerical knife, and pour in the silicone – so that a slide is formed 2-3 mm high. After the silicone dries well, we cut off everything protruding with a clerical knife, in no case tearing it off – this way you can pull out the “cork”. So, let’s do a leak test again.

After the tightness test has been passed, it would be nice to test for resonance and rattle – we connect the speaker to an amplifier, the amplifier to a computer or a low-frequency generator, and apply a sinusoidal signal in the range of 100Hz-10kHz, gradually increasing both the frequency and power, while listening to overtones. If a rattling appears at any frequency, then by poking (or rather, squeezing and pressing), we determine the resonating place. If such a place is found, then we make a small (2-3mm) hole in it, and fill in a little bit of silicone. Let dry and check again. If the rattling could not be defeated by external mechanical action, then the column can be disassembled, or rather, cut to pull out the speaker and emitter – the case will have to be made anew.

If everything went well, then you can start finishing, and later – false panels. For pasting the column with wallpaper, I tried several different methods – wallpaper glue, PVA glue, Moment glue, epoxy glue, double-sided tape, and it was the latter that proved to be the best – both in terms of ease of repetition, and in terms of the quality of the final result.

We will need a thin double-sided adhesive tape – this is usually used for gluing carpets and other utensils. They glue the body of the column around the perimeter. A small life hack – such adhesive tape sometimes starts to make wrinkles after gluing. To avoid this, before gluing the roll of adhesive tape must be thoroughly warmed up, for example, by putting it on the battery for an hour, and sticking it on the case in an interference fit.

We also glue the perimeter of the ends with 2-sided adhesive tape, but this time with narrow tape, it is not worth completely covering the ends with adhesive tape, since then we will get problems with fastening the false panels.

From the wallpaper roll, cut off a piece long enough to wrap the column in an overlap, and 2-3 centimeters wider than the depth of the column. We start pasting the column from the bottom, stretching the wallpaper in the process of gluing. After the entire perimeter has been pasted over, we make cuts along the protruding edges of the wallpaper, approximately as shown in the photo.

Sipping on these “ears”, glue them to the ends of the speaker. Don’t overdo it with stringing, I tore off a couple pieces in the process and had to start all over again.

If the adhesive tape or wallpaper comes off the ends, then you can warm them up a little on the spot – with a heat gun, iron, and so on. After the process is completed, you need to cut the wallpaper a little along with adhesive tape around the perimeter – we will have false panels made of plexiglass, we will glue them, and it is not so easy to securely glue plexiglass to plywood, you need epoxy, and not every one is suitable. As practice has shown, epoxy adhesives with a weak or sulfurous odor do not glue plexiglass well, and those that have a very sharp, “chemical” smell glue well.

The next step is the production of the front false panel. It is made of plexiglass, with plywood inserts and, again, plexiglass.

Lay an acoustically transparent cloth over the plexiglass contour and insert the corresponding parts into the corresponding slots. The acoustic fabric should be stretched a little – it is better if you have someone to help and hold it.

We check how well the fabric is stretched, and cut off the protruding excess first with scissors, and then “go through” the joints with a soldering iron – the fabric melts and fuses into the plexiglass, thus providing a reliable connection.

After processing with a soldering iron, if you do not cut the fabric into a butt, you may get uneven edges, as in the photo above. Carefully cut them off with a knife, and again go through the edges with a soldering iron.

The rear false panel does not require such tricks, since everything is simple there – just cut it and that’s it.

Before gluing the panels, sand them lightly with 80-100 grit on the inside. This will improve the strength of the adhesive line. For gluing we will use epoxy glue, I wrote about the choice of type a little higher. We apply the panel, center it relative to the body and let it dry well – despite the stated curing time of 5-10-15-30 minutes, the real hardness of the gluing site is ensured after 12 or even 24 hours.

This is what the finished front speaker looks like.

Moving on to subwoofer assembly. As already mentioned, it is made of 10mm thick plywood, and uses a band pass box acoustic circuit. It also houses the amplifier and power supply.

The photo shows an almost finished case with a short phase inverter installed. As practice has shown, the phase inverter turned out to be tuned to a very high frequency, so that the resonance, by ear, was somewhere in the region of 200-300 Hz. Therefore, the bass reflex tube was lengthened with a piece of PVC pipe, to a length at which the sound was perceived most pleasantly. Of course, this extreme lengthening of the pipe caused a typical problem with the sound – it became a little fart. But this happens only at such volumes at which this subwoofer will never work – the volume control knobs are not brought out, and during the assembly process they are set so as not to cause any side overtones, even when a signal is applied with a maximum level to the input.

(For those who want to repeat – the length of the pipe turned out to be approximately 18cm)

When assembling the subwoofer, I decided to play it safe and cut an additional hole in the side to improve heat dissipation from the transformer and amplifier. As practice has shown, this was superfluous – one vent on the back of the case is enough for cooling. Class-D amplifiers have quietly made a big revolution in audio – forget about bulky heatsinks and fans, complete with huge power transformers.

The pain of choosing a place for a side hole (as practice has shown, it is superfluous)

All joints are well sealed, and the insides are pasted over with acoustic felt. It seems nothing special, but the difference is noticeable by ear.

Subwoofer in the process of drying – all screws will subsequently be removed, and sealant will be poured into the holes.

The amplifying and feeding part is located in a separate compartment isolated from the acoustic part. It consists of a class D amplifier board 2.1, on TPA3116 microcircuits, a 16 volt, 3 amp toroidal transformer and a rectifier board with 35 volt filtering capacitors – 4700uF + 2200uF. Two more 2200 microfarad capacitors are installed directly on the amplifier board (in the photo one of them had to be pulled out a little, because the transformer interfered).

The amplifier board is shown in the photo. All connectors were removed from it, power electrolytes were replaced with Rubycon YXA, op-amps were installed instead of the “regular” NE5532, proven, low-noise NE5532AN from Signetics. To be honest, the difference is not very noticeable, but if there are parts and a minute replacement, then why not?

The whole structure is mounted on stainless steel elbows and 3mm threaded pins. On the reverse side of the panel, there is a network connector, pads for connecting satellites, a ventilation grill in the same style as on the satellites.

In the photo – an attempt (unsuccessful) to wallpaper the panels using double-sided tape.

After everything is assembled, checked for normal sound and the absence of chatter, you can paste over the body with wallpaper. The option with double-sided tape did not work here – on large surfaces, the wallpaper began to make wrinkles, therefore, I had to glue it on PVA glue.

This glue is very tricky – it’s easy and pleasant to work with, it’s also easy to wash your hands, but after it dries, it’s very difficult to work with it – it turns out to be a very viscous and poorly processed mass – when pasting the sidewall, the glue went beyond the edges, I didn’t clean it in time, as a result, I got ugly protrusions on the sidewall that I had to cut off, and by that, bury the idea of ​​\u200b\u200bfull pasting with abwoofer wallpaper.

So, if you repeat my thorny path, it is better to work together – one of them drives out the excess glue with a scraper, and the other immediately cleans up these excesses with a damp cloth. And I had to “invent” false panels for the subwoofer. It turned out not as beautiful as planned, but the sub will stand under the nightstand, behind the printer, and it will practically not be visible, so it will do anyway 🙂

Finally, everything is assembled, configured, and even installed on the “workplace”. It turned out pretty nice, fresh and unusual, and the sound is generally class. Small, final touches to the sound were given by the system equalizer settings (a small dip of -3db in the range of 100-400Hz to remove room resonances), and by adjusting the level of the subwoofer relative to the satellites – I had to muffle it a little so that the sound was even, and not the classic “boom-boom, tsyk-tsyk” ohm.

In conclusion, a little advice-warning to all audiophiles, lovers of Till and Small, the BassBox program, warming up the ears and so on, who will have quite expected objections and advice about design, shapes, internals and, in general, the meaning of life. The author of this article, that is, I know about all this splendor and is generally well versed in acoustics. I worked as a sound engineer for 10 years, and mixed many different tracks, including those that later got into the Billboard TOP 20. So I have a sufficient idea of ​​​​the right sound, and the design of the entire system was calculated and selected so that in a particular room, in a particular place, to provide the most decent sound. I won’t boast much (why?), but in terms of the overall sound quality (loudness, detail, stereo panorama, bass, mids, highs), this solution corresponds to branded bookshelf acoustics with a price tag of around $300 and is head and shoulders above any Microlab / Sven / Defender / Edifier and other similar configurations.

Since the blog format does not provide for the possibility of “attaching” files, I can’t post the drawings for this reason, but if you want to repeat, write in the comments, I will send everything by mail.

And here is the topic of the next DIY review — Clock on seven-segment displays, in the same visual style as the reviewed columns, but with some unique properties — the color of the symbols changes depending on the time of day, and the control is done with gestures (for example, you can turn off the alarm clock without getting out of bed — just waving your hand)

  • * — Social networks Instagram and Facebook are owned by Meta and banned in Russia. Meta is recognized as an extremist organization in the Russian Federation.

Bar, Café and Restaurant Speakers

Sonos speakers are designed to create a pleasant ambience no matter where you place them. High-quality sound, ease of use and extensive functionality – these can be called the main laws that Sonos follows.

For centuries, people, sitting in a tavern with a glass of alcohol or enjoying a gourmet dish at a table in a restaurant, loved to listen to music. The melody differed depending on the era and geographical location of the institution.

In pre-revolutionary Russia of the late 19th and early 20th centuries, gypsy groups were popular in good restaurants. Visitors could not only taste culinary masterpieces, but also enjoy wonderful vocals, musical arrangements, and sometimes even look at a dancing tame bear.

After the Revolution, everything changed somewhat. Most of the restaurants were converted into public catering, live music was considered vulgar, corrupting, and therefore undesirable. The maximum that could be heard at that time was a gramophone record with revolutionary songs.

Live music began to return to cafes and restaurants in the 60s and 70s of the XX century. In those days, vocal and instrumental ensembles became popular, touring in several or working in one institution.

With the advent of affordable music players, many bars, cafes and restaurants have moved away from live music. It is much easier to collect a musical collection from different genres than to invite a band capable of playing the classics, Queen and Murka.

But music centers or a console with a laptop connected are not always convenient. Discs get lost, scratched, etc. You need to know how to use audio equipment, otherwise there will be more harm than good. Nobody wants dissatisfied visitors. And without music, any institution will be insipid and boring, despite the efforts of cooks and bartenders.

And yet, in spite of everything, there is equipment that does not require professional skills in handling – Sonos audio systems. In this review, we will talk about which bar columns are best suited and which system should be installed in restaurants.

Sonos Audio Systems

The hallmark of all Sonos audio systems is the ability to control all multi-room systems from a single application. Play one track to all audio systems installed in the premises or broadcast a separate song to each speaker.

Sonos wireless multi-room speakers don’t need much: an outlet, Internet access via cable or Wi-Fi. Embedded systems will need to run an audio wire and a Sonos AMP amplifier.

Bar speakers

There are different types of bars: classic drinking establishments with fatty snacks and draft foamy drinks, wine, cocktail. Each plays music that is consistent with the atmosphere of the institution. However, no matter what musical works sound, the tracks should be well audible. Sound quality affects visitors no less than the amount of alcohol consumed.

Bar speakers need to be not only loud, but also comfortable to use. For small establishments, audio systems that require minimal attention are suitable.

Sonos wireless speakers are designed for more than just home use. For example, a pair of Sonos Five speakers is enough for the main room in a bar. Six speakers deliver rich and clear sound. Visitors will be able to enjoy not only the contents of glasses and communication, but also high-quality sound.

Bars with private rooms or themed rooms should install Sonos One. Speakers of lower power compared to Five, but not inferior in sound purity. Create a playlist for each room, or give attendees access to the audio system and let them play their favorite tracks. Such a service will appeal to many customers.

Cafe speakers

Cafes, like bars, are different: a snack bar with a minimum set of dishes, a teahouse with many varieties of coffee and tea, etc. People come to such establishments for a quick meal, a cup of an invigorating and tasty drink. During the lunch break, cafeterias are visited by employees of nearby offices and students. In the evening, couples in love and single people walking around the city drop in.

Whatever cuisine is presented in the establishment, background music is needed to create the right atmosphere. It is always more pleasant to dine to a light shimmering melody than in the silence of a cemetery. Cafe speakers should work in such a way that visitors enjoy more than just food.

Café speakers are not much different from those installed in bars. The difference is that the cafeteria does not need much power. Just attach two or three Sonos One SL speakers around the perimeter to create a cozy atmosphere. Multiroom systems that adapt to the area of ​​the room, so that the owner of the establishment does not need knowledge in acoustics.

Restaurant loudspeakers

Restaurants are not only haute cuisine, rare wines and waiters in bow ties. People go to such establishments not so much for food, but for the atmosphere. While waiting for an order, the client examines the interior of the room, inhales the aromas of dishes, enjoys light music.

In the interior of establishments of this level, every detail is important: from the pattern of the flooring to the uniforms of the waiters. The quality of the acoustic systems must be appropriate, otherwise it cannot be.

On the one hand, restaurant speakers need to blend in with the interior and not stand out. On the other hand, the sound should be clear and precise. Sonos built-in acoustics will cope with this task.

In-Ceiling and In-Wall loudspeakers are installed in the ceiling and walls, so before creating the interior, you need to pay attention to where the acoustics are installed. However, after that, the audio system will delight both the owner of the restaurant and the guests.

White protective grilles are easy to paint. This allows you to hide the presence of the audio system in the hall. Light classical music will flow from everywhere, which will create a pleasant atmosphere.

Conclusion

Sonos loudspeakers are designed to create a pleasant ambience no matter where they are installed.

Jbl or sony speaker: JBL vs Sony – which one is best for you?

JBL vs Sony – which one is best for you?

If you’ve been looking for the perfect speakers or home audio equipment at any time during the last couple of decades, we’re certain that two brand names will come up again and again. JBL and Sony are giants in the space, offering a huge range of devices for both casual listeners and audiophiles alike.

Because they have both been in the game so long, it can feel like they offer similar solutions, and it can be hard to choose between them as a result. Do you want something cheap that does the job? Or something that will blow your existing home theater system out of the water? Both Sony and Bose have answers to both, but there are small details that differentiate them. 

In this guide, we will explore those differences, as well as which we would recommend based on your existing set-up and priorities. You can also head to our guide to the best surround sound systems for more comparisons.

Amazon Prime Day ’23 speaker deals

Now that you’ve read about the differences between JBL and Sony speakers, you may be interested in some of the best bargains and deals available this Amazon Prime Day. The sales event takes place over 11-12 of July, and we will be posting the best of the best right here, so bookmark this page to avoid missing out.

Sony SRS-XG300 Portable Bluetooth Speaker | was $349.99, now $198 (save 43%)

We discuss the merits of both Sony and JBL Bluetooth speakers in the guide below, but sometimes a great deal can help to sway you. We love the look of the Sony SRS-XG300 portable speaker, and it’s also a bargain with 43% off for Prime Day.

JBL Xtreme 2 | was $429.95, now $149.99 (save 65%)

JBL’s Bluetooth speakers are mega-popular for their power and versatility, but any great portable speaker can often set you back a few $$$. This amazing deal on the JBL Xtreme 2 is very welcome, then, saving you an amazing 65% on the waterproof device.

Sony HT-S400 2.1ch Soundbar | was $299.99, now $178 (save 41%)

Sony is a giant in the home audio world for good reason, so it’s great when one of its products pops up in a sales event. The Sony HT-S400 soundbar with S-Force PRO Front Surround and Dolby Digital is cheaper for a limited time, with 41% off for Prime Day.

Today’s best JBL and Sony deals

Sony HT-A5000 Soundbar

View Deal

See all prices

JBL Bar 1000

£999.99

View Deal

See all prices

JBL Boombox 3

£989.99

View Deal

See all prices

(Image credit: Anete Lusina)

JBL vs Sony: Design

On a purely aesthetic level, Sony wins out over JBL. While JBL soundbars are sleek and simple, its Bluetooth speakers are on the flashier side, with various bright color choices and rugged builds that show off their toughness against water, dust, and other nasty things. Sony, on the other hand, has a greater variety of options, with some that match JBL’s more fun look and others that offer greater style points.

(Image credit: JBL)

JBL vs Sony: Bluetooth speakers

As previously stated, JBL’s Bluetooth speakers can look a little utilitarian, and the target audience seems to be those who want to take their speakers outside of the home rather than those who want their tech to blend into the rest of their decor. That said, their offering of the best outdoor speakers is second-to-none, and the JBL Clip 4 is one of our top choices for bathroom speakers.

Sony’s range, on the other hand, ranges from the basic to the luxury, with the black and gold of the RA5000 and RA3000, in particular, showing that Bluetooth speakers can be just as attractive as any other home audio equipment. Both brands also offer what they call ‘party speakers’, which tend to be on the larger side and with additional lights.


  • Verdict: Sony’s Bluetooth speakers win out on aesthetics and range, with rugged speakers that match JBL’s alongside speakers with more of a luxury feel.

JBL Clip 4

Sony RA3000

Sony LSPX-S3 Glass Sound Speaker

(Image credit: Sony)

JBL vs Sony: Soundbars

The entry-level soundbar from Sony is the HT-S100F 2-ch Built-in Tweeter Soundbar, which currently sells for $130 at full price. If you want a soundbar with the best subwoofer included (which we recommend for the best experience), then the cheapest you will pay is £280 for the HT-S350 2.1-ch Soundbar.

At the other end of the scale, you can grab the HT-A7000 7.1.2-ch Dolby Atmos Soundbar for $1,400 (subwoofer not included) for a far more expansive sound profile and Atmos for spatial audio or the HT-Z9F 3.1-ch Dolby Atmos/ DTS:X Soundbar for $900 (subwoofer included). 

JBL, on the other hand, charges a little more for the equivalent of Sony’s HT-S100F – just under $200 for the JBL Bar 2.0 All-in-one (MK2). The Bar 2.1 Deep Bass (MK2), which adds a subwoofer to the mix, sells for $350. This is indeed pricier than Sony’s entry-level speakers, but the closest match to its rival’s top-price soundbar – the JBL Bar 1000 7.1.4-ch soundbar with Dolby Atmos/DTS:X, is cheaper at $1,200.

JBL then has an ace up its sleeve, with the Bar 1300X 11.1.4-ch soundbar selling for close to $1,700. The soundbar, along with the Bar 700, Bar 800, Bar 1000, and Bar 9. 1, all come with detachable rear speakers, turning them into basic surround sound offerings.

(Image credit: JBL)

JBL vs Sony: Home cinema

JBL has its own premium audio line in the UK that includes high-end floor-standing speakers, bookshelf speakers, in-built systems, and other components of the finest surround sound systems. Unfortunately, the full range has not found its way to the US yet, and can only be bought in-store in the UK. 

That doesn’t mean that you can’t build a system using JBL speakers, though, with the best bookshelf speakers, standalone floor-standing speakers, subwoofers, and more for you to DIY a brilliant system.

The best surround sound offering from Sony is the HT-A9 High-Performance Home Theater System, which we scored highly during testing. It doesn’t come cheap, however, priced at a premium $2,000 for four speakers and a receiver. Outside of this, you can grab various rear speakers compatible with Sony soundbars, as well as standalone subwoofers and receivers.


  • Verdict: While Sony has the brand recognition and our favorite surround sound offering in the HT-A9, we have a real soft spot for JBL’s soundbars with detachable surround speakers, allowing those with a lack of space or willing to wire together multiple devices to have a solid surround sound experience.

Sony HT-A9 Speaker System

JBL Bar 800

Sony HT-A7000

(Image credit: JBL)

JBL vs Sony: Our verdict

JBL and Sony both hold a specific place in the home audio world, and comparing them is somewhat a case of splitting hairs. However, when considering their different target audiences, commitment to sound over aesthetics and vice versa, and their options across different price points, some trends seem to emerge.

Those looking for a tough speaker that can be taken out of the house or used for outdoor parties might do better with something from JBL, but Sony has more choice when it comes to Bluetooth speakers that look good in a space. For home theater audio, Sony wins out for us with surround sound, but we count JBL’s offerings as among the best soundbars for their versatility.

JBL vs Sony – which one is best for you?

If you’ve been looking for the perfect speakers or home audio equipment at any time during the last couple of decades, we’re certain that two brand names will come up again and again. JBL and Sony are giants in the space, offering a huge range of devices for both casual listeners and audiophiles alike.

Because they have both been in the game so long, it can feel like they offer similar solutions, and it can be hard to choose between them as a result. Do you want something cheap that does the job? Or something that will blow your existing home theater system out of the water? Both Sony and Bose have answers to both, but there are small details that differentiate them. 

In this guide, we will explore those differences, as well as which we would recommend based on your existing set-up and priorities. You can also head to our guide to the best surround sound systems for more comparisons.

Amazon Prime Day ’23 speaker deals

Now that you’ve read about the differences between JBL and Sony speakers, you may be interested in some of the best bargains and deals available this Amazon Prime Day. The sales event takes place over 11-12 of July, and we will be posting the best of the best right here, so bookmark this page to avoid missing out.

Sony SRS-XG300 Portable Bluetooth Speaker | was $349.99, now $198 (save 43%)

We discuss the merits of both Sony and JBL Bluetooth speakers in the guide below, but sometimes a great deal can help to sway you. We love the look of the Sony SRS-XG300 portable speaker, and it’s also a bargain with 43% off for Prime Day.

JBL Xtreme 2 | was $429.95, now $149.99 (save 65%)

JBL’s Bluetooth speakers are mega-popular for their power and versatility, but any great portable speaker can often set you back a few $$$. This amazing deal on the JBL Xtreme 2 is very welcome, then, saving you an amazing 65% on the waterproof device.

Sony HT-S400 2.1ch Soundbar | was $299.99, now $178 (save 41%)

Sony is a giant in the home audio world for good reason, so it’s great when one of its products pops up in a sales event. The Sony HT-S400 soundbar with S-Force PRO Front Surround and Dolby Digital is cheaper for a limited time, with 41% off for Prime Day.

Today’s best JBL and Sony deals

Sony HT-A5000 Soundbar

View Deal

See all prices

JBL Bar 1000

£999.99

View Deal

See all prices

JBL Boombox 3

£989.99

View Deal

See all prices

(Image credit: Anete Lusina)

JBL vs Sony: Design

On a purely aesthetic level, Sony wins out over JBL. While JBL soundbars are sleek and simple, its Bluetooth speakers are on the flashier side, with various bright color choices and rugged builds that show off their toughness against water, dust, and other nasty things. Sony, on the other hand, has a greater variety of options, with some that match JBL’s more fun look and others that offer greater style points.

(Image credit: JBL)

JBL vs Sony: Bluetooth speakers

As previously stated, JBL’s Bluetooth speakers can look a little utilitarian, and the target audience seems to be those who want to take their speakers outside of the home rather than those who want their tech to blend into the rest of their decor. That said, their offering of the best outdoor speakers is second-to-none, and the JBL Clip 4 is one of our top choices for bathroom speakers.

Sony’s range, on the other hand, ranges from the basic to the luxury, with the black and gold of the RA5000 and RA3000, in particular, showing that Bluetooth speakers can be just as attractive as any other home audio equipment. Both brands also offer what they call ‘party speakers’, which tend to be on the larger side and with additional lights.


  • Verdict: Sony’s Bluetooth speakers win out on aesthetics and range, with rugged speakers that match JBL’s alongside speakers with more of a luxury feel.

JBL Clip 4

Sony RA3000

Sony LSPX-S3 Glass Sound Speaker

(Image credit: Sony)

JBL vs Sony: Soundbars

The entry-level soundbar from Sony is the HT-S100F 2-ch Built-in Tweeter Soundbar, which currently sells for $130 at full price. If you want a soundbar with the best subwoofer included (which we recommend for the best experience), then the cheapest you will pay is £280 for the HT-S350 2.1-ch Soundbar.

At the other end of the scale, you can grab the HT-A7000 7.1.2-ch Dolby Atmos Soundbar for $1,400 (subwoofer not included) for a far more expansive sound profile and Atmos for spatial audio or the HT-Z9F 3.1-ch Dolby Atmos/ DTS:X Soundbar for $900 (subwoofer included). 

JBL, on the other hand, charges a little more for the equivalent of Sony’s HT-S100F – just under $200 for the JBL Bar 2.0 All-in-one (MK2). The Bar 2.1 Deep Bass (MK2), which adds a subwoofer to the mix, sells for $350. This is indeed pricier than Sony’s entry-level speakers, but the closest match to its rival’s top-price soundbar – the JBL Bar 1000 7.1.4-ch soundbar with Dolby Atmos/DTS:X, is cheaper at $1,200.

JBL then has an ace up its sleeve, with the Bar 1300X 11.1.4-ch soundbar selling for close to $1,700. The soundbar, along with the Bar 700, Bar 800, Bar 1000, and Bar 9.1, all come with detachable rear speakers, turning them into basic surround sound offerings.

(Image credit: JBL)

JBL vs Sony: Home cinema

JBL has its own premium audio line in the UK that includes high-end floor-standing speakers, bookshelf speakers, in-built systems, and other components of the finest surround sound systems. Unfortunately, the full range has not found its way to the US yet, and can only be bought in-store in the UK. 

That doesn’t mean that you can’t build a system using JBL speakers, though, with the best bookshelf speakers, standalone floor-standing speakers, subwoofers, and more for you to DIY a brilliant system.

The best surround sound offering from Sony is the HT-A9 High-Performance Home Theater System, which we scored highly during testing. It doesn’t come cheap, however, priced at a premium $2,000 for four speakers and a receiver. Outside of this, you can grab various rear speakers compatible with Sony soundbars, as well as standalone subwoofers and receivers.


  • Verdict: While Sony has the brand recognition and our favorite surround sound offering in the HT-A9, we have a real soft spot for JBL’s soundbars with detachable surround speakers, allowing those with a lack of space or willing to wire together multiple devices to have a solid surround sound experience.

Sony HT-A9 Speaker System

JBL Bar 800

Sony HT-A7000

(Image credit: JBL)

JBL vs Sony: Our verdict

JBL and Sony both hold a specific place in the home audio world, and comparing them is somewhat a case of splitting hairs. However, when considering their different target audiences, commitment to sound over aesthetics and vice versa, and their options across different price points, some trends seem to emerge.

Those looking for a tough speaker that can be taken out of the house or used for outdoor parties might do better with something from JBL, but Sony has more choice when it comes to Bluetooth speakers that look good in a space. For home theater audio, Sony wins out for us with surround sound, but we count JBL’s offerings as among the best soundbars for their versatility.

PORTABLE SPEAKER SONY SRS-XB43 Blue OR JBL Charge 3 Gray – review, comparison

We announce the start of a review of two popular wireless speakers from Sony and Jibiel. Which model will be better in terms of main parameters: SRS-XB43 Blue or Charge 3 Gray? Read, compare, choose.

Useful info: What are portable speakers – how to choose a portable speaker according to 11 parameters The control buttons are located on a neat rubber strip at the top of the device.

LED side lighting. In addition to it, in the active state, the speakers also glow. Connectors are hidden on the back of the case under a rubber cap.

Sony SRS-XB43 Blue, although portable, weighs almost 3 kg. But it thoroughly added power, and in terms of sound it is one of the loudest among the latest Sony acoustic developments.

Sound

The manufacturer promises super-developed basses and vocals that are not inferior to them in quality. The sound design of a portable speaker is built according to the scheme:

  • left and right passives,
  • middle 2 woofers,
  • on the sides of them are tweeters for transmitting high frequencies.

The “Extra Bass” technology is used to work out the lower range of sounding tracks. Double passives allow you to listen to powerful bass.

LIVE SOUND mode can be activated. Then the column will turn on the propagation of the sound wave over a wider area. Music can be heard well even in the remote corners of a large room or on the street.

The SRS-XB43 uses rectangular cones. Thanks to this form, the bass has become more powerful, the middle of the composition does not “fall through”, and the vocals are even more clear and natural. The diffuser is covered with a special mica that reinforces the speaker. This gives music lovers a clear sound at maximum volume.

Power

The built-in battery allows you to listen to music without interruption and recharging the speaker for about a day. But with the “Extra Bass” + backlight turned on, you can count on 14 hours of operation without additional recharge.

Charging a music device is as simple as possible.

  1. We take the adapter from the kit.
  2. Insert one end of the USB Type-C cable into the corresponding connector on the speaker.
  3. We connect the charging block to the socket.

Charging will be completed in ≈ 5 hours. The power supply time depends on the degree of “depletion” of the battery.

The speaker is also equipped with a standard usb connector, to which you can connect a smart phone to charge the battery.

Charging details are described here: 2 effective ways to properly charge your portable speaker 0008

If you activate the Party Connect option, you can connect up to 100 pieces to the device. other columns. Full synchronization is available not only for tracks, but also for lighting;

  • NFC

A small circle with a corresponding inscription on the case says that the device can be paired with other gadgets that support NFS with one touch.

The SRS-XB43 can also be connected via wires. To do this, the column provides USB-C, USB-A and 3.5 mm mini-jack connectors.

Waterproof

The device is resistant to moisture and dust. The specifications indicate the protection standard IP67. This means that the column will withstand immersion to a depth of 1 meter for 30 minutes or less without loss of functionality.

SRS-XB43 can be taken to the beach, used by the pool, even washed when needed to clean the fabric surface. The device is not afraid of drops, sand, and other contaminants.

The only thing is to make sure that the rubber plug tightly closes the connectors. This is important to ensure that the device is completely waterproof and dustproof.

Accessories

The forty-third SRS-XB can be used in both horizontal and vertical positions. Set up the column as you like.

One of the main features of the model is the presence of multi-colored illumination. Moreover, 2 LED strips on the sides of the device do not just glow, they, together with the speakers, pulsate, shimmer and light up in turn or all together to the rhythm of the music.

By installing the Music Center and Fiestable smart apps, you can play around with the sound and backlight settings. The latest program allows you to use gestures on the smart screen to control audio playback and lighting effects.

The “hands-free” function allows you to receive calls and carry on a conversation using the speaker without holding the smart phone in your hands. True, without the use of headphones, negotiations will be heard not only by you, but also by others.

JBL Charge 3 Gray

An 800-gram model in a recognizable neat barrel design. The case is sheathed in a tactilely pleasant woven material, rubberized plastic is used for individual elements. On the sides there are 2 radiators with the JBL logo. You can use the column even in a horizontal, even in a vertical orientation: there are “legs” both below and on the sides.

Control buttons on top:

  • bluetooth;
  • volume control;
  • synchronization with other brand speakers;
  • playback control (play/pause).

Buttons are convex and easy to find even in low ambient light. The ports at the back are covered with a massive plug. The 5-position charge indicator is located at the top of the column footboard.

Sound

The sound in Charge Three is on par, well balanced. High quality sound is provided by two 50 mm speakers with a total power of 20 watts.

On both sides of the body are passives that are responsible for the output of rich bass, which also vibrate to the music.

Model “Jibiel” sounds with a solid volume and has a serious margin of volume. Low and high frequencies are played well even at high volume.

Suitable for listening to tracks both indoors and outdoors.

For review: Top 6 best JBL portable speakers – JBL portable speakers rating Charging time is ≈ 4.5 hours. After that, the speaker will be able to play up to 20 hours without recharging.

Third Charge comes with a microUSB charging cable and a power supply + 2 interchangeable plugs for English and Euro sockets.

The column can be used as a power bank and energize the smart battery, for example, on the road. Six thousand mAh is enough for 2 full charges of an average mobile phone. Gadgets connect with each other using a USB cable.

Connection

You can use both wireless and wired connection with the speaker. In the first case, you need Bluetooth. The Charge 3 uses version 4.1. Bluetooth connects other JBL speakers and up to three devices from which you can start the Mouzon. Let’s say three smart phones or tablets.

In the second, connectors:

  • mini-jack for headphones, etc.;
  • micro usb for charging;
  • USB to output current to smart.

Step-by-step manual: How to connect a bluetooth speaker to your phone: 2 proven options for 2 OS

Water resistance

Thanks to the rubberized shell, you can listen to your favorite tracks on the speaker even in wet weather, in rain or snow. The device is not afraid of getting wet or dirty.

Charge 3 is IPX7 waterproof and dustproof. The musical “barrel” can be placed near water sources (sea, swimming pool, etc. ), briefly submerged under water (up to 30 minutes and not deeper than 1 meter). Before doing this, do not forget to close the rubber plug tightly so that moisture does not damage the device connectors.

By the way, the column does not sink, but easily floats to the surface. So if you accidentally fall into the river, you can easily “rescue” it without diving under water.

Additional features

What else “Charge 3” will please users:

The presence of a microphone – thanks to noise and echo cancellation, clear sound is provided during phone calls.

Support for JBL Connect – you need to install an application with the same name on your smart phone, and you can combine several speakers into one music system without wires and troubles.
The ability to connect several gadgets from which you can output tracks in turn. Convenient if you have a group of friends and want to listen to music from different playlists.

That’s it. We end the comparison with conclusions. Let us recall the main parameters of the two competing speakers:

Models of the two brands came to the finish line on an equal footing. They are not inferior to each other either in sound quality, or in autonomy, or in the protection of the body from water. The price tag is also about the same. Each option boasts its own features, such as the backlight from Sony or the power bank column from JBL. Therefore, everyone makes a choice for himself: what design do you like more, what chips are needed, and what can you do without.

For those who want to save money: Rating of budget portable speakers under 1500 UAH: top 10

Free STL file JBL, Sony 0010

Best 3D Printer Files in Home Category

Hanging sign of the sun

0.98 €

Maze Coaster

Free

magazine lip replacement for Beretta ASG M9 Gas Blow Back Full Metal airsoft gun

Free

Controller holder Leshen

15 €

Monkey Minions Keychain / Magnets

Free

Arduino Word Clock – 3D Printable

Free

Draped bird feeder

2,73 €

Fruit&Veg Cutter

Free

Bestsellers in the Home category

Puke Emoji Floating Pencil Holder

2 €

Elephant head wine stand


€5. 51

-thirty%

3.86 €

Birdhouse Surf Shop – no supports needed/two sizes and compatible with Prusa Mini

4.02 €

Pencil cup

1 €

Bread bag clip – seal in place – fidget spring toy

€0.90

Wine bottle holder “Dragon”

2,27 €

Wall shelf “Jamor mushroom”

2,60 €

Wall shelf “Amanita mushroom”

2,60 €

GARDEN FAIRY HOUSE – CARROT! – 100% WITHOUT SUPPORT

2.03 €

Dragon box, heart box

1.59 €

CUTE FAIRY HOUSE V6 – BELL PEPPER!!! Support not required

2. 03 €

V4+V6+V8+V12+V16+ COOLER BUNDLE FOR STANDARD AND MINI CANS / FITS MOST PRINTERS


€8.16

-20%

6.52€

Container for pistachio egg whites with double bottom for shell

2 €

Bordeaux, Octopus

13.63 €

Dragon Can Koozie, holder for 12 lb can

1.82 €

Wall shelf “Ostrea Fungus”

2,60 €



💖
Do you want to support Cults?

Do you like Cults and want to help us continue our journey on our own ? Please note that we are a small team of 3 people, so it is very easy to support us in maintaining activities and creating future developments.

Soundbar speaker: Best Home Audio Sound Bars

Ikea Symfonisk Bookshelf Wi-Fi Speaker review: Ikea speaker makes Sonos multiroom magic more affordable

Ikea is known for functional, affordable furniture. Sonos is known for easy-to-use, but not necessarily affordable, wireless multiroom speakers. In the Symfonisk Bookshelf the twain shall meet, and the result is the lowest price on a Sonos-compatible
Wi-Fi
speaker yet. And it also sounds good as anybody can expect for a $99 (£99) speaker.

No, it’s not nearly as cool as the $179 (£150) Ikea Symfonisk Table Lamp, which combines a speaker with an attractive, functional light fixture. The Bookshelf is simply a versatile multiroom Wi-Fi speaker that offers similar levels of Sonos-based utility, while cutting the price in half.

The Bookshelf sounds very similar to the Lamp, though with less bass, and its price makes it a great option for a kid’s system or paired as set of rears for the Sonos Beam, Playbar or Playbase. It takes the Sonos ecosystem to a place it’s never been before: multiroom music for less than $100.

(Bass) note to shelf

The Symfonisk Table Lamp and Bookshelf.

Sarah Tew/CNET

The Symfonisk Bookshelf is not shaped like your typical powered speaker. It’s tall and thin instead of squat, measuring a foot tall, 4 inches wide and 6 inches deep. It includes a removable woolen grille that hides a single mid-bass driver and a soft-dome tweeter. The front hosts physical Play and Volume buttons while the rear only offers a backup Ethernet port, in case you don’t want to use Wi-Fi.

Sarah Tew/CNET

The Symfonisk is designed to be mounted on the wall, that’s where the “shelf” part comes in — the speaker itself is able to hold up to 6.6 pounds. Its rubber grommets on the outside help reduce vibration and stop things you put on it from sliding off. The wall-mount bracket allowing it to function as a shelf isn’t included in the box, instead it’s available as a $20 extra.

The Symfonisk Bookshelf is fully compatible with the Sonos multiroom system, and like other Sonos products it doesn’t have
Bluetooth
streaming. It can be controlled either with the Sonos app, a third-party streaming service such as Spotify Connect, or with a voice assistant such as
Amazon
Alexa, Google Assistant or
Apple’s
Siri. Apple AirPlay 2 compatibility means that the Bookshelf could also make an affordable multiroom partner with the Apple HomePod. Like other Sonos speakers, two Bookshelves can be paired in stereo or used as rears for the Sonos Beam.

The Bookshelf lacks an onboard microphone, which is not surprising for the money, but if you want to make the Symfonisk “smarter” you can add an Echo Dot or Google Home Mini.

Setup

Sarah Tew/CNET

The Ikea Symfonisk is compatible with the Sonos Trueplay calibration system, but depending on your room the results may vary. Thankfully if you don’t like the resulting sound the Sonos app offers the ability to toggle Trueplay calibration on and off so you can compare them.

I used the Bookshelf in a variety of ways including as a single unit, in stereo and as rears for three different
sound bars
. While the rear speaker option was the best, the other configurations offered their own charms. Each required its own setup, and each time I had to hold the controls on the front down quite hard, while steadying it with my other hand, to get the speakers to register.

I used the Bookshelves as a pair of rears for the Sonos Playbar and Sub combo first, and chose to use a manual setup followed by a Trueplay touch-up. It took a little bit of tweaking in the Advanced Audio menu to get the blend between the sub, the bar and the rears right. But once I did the Shelves blended right in.

How does it sound?

The Symfonisk range offers its own sound that’s similar to the excellent $200 Sonos One smart speaker, with a few differences. The One has a slightly recessed midrange while the Symfonisk Bookshelf and Lamp are a little more open sounding, though less refined.

As a single speaker I found that the Bookshelf is brighter than the One, and comparatively lacking in bass. The midrange is expressive though a little ragged with brighter recordings, but it sounds better than a wireless speaker at this price should. As a background speaker it works great, and I could imagine bookshops or coffee shops gravitating toward the Shelf as a way to play music for their customers.

As a stereo pair the Symfonisk wasn’t as convincing as a single Sonos One, and the channels could occasionally drop out or go out of sync just enough to create a confused stereo image. When it snapped into focus, however, it offered an enjoyable musical experience.

As a stereo pair the Symfonisk wasn’t as convincing as a single Sonos One.

Sarah Tew/CNET

In comparison the
Sonos One
 as a stereo pair was simply superb (as I’d expect at $400 total for both speakers). It was rock solid, and refined. The stereo Ones made Sleater Kinney’s glitchy The Center Won’t Hold more listenable than either the Symfonisk Bookshelf pair or even the Sonos Playbar. The Ones ensured the song had plenty of drive, especially during the last minute when the full band kicked in. Corin Tucker’s voice was planted dead center while it was a little too wishy-washy with the Shelfs.

But it was when used as a pair of surrounds that the Bookshelf truly shone. Paired with the Sonos Playbar the speakers disappeared and the jungles of Avatar’s Pandora filled the CNET listening room to the brim. Here the slightly out-of-phase nature didn’t matter as I was focused on the screen at all times. Surround steering was some of the best I’d heard from a Sonos setup. For Sonos sound bar users seeking rear surround speakers, $200 for a pair of Bookshelfs makes much more sense than a pair of Ones for twice the price.

Should you buy it?

The Symfonisk Bookshelf may not be the best Sonos speaker, but it is the cheapest and the one with the most utility. It can be a standalone speaker, it can form the basis of a stereo system or it can be a pair of rears — all for less than the cheapest Sonos-branded speaker.

If you have a Sonos sound bar then you should speed, not perambulate, to your nearest Ikea store for a pair of these. They will add a level of immersion to your movies that you’ve never had  before — they are perfectly suited to being second-fiddle to a sound bar.

Otherwise the Bookshelf is great for a cheap way to get sound into smaller rooms, and the option to add another speaker later only enhances its appeal.

Creative Stage review: Crazy-cheap sound bar is good for small TVs, great for desktops

Computer speakers = terrible. $80 computer speakers = still pretty terrible. Right?

Creative’s excellent 2.1-channel system, the Stage, begs to differ. This stylish 
sound bar
delivers a compelling mix of sound quality and features — including HDMI and a subwoofer — at an ultra-affordable price. It achieves something Creative has strived for over the last 20 years: to transcend the PC and enter the living room. 

In other words, it’s also great for smaller rooms and TVs if you’re on a tight budget. Its sound will trounce the built-in speakers of just about any TV.

That said, it’s better as a PC desktop or gaming system than a TV sound bar due to its tiny size. I found it difficult to tell left from right when sitting on the couch, and I only felt the full brunt of the small sub when it was placed at my feet. If you’re looking to supplement your TV sound and have the space for it, the Vizio SB3621 is worth the extra money over the Stage.

The stage is set

Sound bars like the excellent Vizio SB362An-F6 have drawn the map for sound bars under $100: it should have
Bluetooth
, an optical input and an internal subwoofer. 

The Creative Stage not only lights this map on fire but then eats the smoldering map bits. The sound bar includes both a separate subwoofer and an HDMI ARC input.

Sarah Tew/CNET

Connections also extend into the obligatory Bluetooth wireless and an optical input, and Creative throws in a USB port for playing MP3s from an external drive. Though it still betrays its desktop roots, the Stage is unlike similar multimedia systems in that it won’t act as a USB sound card — you’ll still need to use an auxiliary output from your computer.

This is a very compact system. The sound bar is 21 inches across, but it doesn’t look out of place with large screens, due to its likable industrial design. And unlike the inscrutable dots of the
Vizio
, the Creative has a two-symbol display that makes selecting the input a breeze.

Sarah Tew/CNET

Like the sound bar the 40-watt subwoofer is small;  at 18 inches tall,  it’s the size of slimline desktop PC. At this price you can’t expect wireless connectivity and it’s tethered by an 8-foot cable that enables the sub to sit at your feet or by the TV.

The system comes with a comprehensive remote control, which includes four sound modes and independent volume of the sub. If you lose the remote, there is a three-button panel on the side of the sound bar. If you tap the power button it changes the input.

Let the players play

When I hooked the Creative up, I wasn’t prepared for the amount of competition it was going to give the $100 Vizio SB362An-F6. The Creative’s separate sub, which the Vizio lacks, really helps bring out the best in movies and
video games
. It may not be the most articulate model, but it’s relatively deep.

I started with a few albums though — from early, obscure David Bowie to modern pop and  rock. I quickly confirmed the Vizio is more engaging for music. It unravels the music in a better way — it teased out the brass section in Blur’s Country House — and the sound is bigger. When heard from the couch the Creative is all vocals and mostly mono. It did have a better bass kick from the sub, though. The Creative ensured the bass line of The Lemonheads’ Straight To You sounded like it was being played on a bass guitar — a difficult feat for a compact speaker. Switching to the Vizio showed that there were also other instruments in there — a snare and an ethereal, barely feeding-back guitar. It was still not an engaging song from either speaker but it was a bit more fleshed out by the Vizio.

The Creative gives Spoon’s Hot Thoughts the bass slam it missed on the Vizio, but as the song progressed the competitor gained ground. The last few seconds of the song can fill the room with swirling sound — as it does with the Vizio, but it just sounds muddled on the Creative.

Sarah Tew/CNET

Given Creative’s PC origins, it’s not too difficult to tell that this system is designed to perform at its best as part of a desktop system. It goes plenty loud enough for near-field listening and there’s a better stereo image at three versus six feet.

I played some Apex Legends and found this Creative system — when set to gaming — was able to keep up with the gunfire, explosions and spatial cues without folding into a hard ball of distortion. If you share walls or floors with neighbors you might want to turn the bass down, though. At -3 it was pretty much perfect. In contrast, when the Vizio was awkwardly balanced in the same position under our monitor, the sound bar couldn’t compete. It’s too wide for gaming like this and there were not enough positional queues or “feel it in your gut” explosions.

Sarah Tew/CNET

The Vizio is great at music, but it is outclassed by the Creative when it comes to movies. The Vizio lacked the dynamic punch of the creative in Chapter 9 of Rampage — it sounded a little flat. The sub sounded best when it was placed nearby the listening position, though it’s thwarted by that that captive lead. While it’s a perfect length for going under a desk, it’s not long enough to rattle your trousers alongside the coach.

So the Creative does well against a system without a sound bar, but how about some tougher competition? The “king of budget sound bars,” the Vizio SB3621, is now available for a ridiculously low $100. Put on your big kid pants, Creative, this is gonna get interesting.

The Vizio sounded more confident with Ready Player One. It could go much louder without losing control, and its sub was able to shake the room in a way that the Creative just couldn’t. At 1:33:40, the bombardment of the Orb of Osuvox buzzed and boomed, with each projectile sizzling across the sound stage. The supporting dialog was clear and I found the Vizio simply more involving overall than the Creative.

Should you buy it?

Creative has tried sound bars before, but either they were too ostentatious (Katana) or prohibitively pricey (Sonic Carrier). The Stage achieves the perfect balance of price, features, design and performance. 

If you’re a PC gamer on a budget and want to make every penny count, get this. For TV watchers it’s less clear-cut. If you have the choice between the Stage and the Vizio SB3621 at the same price, get the Vizio. It may not have all the features, but it sounds better and caters more ably to volume needs of a living room. 

Speaker JBL JBLBAR20AIOBLKEP Compact 2.0

15 499 ₽

Buy

Speaker JBL JBLBAR20AIOBLKEP Compact 2.0 – channel soundbar (15 499 ₽) added to cart

continue shoppingcart checkout

Speaker J BL JBLBAR20AIOBLKEP Compact 2.0 Channel Soundbar

Manufacturer

JBL

37 099 ₽

Buy

Soundbar Samsung HW-Q600B/EN 3.1.2 200W+160W black (37 099 ₽) added to cart

continue shoppingadd to cartcheckout

Apply for a loan

Samsung Soundbar HW-Q600B/EN 3.1.2 200W+160W black

Available from 7 stores in stock

53 999 ₽

Buy

Soundbar Samsung HW-Q700B/EN 3. 1.2 160W+160W black (53 999 ₽) added to cart

continue shoppingto cartcheckout

Apply for a loan

Soundbar Samsung HW-Q700B/EN 3.1.2 160W+160W black

Available from stock in 7 stores

30 499 ₽

Buy

Soundbar Samsung HW-B550/EN 2.1 410W+220W black (30 499 ₽) added to cart

continue shoppingadd to cartcheckout

Apply for a loan

Samsung Soundbar HW-B550/EN 2.1 410W+220W black

Available from 7 stores in stock

31 899 ₽

Buy

Soundbar Samsung MX-ST40B/EN 2.0 160W black (31 899 ₽) added to cart

continue shoppingadd to cartcheckout

Apply for a loan

Samsung Soundbar MX-ST40B/EN 2.0 160W black

Available from 7 stores in stock

31 899 ₽

Buy

Soundbar Samsung HW-Q60B/EN 3.1.2 340W black (31 899 ₽) added to cart

continue shopping to cart checkout

Apply for a loan

Soundbar Samsung HW-Q60B/EN 3. 1.2 340W black

Available from stock in 7 stores

40 599 ₽

Buy

Soundbar Samsung MX-ST50B/EN 2.0 240W black (40 599 ₽) added to cart

continue shopping to cart checkout

Apply for a loan

Samsung Soundbar MX-ST50B/EN 2.0 240W black

Available from 7 stores in stock

79 599 ₽

Buy

Soundbar LG S90QY 5.1.3 570W+220W black (79599 ₽) added to cart

continue shoppingadd to cartcheckout

Apply for a loan

Soundbar LG S90QY 5.1.3 570W+220W black

Available from 7 stores in stock

70 799 ₽

Buy

Soundbar LG S80QR 5.1.3 620W+220W black (70 799 ₽) added to cart

continue shoppingto cartcheckout

Apply for a loan

Soundbar LG S80QR 5.1.3 620W+220W black

Available from stock in 7 stores

48 799 ₽

Buy

Soundbar Hisense U5120G 510W+180W black (48 799 ₽) added to cart

continue shoppingto cartcheckout

Apply for a loan

Soundbar Hisense U5120G 510W+180W black

Available from 7 stores in stock

103 699 ₽

Buy

Soundbar JBL Bar 9. 1 5.1.4 820W black (103 699 ₽) added to cart

continue shoppingadd to cartcheckout

Apply for a loan

JBL Bar 9.1 5.1.4 820W black

Available from 7 stores in stock

40 599 ₽

Buy

Soundbar JBL Bar 2.1 2.1 100W+200W black (40 599 ₽) added to cart

continue shoppingadd to cartcheckout

Apply for a loan

Soundbar JBL Bar 2.1 2.1 100W+200W black

Available from stock in 7 stores

30 799 ₽

Buy

Soundbar LG S65Q (30 799 ₽) added to cart

continue shoppingadd to cartcheckout

Apply for a loan

LG S65Q Soundbar

Available from 7 stores in stock

Soundbar for TV in Miass: 506 products: free shipping, discount-59% [link]

Affiliate programHelp

Miass

Catalog

Product Catalog

Clothing and footwear

Clothing and footwear

Building materials

Building materials

Textile and leather

Textile and leather

Health and beauty

Health and beauty

Baby goods

Children’s goods

Food and drink

Food and drink

Electrical engineering

Electrical engineering

Home and garden

Home and garden

Agriculture

Agriculture

Furniture and interior

Furniture and interior

Industry

Industry

All categories 900 03

LoginFavorites

-50%

2 770

5540

Grim Bear Cartoon Car Bluetooth Speaker Wireless Portable Subwoofer TWS S. .. panel center

DETAILS

-50%

969

1938

LSM 4D Surround soundbar wired and wireless, Bluetooth 5.0, stereo subwoofer, 902 74 sound panel for laptop, PC, home cinema, TV ,

DETAILS

-40%

13 167

21945

Home cinema 5.1 TV Sound bar detachable Bluetooth speakers audio echo wall sound panels panels with 3D surround subwoofer bass boost box

DETAILS

-30%

4 376

6251

Soundbar HiFi Wireless Bluetooth Speakers 40W 3D Surround Stereo Subwoofer for TV Home Theater System sound panel panel for films RAC

DETAILS

-30%

4 376

6251

9000 2 Soundbar HiFi Wireless Bluetooth Speakers 40W 3D Surround Stereo Subwoofer for TV home theater system sound panel for movies RAC

DETAILS

Toslink digital optical audio cable SPDIF coaxial cable 9 0274 for SONY Home Cinema, Spearker Cable, Sound Panel , TV , Xbox, player

DETAILS

-52%

4 841

10028

Home theater soundbar, subwoofer, sound bar panel surround sound / Bluetooth RGB wireless speaker / sound bar bar TV computer / echo wall strip with TF card AUX (550mm + bluetooth 5. 0)

9000 6 DETAILS

21 815

Home cinema 5.1 TV Soundbar detachable Bluetooth speakers audio echo wall sound panels with 3D surround subwoofer bass boost box

DETAILS

-40%

3 899

6498

Bluetooth 5.0 Home Cinema, Wireless Subwoofer, Boombox, TV , Sound panel , stereo, wall-mounted Echo, new users,

DETAILS

-38%

763

1231

Portable USB speaker for computer, speaker for PC, universal mini 9027 4 sound panel , stereo sound for TV / laptop / computer, Plug And Play

DETAILS

-33%

611

917

90 002 HIFI 5 1 Digital SPDIF Toslink Fiber Optic Audio Cable 1m for TV -set-top boxes PS4 speaker wire sound panel amplifier subwoofer

sound Panel for TV, Wired Wireless Bluetooth Compatible Sound Panel Panel Surround for PC, TV , Outdoor Speaker

DETAILS HER

-27%

4,806

6584

TV -Computer Bluetooth Speaker Home Theater Audio HiFi Stereo Remote Control Sound Panel Wireless Subwoofer Music Center

DETAILS

Dual Bass Wireless Bluetooth Speaker HIFI Stereo Parlante TF Card AUX for Smartphones TV Sound Panel PC NFC for iPhone, Samsung

TV Panel

Portable USB Speaker for Computer, Speaker for PC, Universal Mini Sound Panel , Stereo Sound for TV 9027 5 /laptop/computer, plug and play

DETAILS

Portable USB speaker for computer, speaker for PC, universal mini sound bar panel , stereo sound for 9027 4 TV /laptop/computer, Plug And Play

DETAILS

Sound Panel for TV 20W Wired & Wireless Bluetooth Compatible Home Surround Sound Panel for PC, theater, TV – speaker

DETAILS

27 727

Samtromic Android TV Box PC home K TV mini karaoke echo mixer system digital sound panel 9 0275 singing machine + 2 wireless microphones

DETAILS

Soundbar, Powerful Sound Panel Bluetooth, Sound Panel TV , HIFI Speaker, 40×5. 5x6cm

MORE DETAILS

Wireless USB Desk Bluetooth Speaker sound panel panel with night light alarm FM temperature for PC TV computer home white

DETAILS

A4 6W RGB USB Wired sound 90 274 ​​panel PC Home theater TV Stereo surround speaker

MORE DETAILS

Home Cinema, TV Sound Bar Subwoofer Speaker Wireless Sound Bar Panel Bluetooth Home Theater System, 550MM

DETAILS

Wireless Bluetooth Speaker, 6D Surround Soundbar, Large Digital Display, Stereo Subwoofer, Computer Sound Bar for Laptop, PC, TV . wireless speaker / bluetooth soundbar jda-2006. Features: 2*10W dual horn full range

DETAILS

Portable USB speaker for computer, speaker for PC, universal mini sound panel , stereo sound for TV /laptop/computer, Plug And Play

DETAILS

Remote control for Samsung AH59-02758A HW- M550/Z HW-M360/ZA HW-M370/ZA HW-M430/ZA TV sound panel

DETAILS

22 511

5. 1 speaker system for home theater, sound panel for TV and home theater wireless speaker s

DETAILS

35 782

Ipremium new sound panel Bluetooth Home theater 5.1/3.0 wireless speaker Column 9 0274 TV box with karaoke system microphone remote

READ MORE

-31%

205

296

SPDIF Optical Cable, Digital Audio Optical Fiber Cable to SONY, Cable to home theater, sound panel , TV , Xbox, player, cable

DETAILS

-52%

3 854

7983

Home theater, TV Soundbar Subwoofer Speaker Wireless sound Panel Bluetooth Home Theater System, 550MM

DETAILS

-8%

27 032

29383

Museeq Som Bluetooth 2.4G Wireless Home Cinema, wireless sound panel panel with subwoofer for TV , sound panel panel , home system

DETAILS

1 3 388

Home theater, TV soundbar, plug-in Bluetooth speakers, audio 2. 1, wall mounted sound bar bar Echo with subwoofer, bass boost, sound bar bar

DETAILS

Portable USB Speaker for computer, speaker for PC, universal mini sound bar panel , stereo sound for TV /laptop/computer, Plug and Play

DETAILS 9000 3

Home theater, Bluetooth speaker, music box, TV , computer sound panel , wall-mounted sound box, Hi-Fi stereo subwoofer, system

DETAILS

40 030

Acoustic system for home theater 7.1ch sound panel for TV and home theater Wireless BT sound panel

UNDER ROBNE

-52%

3,066

6388

Sound panel with remote control and LED lighting, sound panel panel 20W for home theater, fit for TV , games, PC,

DETAILS

-50%

1 389

2778

TODN audio cable plug 75 ohm Premium SPDIF coa axial RCA cable for audio panel CD DVD digital TV

DETAILS

-31%

1 226

1777

0274 TV – Speaker, Bluetooth 5. 0, PC, Cinema, Optional Wired Wireless Stereo System for Home

DETAILS

-28%

2971

4127

40W HiFi Soundbar for TV Wireless Bluetooth Din Amiki Soundbar 3D Surround Stereo Subwoofer for TV Home Theater Sound Panel

DETAILS

-15%

1 770

2082

, acoustic system, TV , home theater, soundbar, subwoofer

DETAILS

Home theater Portable wireless bluetooth speaker for computer TV phone stereo low artillery USB sound panel 90 275 bluetooth 4.0

DETAILS

-70 %

8 330

27766

Xiaomi Mi TV Wireless Speaker Home Theater Original Sound Panel SPDIF Optical Sound Panel Panel Aux Support TV Xiaomi/Samsung

DETAILS

-65%

8 997

25706 900 03

sound system for BOMAKER home cinema 120 W, sound panel 2. 0, TV Bluetooth Speaker with Optical AUX 3D Dolby Support Panel

DETAILS

-45%

3 255

5918

TV sound bar panel computer speakers Soundbar stereo Bass Subwoofer AUX surround box for PC laptop tablet barra de sonido para TV 2022

DETAILS

-59% 9 0003

1 393

3397

New sonic panel with subwoofer, Bluetooth speaker for TV , bass, 3D stereo surround sound for home theater, sound box

READ MORE

-30%

735

1050

Optical Audio Cable Digital Fiber Optic Cable Coaxial Cable for Acoustic Amplifier Player PS5 Audio panel cable for TV audio

DETAILS

– 32%

1 492

2194

Home theater, sound bar panel , TV Echo Wall, Bluetooth wireless speaker, subwoofer for computer, music system, central sound

DETAILS

-40%

2 552

4253

Sound New panel for TV, Wired and Wireless Bluetooth Speaker 40W 20W for home theater, TV cinema, 2021

DETAILS

-24%

504

663

New original N2 QBYB000024 N2QAYB000715 for Panasonic, sound touch panel , TV controller for N2QBYB000026 N2QBYB000027 N2QBYB000028

POD MORE

Portable USB speaker for computer, speaker for PC, universal mini audio panel , stereo sound for TV /laptop/computer, Plug And Play

DETAILS

24 387

Good price, wireless BT control system 5.

Jbl or sony speaker: JBL vs Sony – which one is best for you?

JBL vs Sony – which one is best for you?

If you’ve been looking for the perfect speakers or home audio equipment at any time during the last couple of decades, we’re certain that two brand names will come up again and again. JBL and Sony are giants in the space, offering a huge range of devices for both casual listeners and audiophiles alike.

Because they have both been in the game so long, it can feel like they offer similar solutions, and it can be hard to choose between them as a result. Do you want something cheap that does the job? Or something that will blow your existing home theater system out of the water? Both Sony and Bose have answers to both, but there are small details that differentiate them. 

In this guide, we will explore those differences, as well as which we would recommend based on your existing set-up and priorities. You can also head to our guide to the best surround sound systems for more comparisons.

Amazon Prime Day ’23 speaker deals

Now that you’ve read about the differences between JBL and Sony speakers, you may be interested in some of the best bargains and deals available this Amazon Prime Day. The sales event takes place over 11-12 of July, and we will be posting the best of the best right here, so bookmark this page to avoid missing out.

Sony SRS-XG300 Portable Bluetooth Speaker | was $349.99, now $198 (save 43%)

We discuss the merits of both Sony and JBL Bluetooth speakers in the guide below, but sometimes a great deal can help to sway you. We love the look of the Sony SRS-XG300 portable speaker, and it’s also a bargain with 43% off for Prime Day.

JBL Xtreme 2 | was $429.95, now $149.99 (save 65%)

JBL’s Bluetooth speakers are mega-popular for their power and versatility, but any great portable speaker can often set you back a few $$$. This amazing deal on the JBL Xtreme 2 is very welcome, then, saving you an amazing 65% on the waterproof device.

Sony HT-S400 2.1ch Soundbar | was $299.99, now $178 (save 41%)

Sony is a giant in the home audio world for good reason, so it’s great when one of its products pops up in a sales event. The Sony HT-S400 soundbar with S-Force PRO Front Surround and Dolby Digital is cheaper for a limited time, with 41% off for Prime Day.

Today’s best JBL and Sony deals

Sony HT-A5000 Soundbar

View Deal

See all prices

JBL Bar 1000

£999.99

View Deal

See all prices

JBL Boombox 3

£989.99

View Deal

See all prices

(Image credit: Anete Lusina)

JBL vs Sony: Design

On a purely aesthetic level, Sony wins out over JBL. While JBL soundbars are sleek and simple, its Bluetooth speakers are on the flashier side, with various bright color choices and rugged builds that show off their toughness against water, dust, and other nasty things. Sony, on the other hand, has a greater variety of options, with some that match JBL’s more fun look and others that offer greater style points.

(Image credit: JBL)

JBL vs Sony: Bluetooth speakers

As previously stated, JBL’s Bluetooth speakers can look a little utilitarian, and the target audience seems to be those who want to take their speakers outside of the home rather than those who want their tech to blend into the rest of their decor. That said, their offering of the best outdoor speakers is second-to-none, and the JBL Clip 4 is one of our top choices for bathroom speakers.

Sony’s range, on the other hand, ranges from the basic to the luxury, with the black and gold of the RA5000 and RA3000, in particular, showing that Bluetooth speakers can be just as attractive as any other home audio equipment. Both brands also offer what they call ‘party speakers’, which tend to be on the larger side and with additional lights.


  • Verdict: Sony’s Bluetooth speakers win out on aesthetics and range, with rugged speakers that match JBL’s alongside speakers with more of a luxury feel.

JBL Clip 4

Sony RA3000

Sony LSPX-S3 Glass Sound Speaker

(Image credit: Sony)

JBL vs Sony: Soundbars

The entry-level soundbar from Sony is the HT-S100F 2-ch Built-in Tweeter Soundbar, which currently sells for $130 at full price. If you want a soundbar with the best subwoofer included (which we recommend for the best experience), then the cheapest you will pay is £280 for the HT-S350 2.1-ch Soundbar.

At the other end of the scale, you can grab the HT-A7000 7.1.2-ch Dolby Atmos Soundbar for $1,400 (subwoofer not included) for a far more expansive sound profile and Atmos for spatial audio or the HT-Z9F 3.1-ch Dolby Atmos/ DTS:X Soundbar for $900 (subwoofer included). 

JBL, on the other hand, charges a little more for the equivalent of Sony’s HT-S100F – just under $200 for the JBL Bar 2.0 All-in-one (MK2). The Bar 2.1 Deep Bass (MK2), which adds a subwoofer to the mix, sells for $350. This is indeed pricier than Sony’s entry-level speakers, but the closest match to its rival’s top-price soundbar – the JBL Bar 1000 7.1.4-ch soundbar with Dolby Atmos/DTS:X, is cheaper at $1,200.

JBL then has an ace up its sleeve, with the Bar 1300X 11.1.4-ch soundbar selling for close to $1,700. The soundbar, along with the Bar 700, Bar 800, Bar 1000, and Bar 9. 1, all come with detachable rear speakers, turning them into basic surround sound offerings.

(Image credit: JBL)

JBL vs Sony: Home cinema

JBL has its own premium audio line in the UK that includes high-end floor-standing speakers, bookshelf speakers, in-built systems, and other components of the finest surround sound systems. Unfortunately, the full range has not found its way to the US yet, and can only be bought in-store in the UK. 

That doesn’t mean that you can’t build a system using JBL speakers, though, with the best bookshelf speakers, standalone floor-standing speakers, subwoofers, and more for you to DIY a brilliant system.

The best surround sound offering from Sony is the HT-A9 High-Performance Home Theater System, which we scored highly during testing. It doesn’t come cheap, however, priced at a premium $2,000 for four speakers and a receiver. Outside of this, you can grab various rear speakers compatible with Sony soundbars, as well as standalone subwoofers and receivers.


  • Verdict: While Sony has the brand recognition and our favorite surround sound offering in the HT-A9, we have a real soft spot for JBL’s soundbars with detachable surround speakers, allowing those with a lack of space or willing to wire together multiple devices to have a solid surround sound experience.

Sony HT-A9 Speaker System

JBL Bar 800

Sony HT-A7000

(Image credit: JBL)

JBL vs Sony: Our verdict

JBL and Sony both hold a specific place in the home audio world, and comparing them is somewhat a case of splitting hairs. However, when considering their different target audiences, commitment to sound over aesthetics and vice versa, and their options across different price points, some trends seem to emerge.

Those looking for a tough speaker that can be taken out of the house or used for outdoor parties might do better with something from JBL, but Sony has more choice when it comes to Bluetooth speakers that look good in a space. For home theater audio, Sony wins out for us with surround sound, but we count JBL’s offerings as among the best soundbars for their versatility.

JBL vs Sony – which one is best for you?

If you’ve been looking for the perfect speakers or home audio equipment at any time during the last couple of decades, we’re certain that two brand names will come up again and again. JBL and Sony are giants in the space, offering a huge range of devices for both casual listeners and audiophiles alike.

Because they have both been in the game so long, it can feel like they offer similar solutions, and it can be hard to choose between them as a result. Do you want something cheap that does the job? Or something that will blow your existing home theater system out of the water? Both Sony and Bose have answers to both, but there are small details that differentiate them. 

In this guide, we will explore those differences, as well as which we would recommend based on your existing set-up and priorities. You can also head to our guide to the best surround sound systems for more comparisons.

Amazon Prime Day ’23 speaker deals

Now that you’ve read about the differences between JBL and Sony speakers, you may be interested in some of the best bargains and deals available this Amazon Prime Day. The sales event takes place over 11-12 of July, and we will be posting the best of the best right here, so bookmark this page to avoid missing out.

Sony SRS-XG300 Portable Bluetooth Speaker | was $349.99, now $198 (save 43%)

We discuss the merits of both Sony and JBL Bluetooth speakers in the guide below, but sometimes a great deal can help to sway you. We love the look of the Sony SRS-XG300 portable speaker, and it’s also a bargain with 43% off for Prime Day.

JBL Xtreme 2 | was $429.95, now $149.99 (save 65%)

JBL’s Bluetooth speakers are mega-popular for their power and versatility, but any great portable speaker can often set you back a few $$$. This amazing deal on the JBL Xtreme 2 is very welcome, then, saving you an amazing 65% on the waterproof device.

Sony HT-S400 2.1ch Soundbar | was $299.99, now $178 (save 41%)

Sony is a giant in the home audio world for good reason, so it’s great when one of its products pops up in a sales event. The Sony HT-S400 soundbar with S-Force PRO Front Surround and Dolby Digital is cheaper for a limited time, with 41% off for Prime Day.

Today’s best JBL and Sony deals

Sony HT-A5000 Soundbar

View Deal

See all prices

JBL Bar 1000

£999.99

View Deal

See all prices

JBL Boombox 3

£989.99

View Deal

See all prices

(Image credit: Anete Lusina)

JBL vs Sony: Design

On a purely aesthetic level, Sony wins out over JBL. While JBL soundbars are sleek and simple, its Bluetooth speakers are on the flashier side, with various bright color choices and rugged builds that show off their toughness against water, dust, and other nasty things. Sony, on the other hand, has a greater variety of options, with some that match JBL’s more fun look and others that offer greater style points.

(Image credit: JBL)

JBL vs Sony: Bluetooth speakers

As previously stated, JBL’s Bluetooth speakers can look a little utilitarian, and the target audience seems to be those who want to take their speakers outside of the home rather than those who want their tech to blend into the rest of their decor. That said, their offering of the best outdoor speakers is second-to-none, and the JBL Clip 4 is one of our top choices for bathroom speakers.

Sony’s range, on the other hand, ranges from the basic to the luxury, with the black and gold of the RA5000 and RA3000, in particular, showing that Bluetooth speakers can be just as attractive as any other home audio equipment. Both brands also offer what they call ‘party speakers’, which tend to be on the larger side and with additional lights.


  • Verdict: Sony’s Bluetooth speakers win out on aesthetics and range, with rugged speakers that match JBL’s alongside speakers with more of a luxury feel.

JBL Clip 4

Sony RA3000

Sony LSPX-S3 Glass Sound Speaker

(Image credit: Sony)

JBL vs Sony: Soundbars

The entry-level soundbar from Sony is the HT-S100F 2-ch Built-in Tweeter Soundbar, which currently sells for $130 at full price. If you want a soundbar with the best subwoofer included (which we recommend for the best experience), then the cheapest you will pay is £280 for the HT-S350 2.1-ch Soundbar.

At the other end of the scale, you can grab the HT-A7000 7.1.2-ch Dolby Atmos Soundbar for $1,400 (subwoofer not included) for a far more expansive sound profile and Atmos for spatial audio or the HT-Z9F 3.1-ch Dolby Atmos/ DTS:X Soundbar for $900 (subwoofer included). 

JBL, on the other hand, charges a little more for the equivalent of Sony’s HT-S100F – just under $200 for the JBL Bar 2.0 All-in-one (MK2). The Bar 2.1 Deep Bass (MK2), which adds a subwoofer to the mix, sells for $350. This is indeed pricier than Sony’s entry-level speakers, but the closest match to its rival’s top-price soundbar – the JBL Bar 1000 7.1.4-ch soundbar with Dolby Atmos/DTS:X, is cheaper at $1,200.

JBL then has an ace up its sleeve, with the Bar 1300X 11.1.4-ch soundbar selling for close to $1,700. The soundbar, along with the Bar 700, Bar 800, Bar 1000, and Bar 9.1, all come with detachable rear speakers, turning them into basic surround sound offerings.

(Image credit: JBL)

JBL vs Sony: Home cinema

JBL has its own premium audio line in the UK that includes high-end floor-standing speakers, bookshelf speakers, in-built systems, and other components of the finest surround sound systems. Unfortunately, the full range has not found its way to the US yet, and can only be bought in-store in the UK. 

That doesn’t mean that you can’t build a system using JBL speakers, though, with the best bookshelf speakers, standalone floor-standing speakers, subwoofers, and more for you to DIY a brilliant system.

The best surround sound offering from Sony is the HT-A9 High-Performance Home Theater System, which we scored highly during testing. It doesn’t come cheap, however, priced at a premium $2,000 for four speakers and a receiver. Outside of this, you can grab various rear speakers compatible with Sony soundbars, as well as standalone subwoofers and receivers.


  • Verdict: While Sony has the brand recognition and our favorite surround sound offering in the HT-A9, we have a real soft spot for JBL’s soundbars with detachable surround speakers, allowing those with a lack of space or willing to wire together multiple devices to have a solid surround sound experience.

Sony HT-A9 Speaker System

JBL Bar 800

Sony HT-A7000

(Image credit: JBL)

JBL vs Sony: Our verdict

JBL and Sony both hold a specific place in the home audio world, and comparing them is somewhat a case of splitting hairs. However, when considering their different target audiences, commitment to sound over aesthetics and vice versa, and their options across different price points, some trends seem to emerge.

Those looking for a tough speaker that can be taken out of the house or used for outdoor parties might do better with something from JBL, but Sony has more choice when it comes to Bluetooth speakers that look good in a space. For home theater audio, Sony wins out for us with surround sound, but we count JBL’s offerings as among the best soundbars for their versatility.

PORTABLE SPEAKER SONY SRS-XB43 Blue OR JBL Charge 3 Gray – review, comparison

We announce the start of a review of two popular wireless speakers from Sony and Jibiel. Which model will be better in terms of main parameters: SRS-XB43 Blue or Charge 3 Gray? Read, compare, choose.

Useful info: What are portable speakers – how to choose a portable speaker according to 11 parameters The control buttons are located on a neat rubber strip at the top of the device.

LED side lighting. In addition to it, in the active state, the speakers also glow. Connectors are hidden on the back of the case under a rubber cap.

Sony SRS-XB43 Blue, although portable, weighs almost 3 kg. But it thoroughly added power, and in terms of sound it is one of the loudest among the latest Sony acoustic developments.

Sound

The manufacturer promises super-developed basses and vocals that are not inferior to them in quality. The sound design of a portable speaker is built according to the scheme:

  • left and right passives,
  • middle 2 woofers,
  • on the sides of them are tweeters for transmitting high frequencies.

The “Extra Bass” technology is used to work out the lower range of sounding tracks. Double passives allow you to listen to powerful bass.

LIVE SOUND mode can be activated. Then the column will turn on the propagation of the sound wave over a wider area. Music can be heard well even in the remote corners of a large room or on the street.

The SRS-XB43 uses rectangular cones. Thanks to this form, the bass has become more powerful, the middle of the composition does not “fall through”, and the vocals are even more clear and natural. The diffuser is covered with a special mica that reinforces the speaker. This gives music lovers a clear sound at maximum volume.

Power

The built-in battery allows you to listen to music without interruption and recharging the speaker for about a day. But with the “Extra Bass” + backlight turned on, you can count on 14 hours of operation without additional recharge.

Charging a music device is as simple as possible.

  1. We take the adapter from the kit.
  2. Insert one end of the USB Type-C cable into the corresponding connector on the speaker.
  3. We connect the charging block to the socket.

Charging will be completed in ≈ 5 hours. The power supply time depends on the degree of “depletion” of the battery.

The speaker is also equipped with a standard usb connector, to which you can connect a smart phone to charge the battery.

Charging details are described here: 2 effective ways to properly charge your portable speaker 0008

If you activate the Party Connect option, you can connect up to 100 pieces to the device. other columns. Full synchronization is available not only for tracks, but also for lighting;

  • NFC

A small circle with a corresponding inscription on the case says that the device can be paired with other gadgets that support NFS with one touch.

The SRS-XB43 can also be connected via wires. To do this, the column provides USB-C, USB-A and 3.5 mm mini-jack connectors.

Waterproof

The device is resistant to moisture and dust. The specifications indicate the protection standard IP67. This means that the column will withstand immersion to a depth of 1 meter for 30 minutes or less without loss of functionality.

SRS-XB43 can be taken to the beach, used by the pool, even washed when needed to clean the fabric surface. The device is not afraid of drops, sand, and other contaminants.

The only thing is to make sure that the rubber plug tightly closes the connectors. This is important to ensure that the device is completely waterproof and dustproof.

Accessories

The forty-third SRS-XB can be used in both horizontal and vertical positions. Set up the column as you like.

One of the main features of the model is the presence of multi-colored illumination. Moreover, 2 LED strips on the sides of the device do not just glow, they, together with the speakers, pulsate, shimmer and light up in turn or all together to the rhythm of the music.

By installing the Music Center and Fiestable smart apps, you can play around with the sound and backlight settings. The latest program allows you to use gestures on the smart screen to control audio playback and lighting effects.

The “hands-free” function allows you to receive calls and carry on a conversation using the speaker without holding the smart phone in your hands. True, without the use of headphones, negotiations will be heard not only by you, but also by others.

JBL Charge 3 Gray

An 800-gram model in a recognizable neat barrel design. The case is sheathed in a tactilely pleasant woven material, rubberized plastic is used for individual elements. On the sides there are 2 radiators with the JBL logo. You can use the column even in a horizontal, even in a vertical orientation: there are “legs” both below and on the sides.

Control buttons on top:

  • bluetooth;
  • volume control;
  • synchronization with other brand speakers;
  • playback control (play/pause).

Buttons are convex and easy to find even in low ambient light. The ports at the back are covered with a massive plug. The 5-position charge indicator is located at the top of the column footboard.

Sound

The sound in Charge Three is on par, well balanced. High quality sound is provided by two 50 mm speakers with a total power of 20 watts.

On both sides of the body are passives that are responsible for the output of rich bass, which also vibrate to the music.

Model “Jibiel” sounds with a solid volume and has a serious margin of volume. Low and high frequencies are played well even at high volume.

Suitable for listening to tracks both indoors and outdoors.

For review: Top 6 best JBL portable speakers – JBL portable speakers rating Charging time is ≈ 4.5 hours. After that, the speaker will be able to play up to 20 hours without recharging.

Third Charge comes with a microUSB charging cable and a power supply + 2 interchangeable plugs for English and Euro sockets.

The column can be used as a power bank and energize the smart battery, for example, on the road. Six thousand mAh is enough for 2 full charges of an average mobile phone. Gadgets connect with each other using a USB cable.

Connection

You can use both wireless and wired connection with the speaker. In the first case, you need Bluetooth. The Charge 3 uses version 4.1. Bluetooth connects other JBL speakers and up to three devices from which you can start the Mouzon. Let’s say three smart phones or tablets.

In the second, connectors:

  • mini-jack for headphones, etc.;
  • micro usb for charging;
  • USB to output current to smart.

Step-by-step manual: How to connect a bluetooth speaker to your phone: 2 proven options for 2 OS

Water resistance

Thanks to the rubberized shell, you can listen to your favorite tracks on the speaker even in wet weather, in rain or snow. The device is not afraid of getting wet or dirty.

Charge 3 is IPX7 waterproof and dustproof. The musical “barrel” can be placed near water sources (sea, swimming pool, etc. ), briefly submerged under water (up to 30 minutes and not deeper than 1 meter). Before doing this, do not forget to close the rubber plug tightly so that moisture does not damage the device connectors.

By the way, the column does not sink, but easily floats to the surface. So if you accidentally fall into the river, you can easily “rescue” it without diving under water.

Additional features

What else “Charge 3” will please users:

The presence of a microphone – thanks to noise and echo cancellation, clear sound is provided during phone calls.

Support for JBL Connect – you need to install an application with the same name on your smart phone, and you can combine several speakers into one music system without wires and troubles.
The ability to connect several gadgets from which you can output tracks in turn. Convenient if you have a group of friends and want to listen to music from different playlists.

That’s it. We end the comparison with conclusions. Let us recall the main parameters of the two competing speakers:

Models of the two brands came to the finish line on an equal footing. They are not inferior to each other either in sound quality, or in autonomy, or in the protection of the body from water. The price tag is also about the same. Each option boasts its own features, such as the backlight from Sony or the power bank column from JBL. Therefore, everyone makes a choice for himself: what design do you like more, what chips are needed, and what can you do without.

For those who want to save money: Rating of budget portable speakers under 1500 UAH: top 10

Free STL file JBL, Sony 0010

Best 3D Printer Files in Home Category

Rabbit storage box

1.25 €

Lamp

4. 54 €

Knob for bath

Free

Nespresso Capsule holder

Free

LiL STOOL

Free

Accordion Vase 2

0,50 €

Smartphone cable holder – bedside lamp

Free

Bird Swimming

2,50 €

Bestsellers in the Home category

Wine bottle holder “Dragon”

2,27 €

Modular storage box system with quick print

€5.87

Molten Girl

3.45 €

Wall shelf “Jamor mushroom”

2,60 €

Dragon Can Koozie, holder for 12 lb can

1. 82 €

CUTE FAIRY HOUSE FOR YOUR GARDEN – WITHOUT SUPPORTS

2.03 €

Puke Emoji Floating Pencil Holder

2 €

Dragon box, heart box

1.59 €

“Valentine bear” ornament printed in place without support

2.27 €

Lithophane Box (Holds 5 Litho Panels)

3.63 €

Birdhouse Surf Shop – no supports needed/two sizes and compatible with Prusa Mini

4.02 €

V8 + V12 + V16+ STANDARD AND MINI CAN COOLER / FITS MOST PRINTERS


€5.44

-10%

4.90 €

Gothic tower Stackable self-watering moss pole

20 €

Wall shelf “Ostrea Fungus”

2,60 €

TEDDY TRAY, solutions for serving decorative items, decorations and confectionery

2.

Page 1 of 18
1 2 3 18